SPECIAL REPAIRS TO DAD QTRS (BLOCK V AND VI) AT PAYYAMBALAM UNDER AGE (I) CANNANORE

Amount

Dismantling of MP roofing tiles or similar tiles in roofing complete all as specified and as directed.

Dismantling battens spaced exceeding 15 cm for tiles, shingles etc of any size including tilting fillets complete all as specified and directed.

Dismantling of timber scantlings 40 sqcm and over in section in any position, unframed work complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards, slabs, blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L Second class hardwood scantlings, clean sawn, framed and fitted as in rafters, purlins etc; complete all as specified and as directed.

All as in item No. 5 hereinbefore but for except timber complete all as specified and as directed.

M&L Structural steel work of rectangular or square tubular section as in purlins/battens including special shaped washers etc. steel confirming to Fe-410-W (Gde-E-250) quality B complete all as directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm (total coated) thick of any colour, having tensile strength of 550 Mpa as in roofing, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm (total coated) thick of any colour, having tensile strength of 550 Mpa as in roof covering/ Ridge/ Valley gutter/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F180 mm bore PVC (SWR) pipe as in half round gutters including drop ends/stop end suitable for 180 mm half round valley gutter and fixing with MS/PVC clamps suitable for steel sheet roof complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) down take pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

M&L Preparing new steel and iron surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

M&L GI framework for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre suspended with hangers 6 mm dia (up to 1200 mm length) GI wire of suitable length adjusting level fixed to roof by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long complete all as specified and directed

S&F 4 mm thick non asbestos fiber cement building boards fixed to GI frame work with screws in joint less finish with joining compound and joining tape as per manufacturers instructions for ceilings flat or sloping complete all as specified and as directed.

M&L Preparation of new plastered or unplastered ceiling surface and applying two coats of distemper oil emulsion over two coats of putty for smoothness and chalk whitening primer complete all as specified and as directed.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and Brushing neat cement slurry with 3 kg cement per Sqm complete all as specified and as directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry pointed in white or coloured cement to match over and including 20mm thick screed bed in Cement Mortar 1:6 as in floors etc. complete all as specified and as directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry pointed in white or coloured cement to match over and including 20mm thick screed bed in Cement Mortar 1:6 as in floors etc. complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings etc including raking out jointing, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering in CM 1:6, 10mm thick on stone masonry surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L Glazed coloured ceramic tiles 300x200x7mm thick on and including 10mm thick backing coat in Cement Mortar 1:6 on vertical surfaces of wall such as skirting dado etc. complete all as specified and as directed.

M&L rendering in CM 1:4, 15 mm thick on stone masonry surface finished even and smooth without using extra cement complete all as specified and as directed.

Taking down chowkat or frames exceeding 1.5sqm but not exceeding 4sqm each with shutters of any description (without taking off shutters from frame) complete all as specified and directed.

Taking down chowkat or frames not exceeding 1.5 sqm each with shutters of any description (without taking off shutters from frame) complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm easing and adjusting and refixing/renewal of builders hardware including renewal of screws and refixing the shutter in same opening complete all as specified and as directed. Note:- Renewal of builders hardware are measured and paid separately as supplied only.

Supply only 100mm size mild steel butt hinges, medium weight all as specified and directed.

M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, treating ends of posts, backs of chowkats, etc., area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area not exceeding 0.1 sqm each, and treated with tar or coal tar black paint complete all as specified and as directed.

M&L Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

M&L Preparation of old treated wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F Second class hardwood for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc. complete all as specified and directed.

M&L 35mm thick, Second class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats complete all as specified and directed.

M&L 35mm thick, Second class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauge (with sash bars) edges of framing plain chamfered or round fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F 3mm thick, Figured/froasted glass in squares not exceeding 0.5sqm each pane and securing with wooden beads complete all as specified and as directed.

S&F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Powder coated anodised sliding/side hung type aluminium window and ventilator shutters (as directed) without sash bars, aluminium section weighing exceeding 0.55kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, suitable handle, side lock for shutter, anodised aluminium snap beading, screws etc complete all as specified and as directed.

S&F 6mm thick Powder coated anodised aluminium decogrill 50mmx50mm mesh (weight not less than 2.54kg/sqm) fixed to window frame complete all as specified and as directed.

