Furniture Work of Urban Health Center with Maternity home at T.P.S.No.-28(Althan - Bhatar), F.P.No.-107 in South West (Athwa) Zone

SR. DTS DESCRIPTION QUANTITY UNIT SOR RATE- AMOUNT

1 NO. Providing & fixing L- type table (Size:- 1.650m x 1.900m x 0.750m) with table top would be 38mm 5.00 Nos 24-2534,015.00

As Permade outWork

Interior 18mmfor Commercial Plywood.

Health Centre All outer69.

DTP Scheme surfaces

FP-18 to be finished using 1mm thick

Providing & Fixing table (Size:- 1.200m x 0.600m x 0.750mm) with 38mm thick Commercial

Plywood with 1.0mm thick lamination sheet fitting with valsadi teak woood. Vertical support should

be made by Commercial Plywood & make 1 nos. drawers on one side. All Exterior surfaces of the

drawer would be finished in 1mm thick laminate & all internal surfaces would be finished with 1mm

thick laminate as approved by architect including lock, drawer channel, handle, keyboard trey, cable

2 manager, Space for CPU with french polish labour work with nescessary hardware etc. completed as 11.00 Nos 17,774.00

per site incharge instruction and as per details drawing. Commercial Plywood Make- (Echotech,

Century, Green), Laminate Make- (Century, Green, Royal Touch). (Basic rate:- Outer Laminate-1600

Rs/sqft & Inner Laminate-560 Rs/sqft) (DWG No. ID/02)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Storage Unit made out 18mm commercial plywood, 20mm thick shutters made with 18 mm thick

commercail plywood, back side surface of the unit is to be made with 18mm thick commercial ply

the outer surfaces would be finished using 1mm thick laminate and all internal surfaces would be

finished using 1mm thick laminate as approved by architect. Work Table Top Borded and edged

should be made valsadi teak wood borders with french polish. Storage unit as per measurement

3 from shutter side, including all necessary premium quality hardware & fittings like screw, buffer, 9.00 SM 14436.00

lock, handle, stopper, magnet, chain etc. completed as per architect’s drawing & Instructed By Site

Engineer (size:- 0.900m x 0.450m x 0.750m) Commercial Plywood Make- (Echotech, Century,

Green), Laminate Make- (Century, Green, Royal Touch). (Mode of Measurement: For Measurement,

Height of Storage * Length of Storage will be Calculated) (Basic rate:- Outer Laminate-1600 Rs/sqft &

Inner Laminate-560 Rs/sqft) (DWG No. ID/03)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Providing & fixing cupboard made out of 18mm commercial plywood, the upper surface would be

finished using 1mm thick laminate and bottom surface would be finished using 1mm thick laminate

as approved by architect. Borded and edged should be made valsadi teak wood borders with french

polish.The vertical & horizontal shelves are to be made with 18mm thick commercial plywood. The

surface would be finished using 1mm thick laminate as approved by architect, 26mm thick cupboard

shutters are made using 18 mm thick commercial plywood openable shutter with good quality

4 handles including all necessary premium quality hardware & fittings like screw, buffer, hinges, 24.00 SM 11,917.00

handles, channels, stoppers, chains, bonding material etc. as per architect’s drawing & Instructed By

Site Engineer. (size: 2.100m x 0.900m x 0.450m) Commercial Plywood Make- (Echotech, Century,

Green), Laminate Make- (Century, Green, Royal Touch). (Mode of Measurement: For Measurement,

Height of Storage * Length of Storage will be Calculated) (Basic rate:- Outer Laminate-1600 Rs/sqft &

Inner Laminate-560 Rs/sqft) (DWG No. ID/04)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Check up bed with storage & footrest 38mm thick, made out 18mm Commercial Plywood, central

partition of 18mm. 20mm thick shutters made with 18 mm thick, back side surface of the unit is to

be made with 12 mm thick , the outer surfaces would be finished using 1mm thick laminate and all

internal surfaces would be finished using 1mm thick laminate as approved by architect. Top Borded

and edged should be made valsadi teak wood borders with french polish. Storage unit as per

measurement from drawer and shutter side, including all necessary premium quality hardware &

