Loading…
Loading…
Tender Value
₹2.9 Cr
EMD Value
₹2.9 L
Closing Date
6 Jul 2026, 6:00 pm3d left
Executive Engineer Panchayat (R&B) Division, Junagadh
Construction of Majevadi to Pipardi Timbo Road (NP) Km.0/0 to 2/550 Ta. Dist.Junagadh (MMGSY SCSP ~ 2025-26)
318532
07/2026-27 Sr.No.21
Open
Civil Works - Roads
Junagadh
8 documents required · 7 mandatory · 1 optional
₹3,600
DD in favour of Executive Engineer, Panchayat R&B Division - Junagadh
₹2.9 L
28 Jun 2026
28 Jun 2026
28 Jun 2026
6 Jul 2026
29 Jun 2026
BILL OF QUANTITIES
Item Description of Item (With brief specification and reference to Quantity Unit Rate In Figures Amount
No. book of Specification)
1 Clearing and grubbing of road land incl.uprooting rank 0.71 One 28455.09
vegetation, grass, bushes, shurbs, saplings and trees girth upto Hect.
300mm removal of stumps of trees cut earlier and disposal of
unserviceable materials © By mechanical means in area of
2 Earthwork for embankment including breaking clods, dressing 10413.00 One 157.91
with all lead and lift (excluding watering and consolidation) (C) Cum
from borrow area within land width from 1 km lead, and
should have CBR not less than 6.00%
3 Box cutting the road surface to proper slope and camber for 1180.00 One 109.41
making a base for road work including removing the excavated Cum
stuff and depositing on the road side slopes as directed upto
4 Earthwork in cutting in all sorts of soil and soft Murrum 1229.00 One 134.12
including conveying and spreading the suff embankment as Cum
and where directed within 200 meters from the end of the
cutting with all required lead and lift.
5 Granular Sub-base with Black trap crushed stone Well Cum. 1762.50 One 1002.82
Graded Material (Table 400.1) By Mix in Place Method Cum
Construction of granular sub-base by providing Black trap
crushed stone well graded material, spreading in uniform
layers with motor grader on prepared surface, mixing by mix in
place method with rotavator at OMC, and compacting with
vibratory roller to achieve the desired density, complete as per
Technical Specification Clause 401. For Grading I Material
6 Water Bound Macadam Grading 1 (By Manual Means) 1089.80 One 1432.28
Providing, laying, spreading and compacting stone aggregates Cum
of 90 to 45mm sizes to water bound macadam specification
including spreading in uniform thickness, hand packing, rolling
with smooth wheel roller 80-100 kN in stages to proper grade
and camber, applying and brooming, stone
screening/bindingmaterials to fill-up the interstices of coarse
aggregate, wateringand compacting to the required density.
7 Water Bound Macadam Grading 2 (By Manual Means) 1291.30 One 1317.54
Providing, laying, spreading and compacting stone aggregates Cum
of 63 to 45mm sizes to water bound macadam specification
including spreading in uniform thickness, hand packing, rolling
with smooth wheel roller 80-100 kN in stages to proper grade
and camber, applying and brooming, stone screening/binding
materials to fill-up the interstices of coarse aggregate, watering
and compacting to the required density .
8 Rolling of earthwork in layers with power roller including 11256.50 One 22.95
filling in depression which occur during the process and Cum
Watering of earthwork as directed.
9 Providing and Laying bitumeneous grout 37.50mm thick using 553.00 One 2284.21
Emulsion RS1 (Bulk) for tack coat at the rate of 4.00 Kg/10 Sqm MT
on WBM surface and using BT chips for required gradation
with the asphalt of grade VG-30 at the rate of 1.99% ie.
Kg/MT by weight of mix including heating and mixing in
drum mix plant, transporting the mix and spreading the same
by paver finisher and consolidation as per MOST specification
including cost of all Materials, fuel, labours, tools and plants
etc. using contractor's own drum mix plant etc. complete.
Item Description of Item (With brief specification and reference to Quantity Unit Rate In Figures Amount
No. book of Specification)
10 Providing, laying and rolling of 25mm thick using asphalt 387.00 One 2920.21
viscosity grade of VG-30 open graded premix bituminous MT
carpet with BT aggregate as specified and using emulsion RS1
(Bulk) for tack coat at the rate of 2.50 Kg/10 Sqm on BT surface
(As per IRC-16) and using bitumen for mixing with aggregate at
the rate of 3.36% i.e. 33.60 Kg/MT of total mix including
heating and mixing in drum mix pant, spreading the same with
paver finisher and consolidation with vibratory roller includng
necessary firewood, oil lubricants, labour charges etc. using
equipment, tool etc. completed in accordance with the
requirement of specification.
11 Providing and laying sealcoat using asphalt viscosity grade of 202.00 One 3153.92
VG-30 with BT aggregate as specified using aggregate at the MT
rate of 0.18 Cum/10 Sqm and bitumen for mixing with
aggregate at the rate of 4.50% i.e. 45.00 Kg/MT of total mix
including heating and mixing in drum mix plant and spreading
the same by paver finisher and consolidation with vibratory
roller including necessary using contractor's own drum mix
plant, machineries and equipment, tools etc. complete in
accordance with the requirement of specification
12 Excavation for foundation upto 1.5 m depth including sorting 205.20 One 253.88
out and stacking of useful materials and disposing of the Cum
excavated stuff upto 50 meter lead. Dense or hard soil.
13 Excavation for foundation upto 1.5m depth including sorting 153.90 One 432.61
out and stacking of useful materials and disposing of the Cum
excavated stuff upto 50 meter lead. Hard Murrum
14 Excavation of foundation in hard murrum and boulders and 538.20 One 611.32
very stiff or sticky clays and other similar strata including Cum
shorting out and struting and dewatering as necessary and
disposing of the excavated stuff as directed.
15 Excavation in large boulders and soft rock by wedging 311.30 One 716.55
including shoring, strutting and dewatering as necessary and Cum
disposing of the excavated stuff as directed,
16 Providing and fixing Mild steel dowel bar of minimum 32mm 30.00 One 450.06
dia. For anchoring by drilling holes in foundation strata Rmt.
including necessary bending, hooking of dowel bars and
grouting the holes complete as per detailed drawing and as
17 Providing and casting in situ ordinary cement concrete M-150 959.80 One 3921.63
mix and providing necessary pin headers including shuttering, Cum
scafilding, laying vibrating, curing and finishing complete
Without V-Grooves.All Height (A) Height From 0.0 M to 5.0 M
18 Providing and filling in foundation with ordinary cement 450.70 One 3345.58
concrete M-100 mix and providing necessary vertical pin Cum
headers incl. Formwork, vibrating, ramming and curing
19 Construction of concrete road using tremix system with 20 cm 560.00 One 6898.81
thick controlled C.C. M-250 concrete mixing conplast P-211 Cum
water reduction admixure @ 100ml/bag of cement and hardner
62.50ml. /bag using fixing and removing "C" channels of
required road depth levelling if placed concrte with surface
vibrator, finishing the surface with power floater and towel
tight brooming as directed with providing expantion joints
20x200mm and contraction joints 20x20mm using concrete
cutter machine etc. complete.
Item Description of Item (With brief specification and reference to Quantity Unit Rate In Figures Amount
No. book of Specification)
20 Providing and casting in situ Contolled Cement concrete M 200 23.30 One 5307.45
mix for R.C.C. works in pier cap, abutment cap, and dirt wall Cum
including controlled cement concrete M 250 bed block or
pedestals for required size below bearings as per detailed
drawings, centering, shuttering, scaffolding wherever necessary
laying, vibrating, curing and finishing complete.
21 Providing and casting in situ Controlled cement concrete M 250 68.30 One 5276.61
for R.C.C. Solid slab including centering, scaffolding, curing Cum
and finishing complete.
22 Providing and casting in situ Contolled cement concrete- M-200 31.80 One 5158.71
for Approach slab including formwork, curing and finishing Cum
23 Providing and casting in situ Controlled cement concrete- M- 3.60 One 4869.01
200 Kerb/Kerb blocks including formwork,curing and Cum
finishing complete.
24 Numbering the CD work with approved paint including all 4.00 One 58.80
materials for painting etc. complete. No.
25 Providing and laying weep hole in Abutment and returns by 263.00 One 61.46
using P.V.C. pipe of 110mm. Incl. fixing in proper grade and No
jointing the complete as per detailed specification
26 Providing and laying filter media 600mm. thick directed at the 155.00 One 1239.35
back of abutments, returns and wing walls as per detailed Sqm
specifications.
27 Providing and fixing in position Mild steel dowel bars in pier 12.00 One 341.28
cap or abutment caps for anchorage in fixed end as per detailed No
drawings including cutting bending and welding complete.
28 Providing and fixing in position Mild steel dowel bars in pier 12.00 One 399.69
cap or abutment caps for anchorage in free end as per detailed No
drawings including cutting bending and welding complete.
29 Providing and laying in Position FE 500D TMT bar 9.910 One 73858.69
reinforcement including cutting, bending, hooking and tying MT
complete as per detailed drawings for the following (A) Piers
(B) Abutments (C) R.C.C. Returns
30 Providing and Fixing in position FE 500D TMT bar 21.750 One 73243.01
reinforcement including cutting, bending, hooking, and tying MT
complete as per detailed drawaing (A)RCC kerb (B) RCC
Footpath (C) RCC Approch Slab (D) Wearing coat.
31 Providing Pre-moulded asphalt filler joints as per drawings. 19.60 One 703.52
32 Providing G.I. 100mm. Diameter water spouts including 8.00 One 536.02
necessary iron gratings as per drawings. No
33 Providing flood gauge marks on sub structure as per design 5.90 One 156.33
including painting complete Sqm.
34 Filling available excavated earth (excluding rock ) in trenches 1898.80 One 136.91
plinth sides of foundation etc. in layers not exceeding 20cm in Cum
depth consolidating each deposited layer by ramming and
35 Supplying and fixing reinforced concrete heavy duty 45.00 One 3469.25
nonpressure pipes with collars for culverts carrying heavy Rmt.
traffic as per IS 458-1991 specifications including setting the
pipes in C.M. 1:2 watering and laying (to level or slopes) of
class NP3 of following internal daimeters.I) 900mm. Dia
36 Dismantling the existing structure including removing and 141.20 One 952.51
stacking the dismantled materials as and where directed. RCC Cum
Item Description of Item (With brief specification and reference to Quantity Unit Rate In Figures Amount
No. book of Specification)
37 Providing temporary all weather and fair weather diversion 181.00 One 1690.23
suitable for traffic during the construction period of the bridge Rmt.
/ slab drain / Causeway / HPD etc. including all safety
measures for traffic etc.
38 Providing parapet of ordinary cement concrete M-200 as per 30.00 One 1086.62
detailed drawing with necessary reinforcement including, Rmt.
shuttering, laying vibrating and finishing to line and level
complete. (ii) Cast in situ
39 Providing and casting -in - situ controlled cement concrete 501.90 One 5227.35
M200 for R.C.C. Return as per drawings including centering Cum
shuttering, scaffolding where necessary, laying vibrating,
curing and finishing complete. A. Height from 0.0 to 5.0M (1)
Piers (2) Abutment (3) RCC return
40 Providing and cast in situ Controlled Cement Concrete M-200 104.30 One 5300.56
for average 75mm thick wearing coat laid as directed incuding. Cum
tamping, vibrating, finishing, curring and filling in joints with
bitumen complete.
41 Providing and fixing Hectometer as per IRC type design incl. 10.00 One 356.49
painting, lettering etc. fixing in C.C. 1:5:10. No
42 Providing and fixing Guard stone as per I.R.C. type design 240.00 One 213.79
including white washing etc. complete. fixing C.C. 1:5:10 No
43 Providing and fixing ordinary Kilometer stone of pre-cast 3.00 One 704.33
C.C. 1:2:4 including necessary reinforcement as per I.R.C. type No
design in C..C. 1:4:8 including painting lettering etc. complete.
44 Providing and fixing Indicator stone of approve stone as per 115.00 One 102.84
I.R.C. type design in C.C. 1:4:8 including white washing etc. No
complete fixing in earth
45 Citizen's Information Board- Providing and fixing of typical 1.00 One 7399.26
MMGSY information board as per instruction. Two M.S. sheets No
of 3 mm thick of 900mm x 750mm size fixed at top & bottom
duly rivetted with MS angles of 25x25x5mm thick M.S. angle
shall be welded by two vertical M.S. angle of 5mm thick to
75mm x 75mm of 12 SWG square tubes posts duly embedded in
cement concrete M-15 grade blocks of 600mm x 600mm x
750mm below ground level. The letters & figure of any shade
reflectorised with high intensity prismatic grade retro reflective
sheeting of Type-4 as per ASTM D-4956 and latest MORD
specifications; All sections of framed posts and steel tube will be
painted with primer and two coats of epoxy paints as per
drawing Clause 1701 and Annexure 1700.1 (10.16). (A) Class-B
high intensity grade retro reflective sheeting.
46 Road marking with hot applied thermoplastic paints with 601.00 One 367.72
reflectorising glass beads on bitumin surface providing and Sqm
laying a hot applied thermoplastic compound 2.5 mm thick
including reflectorising glass beads @ 250gms per sqm area,
thickness of 2.5mm is excluding of surface applied glass beds as
per IRC:35-2015. The finished surface to be level, uniform and
free from streaks and holes. zebra patta/bump patta
lane/center line/ edge line/cut patta. The white color marking
should provide liminance coefficinet on cemend road shalll be
min 130 mcd/m2/lux and Asphalt road shall be min
mcd/m2/lux during the service life during the day time. The
marking should meet the performance criteria for night time
reflectivity, wet reflectivity and skid resistance as mentioned in
the section-15 of IRC 35-2015. Warranty for the Retro reflectivity
should be two years.
Item Description of Item (With brief specification and reference to Quantity Unit Rate In Figures Amount
No. book of Specification)
47 Cat Eye / Road Stud / RPM: Supplying of Molded Twin 376.00 One 326.23
Shanks Raised Pavement Markers made of polycarbonate and No
ABS moulded body and reflective panels with micro rismatic
lens capable of providing total internal reflection of the light
entering the lens face and shall support a load of 13635 kgs.
tested in accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97 DO III Dt 11.06. 1997. the height, width
and length shall not exceed 20 mm, 130 mm and 130 mm and
with minimum reflective area of 13 Sqcm on each side and the
slope to the base shall be 35+/-5 degree. The strength of
detachment of the integrated cylindrical shanks, (of diameter
not less than 19+/-2 mm and height not less than 30+/-2 mm)
from the body is to be a minimum value of 500 Kgf. Fixing will
be by drilling holes on the road for the shanks to go inside,
without nails and using epoxy resin based adhesive as per
manufacturers recommendation and The color of the marker
should be as per the IRC 35-2015 and as directed by Engineer-in-
48 "W": Metal Beam Crash Barrier Providing and erecting a "W" 390.00 One 3723.46
metal beam crash barrier comprising of 3mm thick corrugated Rmt.
sheet metal beam rail, 70cm above road/ground level, fixed on
ISMC series channel vertical post, 150x75x5mm spaced 2m
centre to centre, 1.8m high, 1.1m below ground/road level, all
steel parts and fitments to be galvanised by hot dip process, all
fittings to confirm to IS:1367 and IS 1364, metal beam rail to be
fixed on the vertical post with a spacer of channel section
150x75x5mm, 330mm long complete.
49 Direction sign (Junction board):-Providing and fixing sing 1.00 One 14831.70
boards made out of 2mm aluminium sheet; size 244 x 122cms, No
rectangle as as per the design of IRC-67-1977 pre treated with
phospheting process & acid etching, coated with one coat of
epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be as per IRC-30-
1968, 3.1m long (2 nos) stand post and frame fabricated from
suitable size iron angle of 50 x 50 x 5mm 75x75x6mm as
required; painted with best quality epoxy coatings in black and
white bends, the details of symbol or inscription/numerals for
each board shall be as per the instruction of engineer in charge.
