Revival, Restoration, Preservation and Maintenance of Uma Bhagwati Asthapan, Brari Angan Temple-District Anantnag B.W.O Construction of Yatri Niwas at Uma Bhagwati

Wiring for lighting points/fan points/ exhaust fan points/call bell points with 1.5 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit, with 240V 6A modular switch , modular plate and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable, etc. as required. (Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent make ) incl. cost of conduit.

Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing, etc. as required. (Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent ) excl. cost of conduit

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 6 pin 15/16 A modular socket outlet and 15/16A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or equivalent)

Supplying and fixing of suitable size GI box with modular plate and modular cover in front on surface or in recess, including providing and fixing of 2 no. 3 pin 5/6 A modular socket outlet and 2 no. 5/6A modular switch, connections, etc. as required. (Havells/ SSK/ Anchor/ ABB/Schneider or eq.)

Supplying and fixing of modular sockets/ indicators/switches on existing modular plate and switch box, incl. connections, etc. as required (Havells/ SSK/Anchor/ ABB/ Schneider or eq.)

i.3 pin 5A - 10A socket.

ii. indicator.

Point wiring for 5A -10A socket out lets (computer points) with 2x2.5 sq mm (P+N)FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex/KEI/RR make in recessed or surface conduiting system and earthing the point with 1 x 2.5 sq. mm single core copper wire (loop earthing),(Maximum two points shall be connected on one circuit).(Havells/ Polycab/ Anchor/ Finolex/KEI/RR or equivalent) excl. cost of conduit

Supply, installation, testing and commissioning of 12 Watt LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100lm/w, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. (Havells/ Philips/ Crompton/ Jaguar/Wipro/ eq. make to be approved by EIC).

Supply, installation, testing and commissioning of 200-250 mm sweep shutter type exhaust fans and making of space in walls/ windows as per site and necessary connections. (Havells/ Philips/ Crompton/ Anchor/ eq. make to be approved by EIC).

Wiring for sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, incl. cost of conduits(Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2 x 1.5 sq.mm + 1x 1.5 sq. mm Inverter Lighting Circuit

2 x 2.5 sq.mm + 1x 2.5 sq. mm Normal Lighting Circuit

2 x 6.0 sq.mm + 1x 6.0 sq. mm Lighting Sub main

4 x 10.0 sq.mm + 2x 6.0 sq. mm Heating Sub main

Supply and fixing of 6 way (4 + 18) , Double door surface/ recess mounting , Horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer.

Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T / eq. make to be approved by EIC). suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 32 A DP MCB rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T / eq. make to be approved by EIC).suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A TP&N rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T/ eq. make to be approved by EIC). suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply and fixing of LED ambient strip light 40- 45 Watt. System wattage 6W/M (Philips / Panasonic/ Havells/ Agroculture)

Providing / laying of shock proof rubber mat of 2mtr x1 mtr and 12 mm thick in size.

SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel for electrical Works, made out of CRCA sheet. Other parameters required as per point (a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (> 125). (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type)

250 Amp, 36 KA, FP MCCB (Incoming)

MCB DP 40 Amp (Out going)

MCB TPN 63 Amp (Out going)

ON Load Change Over Switch FP 160 amp. (Front operated)

Aluminium Bus Bar 500 Amp set of 4 strips

Aluminium Bus Bar 300 Amp set of 4 strips

Space for 16 way MCBs

Supplying & laying of 95 sq. mm 3.5 core PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade , including excavation, sand cushioning, protective covering and refilling the trench etc as required. (Armoured cable)

Supply, installation, testing and commissioning of 1625VA Power Inverter (Pure Sine Wave type) having generator compatible & provided and fitted with 2 no. 12V, 180 Ah, tall tubular batteries of Exide make and PVC trolley for resting/ housing of batteries. The job also includes terminal connections of batteries, input/ output leads of required size and length, carriage and applicable taxes.