5 fittings like screw,bonding material, lock, drawer channel, handle,magnets, chain etc. completed as 10.00 Nos 33,198.00

per architect’s drawing & Instructed By Site Engineer. (size: 1.800m x 0.750m x 0.750m.) Commercial

Plywood Make- (Echotech, Century, Green), Laminate Make- (Century, Green, Royal Touch). (Basic

rate:- Outer Laminate-1600 Rs/sqft & Inner Laminate-560 Rs/sqft) (DWG No. ID/05)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Providing & fixing Manual Adjustable MS bed for manufactured from prime quality ERW tubular

frame & 16 gauge CRCA sheet. Overall size LxBxH (2.00x0.760x.760) mt. including of cotton 4" inch

form mattress with cover including all fitting & fixtures as per attached dwg & instructed by in

charge consultant.

As per SMC Approval Rate

Providing & Fixing lab/vaccine table (Size:- 1.800m x 0.800m x 0.750mm) with 38mm thick

Commercial Plywood with 1.0mm thick lamination sheet fitting with valsadi teak wood beading.

Vertical support should be made by Commercial Plywood & make 4 nos. drawers & 2 nos shutter

with french polish labour work with nescessary hardware & fitting lock, handle, channel set,

magnet, chain, foot rest etc. completed as per site incharge instruction and as per details drawing.

Commercial Plywood Make- (Echotech, Century, Green), Laminate Make- (Century, Green, Royal

Touch). (Basic rate:- Outer Laminate-1600 Rs/sqft & Inner Laminate-560 Rs/sqft) (DWG No. ID/06)

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

GANG CHAIR - 3 SEATER: Providing and fixing 3-seater gang sitter with moulded foam, with

Aluminium casting and metal waterfall seats, PU 10mm thick pads on seat & back (chargeable), P.C.

8 frame & with perforation. as per architects selection,and complete the work satisfactorily as per 70.00 Nos 14,122.88

instruction of architect or Engineer-in charge.BRANDS : COHUMAN , FEATERLITE , HAYWORTH

Ref Rate from Valak Health Centre, East Zone-B

GANG CHAIR - 2 SEATER: Providing and fixing 2-seater gang sitter with moulded foam, with

Aluminium casting and metal waterfall seats, PU 10mm thick pads on seat & back (chargeable), P.C.

9 frame & with perforation. as per architects selection,and complete the work satisfactorily as per 15.00 Nos 10,699.15

instruction of architect or Engineer-in charge.BRANDS : COHUMAN , FEATERLITE , HAYWORTH

SR. DTS DESCRIPTION QUANTITY UNIT SOR RATE- AMOUNT

NO. NO. Ref Rate from Valak Health Centre, East Zone-B 24-25 & RA

Providing & fixing at all floor levels, both face polished machine cut edge Marble slab for Cupboard/

10 Store Shelves joined with grey/White cement slurry (1:1) incl. Rubbing & polishing etc. complete. 29.00 SM 1050.00

(M.R.)( Basic Cost- Rs. 450/S.M.)

Providing and constructing sandwitch type Granite stone platform 0.6 mt. wide & 0.75 mt. height,

including one end side granite stone (Double Polish) of 1.25 mt. height & front granite stone patti of

10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing

11 smooth with cement slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved 31.00 RM 3128.00

quality and make with required all fitings & fixitures etc. comp as per instruction given by site in

charge at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)

Prov. & Fixing Laminated Door of Marble / wall storage shutter with 3"x1.5" teakwood frame

using with 18mm th. commercial plywood, 1mm th. laminate, teakwood edge biding, ss

12 handles, hinges, magnate, lock & necessary hardware, serews materials etc. complete as 40.00 SM 5000.00

per instruction by engineer in charge. (DWG No. ID/08)

Ref Rate From Renovation & Repairing of Furniture Works in various Properties of Surat Municipal

Corporation in West Zone (Rander).(ITEM RATE TENDER)

Prov. & Fix wooden Notice board with Righting laminate board finish using 12mm th. Back

commercial plywood aprooved make, 01mm th. SF finish laminate, teakwood framing &

necessary hardware materials etc. inside and liping french polish finish complete in all

respects by engineer in charge complete.

Ref Rate From Renovation & Repairing of Furniture Works in various Properties of Surat Municipal

Corporation in West Zone (Rander).(ITEM RATE TENDER)

Providing, Making & Fixing Table of Size Required Size using 40mm MS pipe frame structure. All M.S

frame structure should be powder coated. The table top would be 38mm thick, made out 18mm

commercial plywood. Work Table Top Borded and edged should be made valsadi teak wood borders

with french polish. All outer surface to be finished using 1mm thick laminate & bottom surface to be

finished with 1mm thick as approved by architect including with necessary hardware like screw,

14 khilli, Pop up box, table stud etc. completed as per site in charge instruction and as per details 1.00 Nos 28,207.00

drawing. Commercial Plywood Make- (Echotech, Century, Green), Laminate Make- (Century, Green,

Royal Touch) (Size:- 2.000m x 0.900m x 0.750m) (Basic rate:- Laminate-1600 Rs/sqft) (DWG No.

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Providing, Making & Fixing Table of Size Required Size using 40mm MS pipe frame structure. All M.S

frame structure should be powder coated. The table top would be 38mm thick, made out 18mm

commercial plywood. Work Table Top Borded and edged should be made valsadi teak wood borders

with french polish. All outer surface to be finished using 1mm thick laminate & bottom surface to be

finished with 1mm thick as approved by architect including with necessary hardware like screw,

15 khilli, pop up box, table stud etc. completed as per site in charge instruction and as per details 2.00 Nos 19,105.00

drawing. Commercial Plywood Make- (Echotech, Century, Green), Laminate Make- (Century, Green,

Royal Touch) (Size:- 1.400m x 0.900m x 0.750m) (Basic rate:- Laminate-1600 Rs/sqft) (DWG No.

As Per Interior Work for Health Centre DTP Scheme 69. FP-18

Providing & Fixing table (size:- 2.400m x 0.750m x 0.750m) with table top would be 38mm thick,

made out 18mm commercial plywood. All outer surface to be finished using 1mm thick laminate &

bottom surface to be finished with 1mm thick as approved by architect. Vertical support should be

made by Commercial Plywood & Valsadi teak wood Beading with french polish labour work with

necessary hardware like khilli, screw, pop up box etc. completed as per site in charge instruction and

as per details drawing. Commercial Plywood Make- (Echotech, Century, Green), Laminate Make-

(Century, Green, Royal Touch) (Basic rate:- Laminate-1600 Rs/sqft) (DWG No. ID/18.2)

As per SMC Approval Rate

Providing & Fixing table (size:- 1.500m x 0.750m x 0.750m) with table top would be 38mm thick,

made out 18mm commercial plywood. All outer surface to be finished using 1mm thick laminate &

bottom surface to be finished with 1mm thick as approved by architect. Vertical support should be

made by Commercial Plywood & Valsadi teak wood Beading with french polish labour work with

necessary hardware like khilli, screw, pop up box etc. completed as per site in charge instruction and

as per details drawing. Commercial Plywood Make- (Echotech, Century, Green), Laminate Make-

(Century, Green, Royal Touch)(Basic rate:- Laminate-1600 Rs/sqft) (DWG No. ID/18.1)

As per SMC Approval Rate

Providing and fixing Hospital Curtain of 8'-0" height with 1ft Mesh Curtain at Top with necessary

Brackets, Curtain Track with Accessories complete. Curtain to be as per approved sample. All the

work complete as per the detailed drawing, Make up sample and instruction of Architect/ EIC. Fabric

should be Water Repellant, Antifungal/ Antibacterial and Fire Retardant. Curtain Track should be

18 bendable, good quality runner for smooth movement of curtains. Suspension Bracket should be 124.00 SM 4338.58

made of powder coated Aluminium Profile and installed as per site height (incl. Suspending Rods)

specifications and finished and complete the work satisfactorily as per instruction of architect or

Engineer-in charge And as per "Architecture" detail,

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

SR. DTS DESCRIPTION QUANTITY UNIT SOR RATE- AMOUNT

NO. NO. Acoustical Panel Finish: Providing and fitting of acoustic panels with Standard size & thickness of 24-25 & RA

1220*2420*9mm of brand Artois, Smart Pannel, Senses Akustik only in Gradient Pattern. Panels

should have Sound Absorption coefficient (NRC) 0.84. Formaldehyde emission standards of GB18580-