M&L 4mm thick, plain sheet glass in square not exceeding 0.5 sqm in each pane, ordinary quality and glazing with oil putty complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed as in repairs complete all as specified and as directed.

S&F flat iron as in hold fast and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L Cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate as in PCC block for fixing hold fast including necessary form work etc complete all as specified and as directed.

S&F Solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 300mm long aluminum alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section or cast aluminum alloy; complete all as specified and as directed.

S&F 100mm size, Stainless steel Butt hinges, medium weight, complete all as specified and as directed.

S&F 150mm size, extruded aluminum anodized alloy handle, fabricated type complete all as specified and as directed.

S&F Floor door stopper aluminium alloy body and tongue, anodised, with hard drawn steel spring (overall length of cover plate 140mm), fixed in floor complete all as specified and as directed.

S&F 125mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Demolition of brick work or concrete/ stone masonry wall built in cement mortar complete all as specified and as directed.

M&L Walling of laterite stone walls uncoursed, well bonded bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed.

All as per item No 51 hereinbefore, but except stone (stone obtained from demolition under item No 44 above) complete all as specified and as directed.

Demolition of concrete in ground floor and pavings not exceeding 15 cm thickness (below or above GL) for cement concrete un-reinforced complete all as specified and as directed.

Surface excavation n exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

M&L Hardcore with broken stone or boulder of gauge not exceeding 63mm deposited spread and leveled in layers not exceeding 15cm thick watered and rammed to true surface complete all as specified and as directed.

M&L 75mm thick, cement concrete 1:3:6, type C2, using 40mm graded stone aggregate, finished even and smooth with out using extra cement as in plinth protection complete all as specified and as directed.

Taking down 15 mm bore GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

All as per Item No 57 here in before but 20 mm bore complete all as specified and as directed.

M&L 15mm bore unplasticized PVC pipe of pressure rating 10kgf/cm2 fixed on walls ceilings or on floor complete all as specified and as directed.

All as per Item No 59 here in before but 20 mm bore complete all as specified and as directed.

S&F 75mm bore PVC(SWR) pipes, single socketed in any length with rubber ring joints, laid in floors or trenches complete all as specified and as directed.

All as per item no 61 here in before but fixed to walls complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bends with access door for UPVC type 'B" pipe complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified.

Demolition of Reinforced cement concrete of any description and in any position complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 (nominal mix) type B1, using 20mm graded stone aggregate as in slabs complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 (nominal mix) type B1, using 20mm graded stone aggregate as in Beams complete all as specified and as directed.

M&L Form work to soffits of suspended slabs such as roof slabs and similar work not exceeding 200mm thick finished rough in flat complete all as specified and as directed.

M&L Form work to edges of concrete flats, floor and roofs not exceeding 20 cm wide and similar work exceeding 10cm but not exceeding 20cm wide finished rough complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as in item 70 above, but 6 to 8mm dia bars in stirrups, spacers and binders complete all as specified and as directed.

M&L 20mm thick granite (of any type) work, table rubbed and polished, laid in cement mortar 1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm screed bed in cement motor 1:6 as in cooking platform complete all as specified and as directed.

Dismantling of existing roof treatment consisting of screed plaster, tar felt, HP tiles etc, wire brushing and cleaning and removal of dismantled materials complete all as specified and as directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3. complete all as specified and as directed.

M&L brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.

M&L 25mm thickness (Average) Cement concrete1:2:4, type B-0, using 12.5mm graded stone aggregate mixed with waterproofing compound @ 3kg/bag of cement or as per manufacturer's instructions for padding concrete to achieve required slope and thickness over roof/chajja, finished even and smooth without using extra cement complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid separately

Supply only Integral waterproofing compound complete all as specified and as directed.

M&L Applying bitumen based primer @ 0.2 kg/sqm, providing 4mm thick APP modified water proofing membrane weighing not less than 4kg/sqm, reinforced with non woven polyester matt (weighing not less than 160gms/sqm) having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 800N/sqcm tearing strength of 180 Nm, and laying by torch application including minimum 10cm side overlap and 15 cm end lap and applying solar reflective bituminous aluminium paint @100gms/sqm complete all as specified and as directed.