The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x
60cms. for each leg. including excavation curing etc. complete
under the supervision of engineer in charge.(A) Engineer Grade
Item Description of Item (With brief specification and reference to Quantity Unit Rate In Figures Amount
No. book of Specification)
50 Village Name : 6.00 One 5045.36
Providing and Fixing sign boards made out of 2mm aluminum No
sheet : size 90*60 cms. rectangle as per design of IRC-67-1977.
Pretreated with phospheting process and acid etching : coated
with one coat of epoxy primer and two coats of best quality
epoxy paint: reflectorised with retro reflective sheeting as per
latest M.O.S.T specification: 3.1 M. long (2 nos) stand post and
frame fabricated from suitable size iron angle of 50*50*5mm
painted with best quality epoxy coatings in black and white
bends the details of symbole or inscription / numerals for each
board shall be as per the instruction of engineer in charge the
fixing at site shall be in 1:2:4 CC block of size 45*45*60 cms for
each leg: including excvation curing etc. comp.under the
supervision of engineer-in-charge.(B)Engineer grade
51 Hazard Marker sign : 4.00 One 2423.73
Providing and Fixing sign boards made out of 2mm aluminum No
sheet : size 90*30 cms. rectangle as per design / Drawing
attached (IRC). Pretreated with phospheting process and acid
etching : coated with one coat of epoxy primer and two coats of
best quality epoxy paint: reflectorised with retro reflective
sheeting as per latest M.O.S.T specification: 3.1 M. long (2 nos)
stand post and frame fabricated from suitable size iron angle of
35*35*3mm and 50*50*5mm : painted with best quality epoxy
coatings in black and white bends the details of symbole or
inscription / numerals for each board shall be as per the
instruction of engineer in charge the fixing at site shall be in
1:2:4 CC block of size 45*45*60 cms for each leg: including
excvation curing etc. comp.under the supervision of engineer-in-
charge. (B) Engineer grade
52 Sign Board per square Meter :- Providing and fixing sing boards 8.00 One 7615.37
made out of 2mm aluminium sheet; size 1 Meter x 1 Meter as as No
per the design given by engineer in charge pre treated with
phospheting process & acid etching; coated with one coat of
epoxy primer and two coats of best quality epoxy paint;
reflectorised with retro refiective sheeting as per latest M.O.S.T.
Specifications; Letters and numerals should be as per IRC-30-
1968, 3.1m long (2 nos) stand post and frame may be fabricated
either from suitable size iron angle of 35 x 35x 3mm & 50 x 50 x
5mm & 75 x 75 x 6mm as required painted with best quality
epoxy coatings in black and white bends. the details of symbol
or inscription / numerals for each board shall be as per the
instruction of engineer in charge. The fixing at site shall be in
1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including
excavation curing etc. complete under the supervision of
engineer in charge.(A) Engineer Grade (VR)
Two Crore Ninety Three Lakh Seventy Six Thousand Six Hundred Five Rupees And Thirty Nine Paisa
I \ We am \ are willing to carry out the work at ……………………… % above \ below percent ( Should be written in figures
and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as under.
* Estimated Amount * Estimated Amount
Put to tender Rs…………………… Put to tender Rs……………………
Deduct……..……..% Add……..……..%
In words………………….……………… In words………………….………………
Item Description of Item (With brief specification and reference to Quantity Unit Rate In Figures Amount
No. book of Specification)
1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for
which no extra payment shall be made.
2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3.GST and Income tax TDS will be deducted at a source while making payments of bills.
4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix
design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate
mentioned in all the tender.
NOTE : Amount Rs 24269 of Dismentalled materials shall be recovered from 1st R.A. bill of Contractor at once.
Signature of Contractor.
Deputy Executive Engineer Executive Engineer
Panchayat R&B Sub Division Panchayat R&B Division
Junagadh-1 Junagadh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
GR ALL.pdf
07_2026-27 Nivida.pdf
BOQ Majevadi Pipardi Timbo Road NP.pdf
SBD Majevadi Pipardi Timbo Road NP.pdf
Speci. Majevadi Pipardi Timbo Road NP.pdf
Download all tender documents and submit your bid