2001 class E1, it should be a green material with asbestos-free, non-toxic and tasteless gas under

extreme temperature, protecting the ozone layer, non-irritant and recyclable. acoustic panels have

19 to be Fire-resistant as per China standard class B1. Good insulation properties, to prevent 96.00 SM 2921.36

transmitting the heat from outdoor to indoor directly as partition or and ceiling, saving 35% of

energy, extending the life of air conditioning.including all acceessories, material, labour etc. and

complete the work satisfactorily as per instruction of architect or Engineer-in charge And as per "

Architecture" detail.

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Plain Gypsum Sheet Ceiling: Providing and fixing of Plain Gypsum Sheet Ceiling using 80 mm. x

mm. x 0.50 mm. thick g. i. Ceiling Sections, 15 mm. x 45 mm. x 15 mm. x 0.90 mm. thick

Intermediate Channels, 20 mm. x 28 mm. x 30 mm. x 0.50 mm. thick Perimeter Channels and

mm. x 10 mm. x 0.50 mm thick Ceiling Angles, as per IS 513 & 150 GSM Galvanised finish as per IS

277, including 8 mm Dia. 45 mm long, Zinc coated, CR1 grade Rawl Plugs, 27 mm x 37 mm x 25 mm x

1.60 mm thick Soffit Cleats, 2.64 mm Dia. High Carbon Spring Steel Wire Connecting Clip, confirming

20 to IS 513, 12.50 mm Th. Tapered Edge Gypsum Board Plain, conforming to IS 2095- Part 1: 2011 35.00 SM 800.00

Certified Boards, Screw Fixed to Ceiling Sections, using 25 mm Drywall Screws [material-carbon steel

EN-ISO 7049/50, finish-case hardened Grey Phosphating] at 230 mm c/c on Ceiling Sections &

mm at Periphery of Ceiling. Square and tapered Edges of the boards shall be jointed and finished so

as to have a flush look, including filling and finishing with Jointing Compound, conforming to ASTM

C475, & Joint Paper Tape etc. complete with all Material, Labour with all Lead, Lift and Transport and

complete the work satisfactorily as per instruction of Architect & Engineer-in charge, as per

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Grid Ceiling: Providing and fixing in True Horizontal level 600 mm. x 600 mm. false ceiling in 24 mm

C.B Grid system manufactured by GYPTECH or Eq. Brand using hot dipped galvanized steel Section,

Exposed Surface with pre coated capping, Main Tee of size 24 mm x 32 mm., having 0.30 mm Gauge

at every 1200 mm Center to Center Maximum and Rotary Stitched Cross Tee of size 24 mm x 26 mm,

having 0.30 mm Gauge at every 600 mm. c/c. and Sub Cross Tee of size 24 mm x 26 mm, having

mm Gauge at 1200 mm c/c. and wall angle of size 24 mm x 24 mm., having 0.40 mm Gauge fixed to

21 the periphery of the wall. The above grid is suspended with 50 x 50 x 2 m thk. Jindal or Eq. make 48.00 SM 1600.00

Aluminium Angle fix with necessary Anchor Fastner on Slab Bottom Longer Span with Accessories

such as Nuts, Bolts, Washer, Fastners etc. in both directions. Gyptech Vinyl Laminated Gypsum Panel

Square Edge Ceiling tiles manufactured by GYPTECH or Eq. Make, of size 595 mm x 595 mm x 12 mm

thermal conductivity k = 0.16 W/m.K, having Moisture Resistance & Fire Protection, having lighter,

smoother and more uniform Texture shall be laid evenly. The vinyl finish on the Gypsum panels Seals

out Moisture, Bacteria, Dirt and Odors. Lay in the modulus for the flush look incl. All Materails,

Labour, Scaffolding, etc. complete as per instructions of Architect..

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Providing & Fixing simple 12mm thick commercial Commercial Plywood (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) Rack of size 6' x4' and depth 1'-6" 5 Nos. horizontal partition,

supported 2" x 1" framing with necessary french polish hardware labour etc. as per site incharge

instruction and as per drawing

(SOR SMC - PG. NO-10 It No. 117)

High Back Executive Chairs for HODs & Conference room : Providing and Supplying highback office

chair of Aluminium dia cast base and armrest,50 density high mould foam in seat and back, multi

funtional mechenism, bifma class IV gas lift and p.a castors. Liven HB Chair, Backrest and headrest

shell finish in high gloss black, Headrest height can be adjusted, Armrest pad finish in polish finish,

23 Armrest height and width can be adjusted, backrest and seat cushion in single-stitched semi-aniline

artificial leather, Seat shell finish in high gloss black, Seat depth and height of sitting can be adjusted,

Mechanism cover in silver smooth powder coating. as per selection and complete the work

satisfactorily as per instruction of architect or Engineer-in charge. Brands: Bristol Liven, Como,

Couhman, Sunon, Featherlite, Steelcase, Amber Luxor, Hayworth

As per Approved Rates of SMC HQ

Mid Back Chairs for Conference Hall Extra: Providing and fixing of midback office chair of pu rexin in

seat and back. Revolving chair with Back full nylon injected flat back with perforated in 10mm round

dia, dual cantilevered arms with upholstery back dual upholstered, back height adjustable,

24 PU/rubber double castor as per selection and complete the work satisfactorily as per instruction of 30.00 Nos 13122.63

architect or Engineer-in charge. Brands: Bristol Liven, Como, Couhman, Sunon, Featherlite,

Steelcase, Amber Luxor, Hayworth

As per Approved Rates of SMC HQ

PVC Chairs for Visitors of HODs, Nurse Station, Dr. Duty Rooms: Providing and fixing PVC Arm Chairs

having Premium Matt Finish with soft feel texture finish, having Size: 600 mm D * 560 mm W *

25 mm H, as per the Specified Company of HOF, Feather Light, Wipro, Godrej, Neelkamal, Supreme 42.00 Nos 1500.00

etc.as per selection and complete the work satisfactorily as per instruction of architect or Engineer-in

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Patients Stools (Revolving): Providing and fixing of Patient Examination Stools of M.S Dia Cast Base

with Epoxy Powder Coating and SS 316 Seats, Revolving Stools Fitted with M.S Ring for strength &

Foot Rest, Four Legs M.S Tubular construction as per the Specified company of HOF, Feather light,

26 Wipro, Godrej, Xylus, TSI etc. or Equivalent as per selection and complete the work satisfactorily as 29.00 Nos 1782.00

per instruction of architect & Engineer-in charge. (Size Total Height of Stool =23 inches, Seat

Diameter = 15 inches, Adjustable Height = 19-23 inches, Wheel base width= 18 inches.)

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Plastic Chairs with Cusioning for Visitors of HODs, Nurse Station, Dr. Duty Rooms: Providing and

sulppying plastic chair with cusining of High-grade 100 percent virgin polymers which ensure its

longevity,Ergonomically designed plastic chair for home with a lacquered finish, heavy-duty armrest,

27 back and seat cushion made up of velvet upholstery and PU material for maximum comfort as per 29.00 Nos 2,139.83

selection and complete the work satisfactorily as per instruction of architect or Engineer-in charge.

BRANDS :Supreme Ornate

SR. DTS DESCRIPTION QUANTITY UNIT SOR RATE- AMOUNT

NO. NO. Ref Rate from Valak Health Centre, East Zone-B 24-25 & RA

PVC Dustbin: Providing & Supplying of 8 to 10 in dia and 12 to 15 inc ht P.V.C. Dustbin of brand

28 cello,pigeon etc. complete as per selection & directed by the Architect and approved by the 29.00 No 855.93

Engineer in Charge.

Ref Rate from Valak Health Centre, East Zone-B

S.S 304 Grade Dustbin: Providing & Supplying of S.S 304 GRADE . Dustbin of brand SATYAKI,pigeon

29 etc,having size of 10 In. Diameter & 14" Height etc. complete as per selection & directed by the 29.00 No 1,403.73

Architect and approved by the Engineer in Charge.

