15th Finance Commission Funds Grant

Refilling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20 B(APSS 308) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supplying, fitting and placing HYSD /TMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded (APSS no 126) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Filling with Selected earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Plinthbeams Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Columns Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Roofbeams Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Roof Slab 125mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Roof Slab 100mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Lintels Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for For Sunshades 0.60 mts wide with 0.075m thick at fixed end and 0.050m thick at free end Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Brick Masonry for panel walls in superstructure with CM (1:8) prop:using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials to site, and all labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504). FOR SUPER STRUCTURE Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Masonry for panel walls in Superstructure with CM (1:6) prop: (cement : sand) using Fly Ash Lime Solid Blocks of size 290mm X 225mm X 140mm and having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash solid blocks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).For Basement Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm(1:5) thick in one coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for for finished item of work. (APSS 901,903 & 904) - External Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. 12mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand (screened), water proofing compound etc., to site and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing skirting to internal walls to 10.0 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of MS Iron Grills including cost and conveyace of all materials and all labour charges etc., complete for finished item of workIncluding contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing and fixing factory made UPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) BMT-P.80.A Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:3) including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., complete including seigniorage charges etc., complete for finished item of work. (APSS No.701 & 707) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 200 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Flooring with pressed clay flooring tiles, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with cement mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:5:10) for Dummy Columns proportion (cement: fine aggregate: Coarse aggregate) using 40mm size (SS5) hard granite metal (Coarse aggregate)from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, lift charges, curing etc., complete as per drawings but excluding cost of steel and its fabrication charges for finished item of work. (APSS No. 402 & 403) for Dummy Columns. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:2:4) proportion nominal mix (Cement:Fine aggregate: Coarse aggregate) using 12mm size (SS5) graded machine crushed Hard granite metal (Coarse Aggregate) from approved quarry including cost & conveyance of all materials like cement, Fine aggregate(Sand), Coarse Aggregate, water etc. to site including seigniorage charges, sales and other taxes on all materials and all operational, incidental, labour charges such as centering, shuttering, machine mixing, laying concrete, curing etc., complete but excluding cost of steel & its fabrication charges, for Racks & Platforms, Sill Slabs for finished item of work. (APSS No. 402 & 03)Septic Tank Precasted Slabs. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:2:4) proportion nominal mix (Cement:Fine aggregate: Coarse aggregate) using 12mm size (SS5) graded machine crushed Hard granite metal (Coarse Aggregate) from approved quarry including cost & conveyance of all materials like cement, Fine aggregate(Sand), Coarse Aggregate, water etc. to site including seigniorage charges, sales and other taxes on all materials and all operational, incidental, labour charges such as centering, shuttering, machine mixing, laying concrete, curing etc., complete but excluding cost of steel & its fabrication charges, for Racks & Platforms, Sill Slabs for finished item of work. (APSS No. 402 & 03)25mm thick Racks :(Pre-Casted). Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and Fixing of Doors as per approved drawings with Medium Teak Wood Frame Section 100mm x 65 mm and ISI marked Teak Wood Shutters Fully Panelled Doors including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked M.S Powder Coated fixtures of 6 Nos butt hinges 125mm long , 1 No. aldrop 300mm x 16 mm dia, 2 Nos tower bolts of 200 mm x 12 mm dia at top, 1 No. tower bolt of 150mm x 12mm dia at bottom, 2 Nos. 150mm long handles, 1 Nos heavy duty door stoppers and 1 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (Door of Size 1050mm x 2100mm) D1 Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of Door Shutters made of rigid PVC extruded hollow section of 20mm X 200 mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements. The shutter frame is made of 30mm X 79mm with the wall thickness of 1.5mm +/-0.15mm section mitre-cut and joined at 4 corners with 125mm X 225mm plastic brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Painting with Acrylic Plastic Emulsion Paint of Interior Premium Grade Standard make to Interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.For Internal Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with Acrylic Plastic Emulsion Paint of Exterior Premium Grade Standard make to Exterior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.For Exterior Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting the Teak Door with Polishing including all Labour Charges etc Complete Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supplying and Fixing of Stainless Steel Hand Railing as per approved drawing with top rail of 50mm dia pipe, 32mm dia pipe, 25mm dia pipe and 2mm thick medium class including cost and conveyance of all materials, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work.. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Electrical Arrangements

