PROVN OF BATHROOM NEAR BLDG NO P45 P10A and SPECIAL REPAIR TO SEWAGE LINE NEAR BLDG NO P26 B01 P48 P60 P201 P204 410 HQ COY ASC PET AND OTHER SANCTIONED WORK UNDER AOR OF AGE BRI of GE A Central Jodhpur

Amount

Dismantling of posts or struts ( wood ,steel or RCC) any section ,including taking out embedded in concrete portion and making good disturbed ground

'Excavation in post holes(or similar holes) each n.exc 0.5 cum, getting out, returning filling in ramming earth arround layers n.exc 25 cm watering & removing surplus soil to a distance n.exc 50 mm & making good surfaces in loose /soft soil.

S/F MS 65 x65x 6 mm angle iron as in fencing post including fabrication for hole for fixing the nut and arrengement for fixing barbed wire. ( Ref TD Drg NO: CEBZ /TD/76-09 sheet no 1/2)

S/F MS 45 x 5 mm thick flat iron securing bolts posts and struts in fencing incl holes(for securing wire mesh etc) incl drilling bolting or revating complete all as specified and directed.

S/F mild steel bolts(machine made) with hexagonal or square heads at one ends each screw end to be filled with washers and one hexagonal nuts of 16 to 20 mm dia of shunk.

M/L cement concrete type C2(1:3:6) using 40 mm graded stone agg foundation filling as fixing of RCC fencing post incl form work if necessary all as specified & directed incl lean conc of gate pillars.

S&F MS mild steel 10 mm dia round bar cut to length incl straining & welding in horizontal bar for securing chain link fencing all as specified and directed.

Dismantling of old barbed wire complete.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing & straining & fixing to any type of strandard rails straining bolts incl securing or tying at crossing with & provision of galvanised mild etc.

M&L M/S Surface of any description , over 10 cm width or girth applying two coat of synthetic enamelpaint over a coat of red oxide primer including prepration.

Dismantling of old chanin link fencing complete

'S&F chain link fencing of 100x100x5.5 mm dia

M&L removig excavated material n exc 50 m and depositing where direced at alevel n exc 1.5 m above the starting point.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm

Removing excavated at a level n.exc 1.5 m above the starting point

M&L for PCC (1:4:8) type D-2 as in foundation filling or mass concrete

Sand filling under floors or in foundations including watering and consolidation

M&L50 mm Thick PCC 1:5:10 Type E-2 as sub base .

M&L for squarred rubble walling Jodhpur type regular coursed, well bonded, bedded and solidly hearted built in CM 1:6

Extra over for hammer dressing to face stone with max depression on face from a streight edge not exc squarred rubble dressing face beds and joints as specified to squarred rubble

M&L PCC solid building blocks 10 Cm thick type B1 1:2:4 set in cement mortar (1:4)

M&L for roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3 Cm in length

M&L for 5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4 complete.

M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick , 25cm to 35cm wide ,hoisted and set jointed and grouted in cm 1:3

M&L for PCC 1 : 2 : 4 Type B0 using 12.5 mm graded stone aggregate as in roof levelling course including weathering , slightly rounded or chamfered angle and throating as directed etc.

M/L Vitrous china wash basin white flat back size 450x300mm including , waste pipe, MS brackets,pillor tap complete all as specified.

M&l for non skid coloured ceramic tiles 300x300mmx7mm thick in floors set and jointed in neat cement slurry and bedding layer of mortar in 1:6 Over 25mm thick PCC 1:2:4 type B-1

M&L for glazed colour ceramic tiles of size 250x350x7mm/250x375x7mm laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles,

M&L for keyed pointing squared rubble coursed masonry in cm 1:6

M&L 10mm thick rendering in CM 1:3 over stone masonery surface including finishing the surface fair and rough to receive tiling.

M&L for 15mm thick rendering in cm 1:6 on stone masonry ffinished even and smooth

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete

S&F 15mm Dia tubes medium grade galvanised, with all fittings and complete to walls and ceiling or laid in floors

All as per item No 20 but 20mm dia complete

All as per item no 20 but 25mm dia complete.

S&F 15mm bore stop valves cast copper alloy, screwed high pressure with crutch or butterly handle screwed both ends iron pipe & fixed

All as per item no 29 but 25mm dia

S&F 15mm bore bib taps , cast copper alloy with crutch or butter fly handle screed for iron pipe and fixed

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 110mm complete

All as per item No 32 above but fixed in wall

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75mm complete

All as per item No 34 above but fixed in wall

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm

S&F PVC (SWR) bends any radius 110mm

All as per item No 94 above but 75mm dia with oval acess door

S&F PVC SWR vent cowl 110mm

M&L (SWR) guly trap 125/110mm setting and jointing with solvent cement

M&L for 110mm dia PVC (SWR) cowl.

S&F 500 litre cap rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms

S&F steel ventilator with top hung shutter including hinges steel peg stay complete

S&F 4mm thick figured glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqmm each

S&F framed work as in gril guard bars and welded to window frames all as specified

S/F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

M&L for solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube all as specified

S&F 100mm long MS butt hinges exuded aluminium alloy with galvanised mild steel pin , anodised and fixed type C-21 .

S&F 150 mm long aluminium anodised tower bolt

S&F 150mm long aluminum anodised handle fabricated type

Supply only 10 litres, pvc valveless syphonic action type, flushing cistern high level with inlet ball valve, float, chain and pull and brackets

S/F of vitreous china orrisa pattern size 580x440mm white with integral foor rest incl P or S trap, flush pipe etc.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

M&L for 15mm dia CP fancy type stop valves, cast copper alloy screwed pressure, screwed both ends for iron pipe for unions and fixed

M&L for 3 coats of white wash on walls including preparation to newly plastered surfaces of walls

M&L for 2 coats of colour wash over one coat of white wash on walls including preparation to newly plastered surfaces of walls

All as per item No 53 but on ceilling

M&L PCC (1:2:4)for water tank plinth all as specified 50 mm thick

M&L Salt-glazed stoneware drai pipes 150mm dia laid in trenches and jointed as spacified and directed.