Ref Rate from Valak Health Centre, East Zone-B

Outdoor Floor Mat: Providing and fixing outdoor floor matt of brand comforts or as per selection

30 and complete the work satisfactorily as per instruction of architect or Engineer-in charge.(basic size 3.00 No 2,995.76

of matt is 1.80 x 1.20 mt)

Ref Rate from Valak Health Centre, East Zone-B

Indoor Floor Mat: Providing and fixing indoor floor matt of brand my floor or as per selection and

31 complete the work satisfactorily as per instruction of architect or Engineer-in charge.(basic size of 40.00 No 1,069.92

matt is 1.20 x 0.60 mt)

Ref Rate from Valak Health Centre, East Zone-B

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring

32 treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 50.00 Sqm 1,092.37

cement : 3 coarse sand) finishing with flush pointing in white cement.

SMC SOR, PAGE NO.4,IT NO

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

33 risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 50.00 Sqm 1,135.80

coarse sand) and jointed with white cement slurry.

SMC SOR, PAGE NO.4,IT NO

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with

aluminium section of Hindalco, Jindal , Narmada,Banco or Equivalent approved make

having Poder Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm

having weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm ( top &

bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No.

19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick

prelaminated sheet of Greenlam, Panama or archid make as approved by Engineer-incharge

including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 7.00 SM 3,237.00

SMC SOR, PAGE NO.17,IT NO

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled

partition using medium duty sections of Hindalco,Zindal, Narmada, Banco or

Equivalent approved make having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt

& Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass of

35 approved make including all other necessary fittings and fixtures. Entire work will have 0.00 SM 2,400.00 -

to be made water proof using necessary rubber sectioned wherever required. Gaps all

round the frame to be filled with approved water proof sealent. Bottom portion of doors

both side to be covered with 12mm thick prelaminated particle board of approved

make and quality and as per design.

(A) Same as above but Colour anodized 126.00 SM 2,400.00

SMC SOR, PAGE NO.17,IT NO

WOODEN PARTITION: Providing and fixing of full height solid sandwitch partitions (AS PER

DRAWINGS) using 50 x 50 mm aluminium pipe for framing (minimum grid size of 600 mmx 600mm ),

12mm ply (both sides)of brand greenply ecotech mr,century sainik mr,srg etc, teak wood beading

patti etc. making of rebates and including all hardware items, groove (if shown)50 MM TK , 24 kg

density insulation if required,with all materials,hardwares,ss or powdercoated screws, labour, lead

and wastage,scaffolding etc. complete. And Finished with different materials,and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

Ref Rate from Valak Health Centre, East Zone-B

GLASS PARTITION: Providing and fixing of full height glass partitions (AS PER DRAWINGS) using patch

fitting / U-channels, 12mm clear toughned glass, film work as/drawing including all hardware item

with all material, labour, lead and wastage etc. and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

Ref Rate from Valak Health Centre, East Zone-B

GLASS FILM WORK: Providing & laying Non reflective solar contact film for fixing on glass as

approved colour,design,cutting complete as per instruction by engineer in charge.

R & B SOR CODE: M424 PG NO.

GLASS FOR TABLE TOP: Providing & fixing Glass Table Top using 08mm th.clear glass with crystal

39 edge & necessary hardware materials etc. complete as per instruction by engineer in charge. 54.00 SM 1,144.07

Ref Rate from Valak Health Centre, East Zone-B

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing with necessary

40 accessories & stainless steel dash fasteners , stainless steel bolts etc., of 20.00 Kg 450.00

required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment purpose only

weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

SMC SOR, PAGE NO.11,IT NO

Apply two coats of putty and two coats of primer of approved brand and manufacture on

41 new wall surface to give an even shade including thoroughly brushing the surface free 200.00 S.M 40.59

from mortar dropping and other matter and sand papered smooth.

SMC colour SOR, PAGE NO.4 NO

SR. DTS DESCRIPTION QUANTITY UNIT SOR RATE- AMOUNT

NO. NO. Wall painting (two coats) with plastic emulsion paint of approved brand and 24-25 & RA

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

SMC colour SOR, PAGE NO.4 NO

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor

43 levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to wooden 15.00 No. 859.41

plugs with C.P.brass screws and washers etc. For all Floor

SMC colour SOR, PAGE NO.7 NO

44 Wall Vinyl Sticker 300.00 SQ. FT. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

45 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 300.00 SQ. FT. 38.00

SMC SOR, PAGE NO.13,IT NO 147 (MR)