M&L Providing polymer modified mortar using cement motor 1:3 mixed with Nitobond of FOSROC or equivalent cement modifier cum bonding agent @ 5 ltr per bag of cement or using SBR liquid 5% by weight of cement or as per manufactures instructions. The repair shall be carried out in already prepared surface (i.e., chipping and reinforcement priming) where the application of Renderoc RG of FOSROC or equivalent fluid micro concreting is not possible. The prepared mortar shall be applied for an average thickness of 30 mm after and including application of Nitobond EP of FOSROC or equivalent, complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250 but not exceeding 500 litres, of any description and removing to store complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres (ISI Marked) hoisted and fixed in position all as specified in SSR Part I. complete all as specified and as directed.

S&F Ball brass valves, 25mm bore high pressure, with polythene float and fly nut, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M&L prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side with balancing white lamination fixed with screws as in shutters /shelves including necessary framework, with 2 No of SS hinges,1 No SS handle 75mm and ball catch magnet spring in each door shutter fixed complete all as specified and directed.

S&F Shower rose brass chromium plated with swivel joints, 125 mm size, fancy type, fixing to steel pipe or union complete all as specified and as directed.

S&F PTMT Shower arm 15 mm bore, 195 mm long with bend of 45 degree with flange, any colour complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

S&F Sinks made of stainless steel l.0mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F Vitreous China wash hand basin size 580 x 450mm white with brackets and flat back including cutting for pinning in ends of brackets including taking out the existing unserviceable WHB as in repairs complete all as specified and as directed.

S&F Vitreous china wash down water closet pan (Pedestal pattern) white (Excluding fixing bolts, flushing cistern and flush pipe as fixed as in repairs complete all as specified and as directed.

S&F 32 mm bore waste fittings brass chromium plated for wash hand basin with long screwed shanks and fly nuts flange end bedded in red lead cement and other end in repairs complete all as specified and as directed.

S&F Pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore as in repairs complete all as specified and as directed.

S&F Stop valves, cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore as in repairs complete all as specified and directed.

S&F PVC valve less, syphonic action type, flushing cistern of 10 litres, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm bore of polyethylene of low or high density as in repairs complete all as specified and as directed.

S&F PVC connections 15mm size, 600mm long with PTMT nuts for flush tank as in repairs complete all as specified and as directed.

S&F Bib taps 15 mm dia cast copper alloy chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F 75 mm dia, PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) `P` trap of 125 / 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) gulley trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.

M&L Reinforced cement concrete 1:1.5:3, type A1 using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors like complete all as specified and directed.

M&L Reinforced cement concrete 1:1.5:3, type A1 using 20 mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

S&F in repairs Health Faucet, brass, Chromium plated, jet spray including LDPE flexible cable with jet of 100mm long fixed to 15mm bore iron pipe all as specified and as directed.

S&F in repairs stainless steel drapery rod 25mm dia including side caps with brackets fixed to wall with suitable brass screws all as specified and as directed.

M&L 40 mm thick, plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in flooring complete all as specified and as directed.

M&L Plain cement concrete 1:3:6, type C1 using 20 mm graded stone aggregate as in coping/manhole base and the like of any description including necessary form work etc complete all as specified and as directed.

Removing building materials etc., to a distance of 5.0 Km beyond the lead included in other rates including loading, unloading and stacking at destination where directed complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for manholes, sewage lines etc. in hard/dense soil complete all as specified and as directed.

Dismantling and breaking up drain pipes any dia (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

S&F PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints or jointed with solvent cement laid in trenches or in floors complete as specified and directed.

M&L concrete bed in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L Complete removal of existing treatment on surfaces of wall and applying one coat of wall primer (water thinnable/solvent thinnable),two coats of acrylic wall putty for making the surface smooth and even including sanding each layer to receive next new layer, one coat of wall primer and applying two coats of oil emulsion distemper to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved complete all as specified and as directed.

M&L Complete removal of existing treatment on external walls by scrapping down old treatment and applying two coats of exterior grade anti-algal acrylic emulsion paint over one coat of wall primer paint including preparation of surfaces using wall care putty etc complete all as directed and as per manufacturers instructions.

M&L Preparation of newly plastered surfaces of external walls and applying two coats of exterior grade anti -algae acrylic emulsion paint over one coat of wall primer paint over wall care putty etc complete all as directed as per manufacturers instructions complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls, preparing surface even and smooth using wall care putty and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as approved

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soils complete all as specified and as directed.