M&L for concrete bed to drain pipes 150mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested; in Cement concrete 1:3:6 type C-2

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover.

S&F Vitrous china (White) flat back urinal of size 465x355x265mm with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, , flush pipe, union for discharge pipe as in repair complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required

PCC 1:3:6 type 40 mm graded aggregate as in surface channel and drain

M&L Extra for forming fair finished drain or channel30cm inner girth in cement concrete using extra cement ,including forms, moulds,mitred stopped end etc.

M&L for PCC 1 : 2 : 4 Type B0 using 20 mm graded stone aggregate as in levelling course to the roof surface complete all as directed by Enginer-in-Charge.

M&L for carrying out water proofing treatment for roofs in the following stages. (i) M&L for rendering 10mm thick in 1:4 mixed with integral water proofing compound all as per mfr inst over conc surfaces finished even and smooth w/o using extra cement. (II) First coat of bitumen primer confirming to IS 3384 @0.40 Kg/Sqm over plastered surafces (III) Second coat of binding material using blown type bitumen confirming to IS -702 Grade 85/[email protected] kg per Sqm. (IV) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE , other film 20 micron each thickness 2 mm having weight 2.25 Kg/sqm. (V) Final coat of binding material using blown type bitumen confirming to IS 702 of Grade 85/25@ 1.2 Kg/Sqm. (vi) Material and labour for 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate padding over roof laid in slope grooves 6 mm wide and 10 mm deep at 1.2 m interval in both ways or part thereof and filled with mastic bitumen (1:1) proportion complete all as specified and as directed.

Supply only Integral water proofing compund

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in hard dence soil.

All same as item No. 01 above but exc 1.5 mtr and n.exc 3.0 mtr deep.

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out Soft soil.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 150mm bore of pipe.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 200mm bore of pipe.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 250mm bore of pipe.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for remaval of debirs to a distance n exc 50mtrs and depositing where directed complete all as specified and as directed by Engr-in-Charge.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channel or benching including finishing the top of benching even and smooth using extra cement (Forming fair finished channel shall be measured separately).

Material an labour for RCC pipe NP-2 150mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested completed all as directed.

Material an labour for RCC pipe NP-2 200mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested completed all as directed.

Material an labour for RCC pipe NP-2 250 mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested completed all as directed.

Material and labour cement concrete (1:4:8) type D-2 bed to drain pipe including packing under and haunching against the sides of pipes for pipe after they are laid complete all as specified.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling in mass conc.

Demolition of stone masonry built in cement mortar all as specified and directed by Engr-in-Charge.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 all as specified and directed

All as per item No 15 above but except stone in CM 1:6

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surface (externally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement.

Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone agg as in coping of manhole including necessary form work complete all as directed.

Supply only waterproofing compound.

Returning , filling in soft/disintegrated Rock (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick all as directed.

Removing surplus excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point all as directed.

Supply and Fix cast iron foot steps, n. exc 5 Kg each in manholes.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover.

S&F machine made precast cement concrete blocks (interlocking paves) colour rubberised 60mm thick with 6mm top layers of ante abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2.

Cutting in to existing manhole for connecting new drains and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finish and reforming benching as asked. (a ) 150 mm dia

Ditto as per Srl item No. 105 but 200 mm dia.

Dismantling wrought iron or mild steel work of any description .

S & F for mild steel work in tubuler posts , rafter, purline etc. including special shaped washer etc. complete using ERW or including butt welded tubes conforming to IS-1161-1976 grade st -240 complete all as specified and directed.

Dismantling of sand cast,cast iron or RCC drain pipe jointed in cement mortar of size 100mm bore as directed

S&F sand cast,Cast Iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors 100mm complete all as specified and directed.

S&F CI bends any radius 100mm all as specified and directed.

M&L (SWR) guly trap 125/110mm setting and jointing with solvent cement

M &L for cutting to Bituminious road for laying of RCC hume pipe & making good as per road specification as per direction of Engr-in-Charge.

Cutting and grubbing of bushes grass and tree surrounding sewage line and levelling of ground around the sewage line, finish the surface and removing the waste material to distance exc. 50m and n exc. 250m and clearing the site.

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch.

(c) One socket outlet 3 pin 6 Amps on same board

(d) One socket outlet 3 pin 6 Amp on independent board

All as per item No 2 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket out let , 5 pin , 6 Amp piano type.

S&F socket out let , 3 pin ,16 Amp piano type.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

S&F LED tube light fitting three colour, 20 watt,4000 lumens, complete with all accessories etc internally pre-wired , including LED lamp-1No made of connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable Make of branded:Syska/Phillips/Havells complete all as specified.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 7 watt LED Lamps ISI Marked.

S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS SPN 8 way,-Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB SPN 63 Amp, 10 kA, ISI Marked.

Supply and fixing 10 sq mm1100 volts grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC sheathed in service connetion complete all as specified and directed.

M&L sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 20 mm. dia medium duty PVC concealed conduit and conduit accessories and fittings. Including one single core green colour PVC. Insulated unsheathed cable copper conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed including taking down old one. The make of conduit & its acccessories should be precision/Polycab/AKG. The make of cable should be of Finolex/Polycab/Havells/L&T

m/s Firoz khan

M/S KAUTILYA GARG

SHRI BHIKSHU ART AND CONSTRUCTION CO

mahalaxmi enterprises