Completion of Pump House for lift irrigation scheme Soth.

Amount

Demolishing cement concrete manually /by mechanical means including disposal of material withen 50mtr lead 1:3:6 or richer Mix

Earth work in excavation by manual means in trenches for foundation ,drains, pipes ,cables etc.(Not exceeding 1.5mtr in width ) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan ,depth up to 1.5mtr including disposal of excavated earth up to 1mtr from cutting edge, disposed earth to be leveled and neatly dressed in:

All kind of soil

Dumping /filling of stone in horizontal on level including cost of stone & all carriage complete.

Providing and laying in position cement concert of specified grade excluding the cost of centering and shuttering. All work upto plinth lent 1:4:8( 1 cement: 4 coarse sand 8 graded stone agg. 20mm nominal size nallah including all carriage complete.

Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering. All work up to plinth level 1:3:6 (1: Cement: 3 coarse Sand: 6graded stone agg. 20mm nominal size) nallah including all carriage complete..

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto150, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering shuttering, finishing and reinforcement with 1:1.5:3(1cement :1.5coarse sand:3 graded stone aggregate 20mm nominal size) including all carriage complete.

Reinforcement for R.C.C work including straightening cutting,bending, placing in position and binding all complete.Hot rolled deformed bars.and all carriages complete.

Cast in situ plum concrete work of nominal mix concrete M-10 grade (total mass of dry nallah aggregate 480kg(max excluding plums) and water 34Kg (max) per 50kg of cement) nominal max size of stone aggregate 20mm, volumetric batching using plum aggregate 20mm, volumetric batching using plum (size over 160mm, split nallah stone or quarry stone) @20% of gross volume upto plinth level excluding cost of form work and including curing and all carriage complete..

Cement concrete flooring 1:2:4 (1cement:2 course sand:4 graded stone agregade) finished with a floatin coat of neat cement including cement slurry ,but excluding soct of nosing of steps etc. complete 50mm thick with 20mm nominal size stone agregate Crushed including all sorts of carriage complete

Centring and shuttering including strutting propping etc,and removal of form work for Walls (any thickness) incld. attached pilasters, buttresses, plinth & string courses etc. incl. form work for suspended floor Foundations etc, Complete job

Structural steel welded in build up section ,trusses and frame work including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer and all complete job

Providing corrugated G.S sheet roofing including vertical / curved surface fixed'with polymers coated J or L hooks , bolts and nuts 8mm diameter with bitumin and G I limpit washer or with GI limpit washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface ) excluding the cost of purlins , rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less then 275gm/sqm.

Providing and fixing 19 Gage 1.02 mm thick plane sheet Eves boarding /weather boarding including carriage all carriage complete

Supplying and fixing rolling shutters of approved make ,made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets ,side guides and arrangements for inside and outside locking with push and pull operations complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and MS top cover of required thickness for rolling shutters 80x0.90mm M.S. laths with 0.90mm thick top cover including ball bearing complete.

M/S JAFFAR KHAN

M/S MOHD BAQIR

ms mohd hassan