Removing surplus excavated material (Soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L Complete removal of existing treatment on surfaces of external wall by scrapping down old treatment and applying two coats cement based paint over one coat of alkali primer paint complete all as directed as per manufacturers instructions.

Taking down carefully copper/aluminium point wiring of light, fan, socket or power complete, including fitting such as switches, ceiling roses, pendants, regulators, scokets etc. and making good disturbed surfaces of walls, floor ceiling etc. complete all as specified and as directed.

M&L Point wiring complete with 1.5 Sqmm single core, PVC insulated unsheathed copper conductor FRLS cable, multi-stranded 1100 V grade drawn through and including non-metallic rigid PVC conduct, concealed in wall complete, fixed in roof, etc with necessary fixing accessories such as bend, elbow, socket, saddles etc with and including 1.5 sqmm, single core PVC insulated unsheathed copper conductor FRLS cables multi stranded, 1100 volt grade green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed for:-

One light point controlled by one switch complete all as specified and as directed.

One ceiling fan / exhaust point controlled by one switch complete all as specified and as directed.

One 3 pin, 5 Amps switch socket combination on independent board complete all as specified and as directed.

One 3 pin, 5 Amps switch socket combination on same board with other switches complete all as specified and as directed.

All as per Srl item No 109 above, but for one 3 pin, 15 Amps, switch socket combination on independent board with FRLS cable of size 4 Sqmm with and including 2.5 Sqmm copper conductor cable as earth continuity conductor green in colour and connected to common earth dolly complete all as specified and as directed.

Cutting chases on wall of width 30mm, depth 35mm for concealing PVC conduct of 20/25mm dia, with and including replastering, smooth finishing to match the existing colour of the wall complete all as specified and as directed.

Cutting chases on wall of width 50 mm, depth 35mm for concealing PVC conduit of 20/25 mm dia, with and including replastering, smooth finishing to match the existing colour of the wall complete all as specified and as directed.

Cutting chases on wall of width 75mm, depth 35 mm for concealing PVC conduct of 20/25mm dia, with and including replastering, smooth finishing to match the existing colour of the wall complete all as specified and as directed.

S&F Modular switch, 240 V, one way, single pole, 6 Amps one module including connecting up electrically complete all as specified and as directed.

S&F Modular switch, 240 V, one way, single pole, 16 Amps one module including connecting up electrically complete all as specified and as directed.

S&F Switch, bell push modular type, 240 V, 6 Amps one module including connecting up electrically complete all as specified and as directed.

S&F Ceiling rose of polycarbonate, 3 terminal including connecting up electrically complete all as specified and as directed.

S&F Socket outlet, 2/3 pin 6 Amps, multipurpose, modular type, including connecting up electrically complete all as specified and directed.

S&F Socket outlet, modular type, 2 in 1, 2/3 pin, 6 & 16 Amps, including connecting up complete all as specified and as directed.

S&F Calling bell, AC, 240V, single pole including connecting up electrically complete all as specified and as directed.

S&F Modular white cover plate with frame for two module complete all as specified and as directed.

S&F Modular white cover plate with frame for three module complete all as specified and as directed.

S&F Modular white cover plate with frame for four module complete all as specified and as directed.

S&F Modular white cover plate with frame for six module complete all as specified and as directed.

S&F Modular white cover plate with frame for eight module complete all as specified and as directed.

S&F Modular metal flush box for one/two module complete all as specified and as directed.

S&F Modular metal flush box for three module complete all as specified and as directed.

S&F Modular metal flush box for four module complete all as specified and as directed.

S&F Modular metal flush box for six module complete all as specified and as directed.

S&F Modular metal flush box for eight module complete all as specified and as directed.

S&F Sheet metal enclosures distribution boards, double door 4 way three phase 415 volts MCCB, ISOLATOR & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following:- (a) MCCB 4 Pole 100 AMPS AC 415 V 10 KA=01 NO as incoming & outgoing MCB SP-12 No 40 AMP Note :- (i) The DB shall be VTPN series of Make: Hagger CAT PART No VYV04DMZ or techno commercially equivalent. (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii) Connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

S&F Sheet metal enclosure factory made for MCB DB, SP, 8 way with 200 Amps bus bar 415 Volt, double door type, fixed/flushed on wall including electrically connecting up complete all as specified and directed.

