Providing & Supplying Of Solide Waste Collection Hand Trolly 35-Nos. For Dhrol Nagarpalika Including One Years Warrantee At, Dhrol, Dist: Jamnagar Under 15(Percentage) Vivekadhin Grant (Year-2024-25)

NAME OF WORK:- PROVIDING & SUPPLYING OF SOLIDE WASTE COLLECTION HAND TROLLY, AS PER

VARIOUS LOCATION, AT. DHROL

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ _______% Above / Below___________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my /our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 3,49,615=00 Put to Tender Rs. 3,49,615=00

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST :- JAMNAGAR

SCHEME : 15% VIVEKADHIN GRANT (YEAR-2024-25)

NAME OF WORK:- PROVIDING & SUPPLYING OF SOLIDE WASTE COLLECTION HAND TROLLY

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Unbranded Nominal Capacity 140 Liters (Two Wheel Type Wheel Barrow)

Segregation CartUnbranded Nominal Capacity 140 Liters (Two Wheel Type

Wheel Barrow) Segregation Cart

Conforming to Indian Standard (IS 2431: 1963: latest for Single wheel type

Wheel barrow, IS 4184: 1967: latest for Two wheels type Wheel barrow) Yes

Product ISI Marked No

Nominal Capacity of Wheel Barrow 140 Liters (Two Wheel Type Wheel

Material used for manufacture SS Sheets (SS sheets shall be not less than

1.29 mm in thickness, and shall conform to IS : 1079)

Type of chassis frame (Single length of steel tube of 25 mm nominal bore),

Any other suitable steel section, such as flat of size 25 X 3 mm, Angle,

Channel section of equivalent strength, suitably bent to form a support for the

wheel and the body.

Rear Wheel Material MS with solid rubber tyre

Front Wheel Material front wheel HDPE tyre

Minimum diameter of the axle / spindle 27 millimeter

Minimum nominal width of tyre 38 millimeter

Minimum diameter of the wheel 303 millimeter

Number of Partitions in bins for segregation

Thickness of each partition 1 millimeter

Provision of Rear side door to unload waste with handle and lock provision Yes

Minimum diameter of front wheel 202 millimeter

Size of Ball Bearing (6205) 25mmX52mmX15mm

Type of bearing / bush As cast (without bush)

Finish of metal parts Two coats of black bituminous paint conforming to IS:

158- latest, Galvanised, Other finish

Finish other than Two coats of black bituminous paint and Galvanised NA 35.00 9989.00 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika