REPAIR MAINTENANCE TO SIGN BOARD PCC HARDSTANDING PATH MS WORK MISC B and R CONNECTED WK AT 217 TRANSIT CAMP PALCHAN

Amount

Demolition of PCC in ground floors and pavings n exc 15cm thickness including below or above ground level complete all as specified and as directed by Engineer-in-Charge.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in subbase of floor complete all as specified and as directed by Engineer-in-Charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

M&L for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block with Gery cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed by Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick on brickwork or concrete surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engineer-in-Charge. Make:- Acrocem/Snowcem and equivalent.

M&L for Pre-cast cement concrete block 1:3:6 type C-1 (using 20mm graded stone aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.

M&L for providing cement conc 1:2:4 type B0 as in mud stops rounded or chemfered complete all as specified and as directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel in Joist, channel, angle, or tee sections, Hollow or round steel tubes, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410 -W (GdeE- 250) quality-A, complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel Windows Chajja / wind ties for roof covering including screwing bolts, etc complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted gaivatume aluminium sheet zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted gaivatume aluminium sheet zinc coatin GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W, Gde E-250, complete all as specified and as directed by Engineer-in-Charge.

S&F plain, black, mild steel sheeting, 1.25mm thick, in ridges, doors, hips, valley gutters, drip and straight flashings (length and girth as fixed), with welded or soldered provided complete all as specified and as directed by Engineer-in-Charge.

Manufacturing, supplying and fixing Retro reflective regulatory sign board of size n exc 1.80 Sqm made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective heeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete all as specified and as directed by Engineer-in-Charge.

NATHU RAM AND SONS

JANDIAL ENTERPRISES

M/S SUKHMANI ENGINEERS

M/S RUDHRAKSH TRADING CO

Kalap Engineers and Builders

M/S. Vyas Vatika Constructions co.

M/s SODHI SALES CORPORATION