S&F MCB SP, 240 Volt, 6 to 32 Amps including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F MCB SPN, 240 Volt, 40 Amps including electrically connecting up using wiring lugs complete all as specified and as directed.

S&F Decorative ultra slim linear LED light fittings with extruded AI, heat sink, environmental friendly, energy efficient ready to use pack of E-LITE LED of 20 W LED 6500K, including taking down unserviceable fluorescent tube light fittings complete all as specified and as directed., Model: LHEXBYPNINIW020 of Havells or techno commercially equivalent

S&F decorative ultra slim linear LED light fittings with extruded Aluminium, heat sink, environmental friendly, energy efficient ready to use pack of E-LITE LED OF 10W LED 6500K, including taking down unserviceable fluorescent tube light fittings complete all as specified and as directed., Model: LHEXBYPNIN1W010 of Havells or techno commercially equivalent complete all as specified and as directed.

S&F Bldg LED security light fitting 30 watt s of Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection including GI bracket, clamps of suitable size for fixing of light fitting including taking down old unserviceable bulk heading fitting from wall complete all as specified and as directed. Make: Havells Cat Part SL30WLED757SASYBOPC or techno commercially equivalent

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron connected to earthing test point, main DB, panel board, continuous earth lead protected by 15mm bore GI pipe light grade, 20mm bore GI light grade pipe for watering, necessary excavation and earth work in any type of soil, PCC pit, RCC chamber cover with suitable reinforcement complete all as shown on electrical plate No 3 of SSR part-I of 2009 all as specified and directed. Note :- Rate quoted shall deem to include for GI earth and GI pipe lead upto 7.5m length.

S&F LED Ball type Lamp 10 watt as in repairs complete all as specified and as directed.

M&L Sub main wiring with two runs of single core 4 Sqmm copper conductor FRLS cable, PVC insulated, unsheathed multistanded, 1100 V grade drawn through and including non metallic rigid PVC all accessories such as bend, elbow, socket, tee saddles etc fixed concealed to wall / fixed to ceiling etc including 2.5 Sq mm single core copper conductor FRLS cable PVC insulated, unsheathed multistranded 1100 V grade as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note :- 2 runs of 4 Sq mm and one run of 2.5 Sq mm copper cable and one run of PVC conduit will be measured as one length.

S&F Ceiling fan regulator, electronic stepped type, modular type, two module 120 w suitable for ceiling fan 230 v,1200 sweep BEE, 5 star rated complete all as specified and as directed.

Taking down carefully ceiling fan/Exhaust fan with rod from ceiling / roof/ wall and refixing the same after repairs such as servicing, greasing, replacement of ceiling fan down rod of suitable length, clamps, nuts, washers, rubber bushes, safety pin etc as required and applying one coat of white synthetic enamel paint and writing of MES No complete including connecting up with 2 core twisted flexible copper conductor 23/0.0076 from ceiling rose to fan, test and commissioning all as specified and directed. Note : Rewinding and replacement of capacitor & bearing shall be measured and paid separately.

Rewinding of ceiling fan 1200 mm sweep / Exhaust fan any type and make, cutting and removing burnt winding wire without damaging stator, removing old insulation of polyester paper, re-winding fan motor with super enameled copper wire of same gauge/dia with correct number of turns for auxiliary and main winding, varnishing, baking, soldering new lead of twin core multi-stranded copper conductor cable of size 23/0.0076, assembling, re-fixing including two coats of painting, testing and commissioning complete all as specified and directed.

Supply only ball bearing of suitable for ceiling fan 1200mm sweep including removing old un-serviceable bearing and testing complete all as specified and directed.

S&F fan capacitor suitable for ceiling fan complete all as specified and as directed.

S&F exhaust fan, plastic body suitable for 250 mm dia sweep complete with fixing accessories including making hole as per site requirement for suitable size as in repairs complete all as specified and directed .Make: Cat Part No FHVVEDXOWH08 of Havells/CG/Bajaj or techno commercially equivalent

Supply, fixing and testing AC. Single Phase, 2 wire Electronic energy meter in poly carbonate body with Counter type Display of KWH Energy meter of Rating 5-30A,,Class1.0,240v, 50Hz, with Transparent Hinge type Box fixed on wall including electrical connections from Distribution board to Meter complete all as specified.

T.P.SUNIL KUMAR

RS ENTERPRISES