Supply, installation, testing and commissioning of new generation energy saving and environmental friendly long life L.E.D Flood Lighting luminaries , pressure die cast Aluminum housing with high power LED as light source IP 66 Protection. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to a

Supply, installation, testing and commissioning of 1200 mm sweep ceiling fans of Havells/ Crompton Greaves/Bajaj/ Usha/ eq. make (Sample to be got approved), incl. cost of extension of GI rod (if required) and making of necessary connections.

Supply and fixing of two module stepped electronic fan regulator on the existing modular plate switch box, incl. connections but excluding modular plate etc. as reqd.

Supply, installation, testing and commissioning of 400 mm sweep wall fans of Havells/ Crompton Greaves/Bajaj/ eq. make (Sample to be got approved), incl. making of necessary connections.

Supplying and laying of DWC HDPE (Double Wall Corrugated High Density Polyethylene) pipe, 90 mm dia.(OD – 90 mm & ID – 76 mm) ISI marked along with all accessories like sockets, bends, couplers, etc. with fitting and cutting, jointing, etc. (under ground), including excavation and refilling the trench after laying the pipes.(complete job)

Supplying & fixing of LED Strip with aluminium profile

Providing of ISI marked Dry type Co2 type Fire Extinguishers of 4.5 Kg capacity fitted with High Pressure Hose , Squeeze Grip type control valve with self indicating Pressure Gauge .(Cease fire/ Safex/ Minimax )

Supply and fixing of 25 mm dia./ 25 mm wide Medium grade PVC conduit including its allied accessories like bends and concealed deeps, etc. for laying of wires, recessed in walls and making good the same or fixed with necessary clips and rowel plugs complete.

Supply, installation , testing and commissioning of 3 star rating 1.5 Ton Inverter type split Air Conditioners suitable for operation on AC supply single phase 50Hz 230V with hermetically sealed inverter compressor with air cooled condenser latest R410A/ R-32 refrigerant fan motor, start and run capacitors, relay and over load protector internal unit with one indoor and one outdoor unit. The indoor unit fitted on wall by employing suitable clamps and the outdoor unit will be placed on angle iron stand fitted with nut/bolts outside the room to avoid noise, including standard length of suitable size copper tubing covered with nitrile foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ PVC insulated copper cable and a battery operated wireless remote unit. The job includes repairs to walls wherever the same are cut and the AMC of AC for a period of one and a half year from date of successful commissioning. (Daikin/ Blue Star/ LG/ IFB).

Supply, installation , testing and commissioning of relay type voltage stabilizer suitable for 1.5 Ton AC operating from input voltage 90-260Volt thereby producing output voltage of 230volts +_ 3%. (4 KVA)

Supply and installation of 32A metal clad /modular plug & socket with 32A DP MCB for ACs

Supply, installation , testing and commissioning of 20 KVA, 3-Phase, 415V,LT, Unbalanced AVR of Essentials, KE, ALBA, Chinar make, operating from input voltage of L-L=155-460V & L-N=90- 265V, thereby producing the output voltage of 415V +_2% Phase to Phase and 230V +_2% Phase to Neutral. The AVR should have inbuilt Over voltage protection, Under voltage protection & Over loading with TDR. The stabilizer shall be servo controlled automatic, ONAN cooled and provided with first filling of fresh filtered transformer oil having required di-electric strength. The stabilizer shall be capable of smooth operation up to 10% un-balanced in the load currents complete with servo bye pass system consisting of 100A four pole manual type change over switch. The supplier has to give guarantee for any manufacturing defect with three servicing of the equipment for two years reckoned from commissioning. The job also includes all applicable taxes, carriages , loading and unloading.

Supplying & laying of 50 sq. mm 3.5 core PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade for servo input / out put, incl. Cost of aluminium thimbles duly crimped. (Armoured cable)

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the plate with main control board by 25 x 3 mm GI strip with 1/2” dia. Full thread nut and bolts and washers, refilling the pit with chemical compound.