46 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 300.00 SQ. FT. 22.00

SMC SOR, PAGE NO.13,IT NO 148 (MR)

47 5mm PVC sheet Eco Vinyl (Any size) 300.00 SQ. FT. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

48 Decorative theme base designing & painting with all waterproof materials 54.00 SQ. FT. 63.00

SMC SOR, PAGE NO.13,IT NO 150 (MR)

Providing , fixing, fitting S.S latter of quality SS 304 or with colour powder coating including

49 necessary fixture & Fastaning with scaffolding etc. complete. as per requirement & direction of 120.00 SQ. FT. 1127.97

Engineer In chage

Providing & Fixing standared extruded of aluminium section having size of top & bottom profile

45mm x 25mm x 18 gauge (wt. 0.550 kg per mt), side profile 25mm x 25mm x 18 gauge (wt.

0.350kg/ mt), Handle 60mmx 25mmx 18 guage (0.650kg/mt) with colour powder coated aluminium

frame for mosquito net complete. as per selection, design by architect and engineering in charge for

Pleated Mosquito Net. Aluminium Make: National/ Nalco

SMC approval Rate - TPS 60(Puna), FP-45

Providing and fixing of approved quality Roller blinds using phifer fabric of premium grade, with

roller tube, bottom bar leveller made of extruded aluminium alloy an Idler, Insert Type- Brackets,

PVC chain etc. all complete at all floor and heights as per approved specification. Roller Tube Control,

Clutch, Idler Side by side or single Roller Tube of extruded Aluminium 38mm inner dia - 41mm

outer dia minimum wall thickness of 1.6mm.

Roller blind - roller blind fabric should be made up of 35% FibreGlass, 65% PVC, it should have

51 specific low emissivity treatment and lead free with Greenguard gold certification. It should have 3% 360.00 SM 2124.62

to 5% openness, fabric thickness should be 0.43 mm, mesh weight approx 400 gms/ sqmtr. It should

cut UV rays, with antimicrobial properties preferably with Microban. The fabirc should be Flame

retardant and Lead Free. It should be GreenGuard certified with Gold Standard for low chemical

emissions for indoor use. (Basic rate of Roller blinds- 85 rs/sq.ft.)including all accessories, material,

labour,installation etc..and complete the work satisfactorily as per instruction of architect or

Engineer-in charge..

Ref Rate from Valak Health Centre, East Zone-B

Electrification

Providing and erecting approved make split air-conditioning unit consisting of copper condensing

unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with its accessories by means of extra

supplied proper insulated copper tubing,drain PVC pipes suitable for (cost includes powder coated

Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting.

For 4/5 star Rating of current year

(c) for 1.5 ton capacity

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and

2 8-3-5 control cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity 75.00 mtr 965.56

SITC of 3LCD Lamp based projector having wxga (1280x800) or better resolution with minimum

white brightness of 3800 lumens and color brightness of 3800 lumens. The projector should have

minimum 1HDMI,1VGA input. Having contrast ratio of 15000:1 or more. the projector should have

auto vertical key stone correction of +/- 30 degree and Manual Horizontal of +/-30 degree. the

3 7-11-2. projector should have optical lens, throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual 1.00 Each 33895.60

having focal length 16.9mm to 20.28mm. projector should have features like AV mute slide, quick

corner and split function and should support wireless functionality with inbuilt wifi or wifi dongle.

[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]

SITC of universal Projector mounting kit, with necessary grouting, fasteners etc. with adjustable

4 7-11-2. height and suitable for all types of projectors. [Approved by Competent Authority i.e. not Below the 1.00 6848.81 Each

rank of Executive Engineer ]

SITC of Projector Screen 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Screen, Aspect Ratio-

5 7-12-1 4:3 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 1.00 3379.46 Each

HDMI Cable 1.4: Supports Full HD (1080p) resolution and 3D content. HDMI 2.0: Supports 4K

6 MR resolution at 60Hz and High Dynamic Range (HDR). HDMI 2.1: Designed for 8K resolution, 120Hz 1.00 3000.00 Each

refresh rates (15 mtr.)

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

Supply, Installation, Testing & Commissioning of Indoor 3 MP IP Dome Camera of 1/2.8" or 2.9"

Progressive CMOS Sensor with resolution 30 fps @ 2048x1536 & Manual Vari Focal f = 3- 9 mm Field

of View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30 Mtr Smart IR Min. Illumination 0.1 Lux @ F1.4

(Color), 0.01 Lux @ F1.4 (B/W) 3D Noise Reduction ; P-iris Lens & Digital Image Stabilization ; ONVIF

IP43, CE, FCC Class A, UL listed with all required accessories.

SR. DTS DESCRIPTION QUANTITY UNIT SOR RATE- AMOUNT

NO. NO. Supply, Installation, Testing & Commissioning of Outdoor 2 MP IP Bullet Camera of 1/2.8" or 2.9" 24-25 & RA

Progressive CMOS Sensor with resolution 30 fps @ 2048x1536 & Manual Vari Focal f = 3- 9 mm

Field of View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30/50 Mtr Smart IR Min. Illumination 0.1 Lux

@ F1.4 (Color), 0.01 Lux @ F1.4 (B/W) 3D Noise Reduction ; P-iris Lens & Digital Image Stabilization ;

ONVIF IP66, IK10, CE, FCC Class A, UL listed with all required accessories.

Supply, Installation, Testing & Commissioning of Rack mounted Server Based NVR system with

channel NVR with built-in PoE & VMS Licence. 4 Sata HDD support up to 8 TB each Bay.

Total strorage of 8 TB. The NVR system must be from the same brand as Camera

11 MR Supply, installation, testing and commissioning of 4TB Survellance Hard Disk for storage 2.00 Nos. 9,580.86

SITC of 24 x 10/100/1000BASE-T PO-E ports

4 x Gigabit RJ45/SFP Combo ports

12 Advanced L2 switching and security features 2.00 Nos. 15,399.47

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user interface

13 MR Supply, installation, testing and commissioning of 12U Netwwork / AV Rack 1.00 Nos. 9,595.00

Supply, Installation, Testing & Commissioning of 42" LED Professional Display, 1920 X

14 MR Resolution, 350 CD/M2 Brightness with Videowall Features 24x7 Application with keyboard & 1.00 Nos. 42,500.00

mouse, Wall Mounting Bracket.

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat

cum-boost charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The

charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac

15 8-15-5 with 0.8 load power factor with battery, over/under voltage output with over load & short circuit 1.00 Nos. 82,941.20

protection equipment. The system housed in CRC sheet duly powder coated paint with following

power backup.with MS painted batteries stand, 10% Overload capacity for momentary load.

Supplying & erecting Amplifier having following specification:

Power Output :100 W (RMS):(130 W Max.)

inputs :5 Mics & 2 Aux.

frequency Response :50-15000 Hz+3db

Tone Controls :Cut & Boost type

16 7-3-2. Speaker Matching :4-8-ohms 70- 100 V line 1.00 Nos. 6249.88

LED Meter :5 LED Array.

The amplifier suitable to operate 240V A.C.& 24 volt D.C. (Battery) with automatic changeover from

AC to Battery operation, duly protected by wrong Battery Polarity connection. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

Supplying &, Erecting speaker system comprising 50W handling capacity with frequency response of

55 -200,00Hz & 16 Ohms impedance with high efficiency 2Nos. of 8 inch full range speakers housed

in acoustically suspended enclosure. [[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Providing and erecting cordless microphone with UHF Diversity handheld wireless microphone/caller

wireless complete with receiver and transmitter unit,Cardiod ,polar pattern,dynamic

microphone,LCD display for battery and frequency status and information ,32 preset channels,with

compatible groups of 8 channels,14 hrs.battery life,frequency response 80Hz to 18KHz.,RF sensitivity

<1.0 Uv,image rejection > 55 dB,dynamic range >95 dB and receiver having 32 channels,S/N

ratio>100 dBA,Dynamic range>95 dB,distortion<1% [[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

19 MR Audio Cable 15 Mtr. 1.00 Ea. 5345.22

20 MR Speaker Cable 50.00 Mtr. 134.32

21 MR Cable Manager 10.00 Mtr. 411.17

Executive Engineer,

South West (Athwa) Zone

Signature of the Contractor: Surat Municipal Corporation.