Supply and Fixing of 25mm dia 1.8mm thick (Medium type) PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) concealed in wall with all required accessoriesincluding masonary work for light, fan and separate plug point with 16 SWG MS deep box including all labour charges etc., complete. Including contract profit, overhead charges, But excluding GST

Supply and Fixing of 25mm dia 2.20mm thick heavy type PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.. Including contract profit, overhead charges, But excluding GST

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FRLS) P.V.C. insulated flexible copper cable of makes Gold Medal (ISI MARK) in existing pipe with 6A switch and Ceiling rose of make Anchor/ Gold Medal Olive/ Million Zoom and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings . Including contract profit, overhead charges, But excluding GST

Supply and fixing of 6A 3/2 pin wall plug modular socket with 6A, 1way switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : Legrand Arteor,/Schneider Zen celo/Honewell Blenge plus. . Including contract profit, overhead charges, But excluding GST

Supply and Fixing of 16A 3pin and 6A 3pin plug socket with shutter and 16A modular type switch with ndicator, Galvanised hot deep box, cover frame including earth connections and all labour charges etc., complete.Makes of Switches : Legrand Arteor,/Schneider Zen celo/Honewell Blenge plus. . Including contract profit, overhead charges, But excluding GST

Supply and fixing of batten holder / slanting holder of make Anchor/ Gold Medal Olive/ Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 7.0W LED Bulb/Lamp. . Including contract profit, overhead charges, But excluding GST

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for earth continuity including all labour charges etc., complete... Including contract profit, overhead charges, But excluding GST

Supply and Run of 2 of 36/0.3mm (2.5 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for mains inlcuding all labour charges etc., complete.. Including contract profit, overhead charges, But excluding GST

Supply and fixing of 20W,1900 lumens T8,1200mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : Surya /C&S/ Fortune Art / Syska / Enrich / Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/ Orbit/Panasonic/Trinic/Lumens/ilite b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT . Including contract profit, overhead charges, But excluding GST

Supply,transportation and fixing of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan of make Crompton Decora/ Bajaj G Gold/ Havells Deco/ Usha Striker/ Orient PSPO. with 3 Blades and double ball bearings with all standard accessories and Stepped type electronic regulator of makes Miltec/ Vimal opel/ Maru Mantero/ Starex smile/ CPL. including labour charges etc . Including contract profit, overhead charges, But excluding GST

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.. Including contract profit, overhead charges, But excluding GST

Supply and fixing SPN 8 way Distribution board with IP-43 protection (Metal Door) suitable for single phase 40A DP Isolator as incomer and 8Nos. 6-32A 10kA SP MCBs (make Standard/ Havells/ HPL/ Toyoma) as outing going including internal connection and labour charges for surface / flush mounting etc., complete.. Including contract profit, overhead charges, But excluding GST

Drilling of Borewell and Water Supply and Sanitation

Drilling of borewell by down the hole hammer with DTH rig to a finished dia of 112/165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation all consolidated formation etc., and reaming the bore to subinsertion of required casing pipe etc., Including insertion of casing pipe with couplings caps any other revaent materials upto required depth as directed by the department , transportation of drilling rigs and supporting vehicle and including bore development. flushing of borewell at an average pressure of 150 PSI conducting yield test Crew charges done to the satisfaction of the department and including all labour charges and all taxes , but excluding the cost of casing pipe etc., The entir work should be carried out as per IS 2800 Part I & II 1979 and 11189 of 1985 and amended from timt to time Including contract profit, overhead charges, But excluding GST

Cost supply of 140mm dia. PVC 6kg per sqmm class III for casing Including contract profit, overhead charges, But excluding GST

Cost supply of 180mm dia. PVC 6kg per sqmm class III for casing CSSR Including contract profit, overhead charges, But excluding GST

Towards slotting charges for 180mm dia. PVC BORE WELL CAP Including contract profit, overhead charges, But excluding GST

Towards slotting charges for 180mm dia. PVC pipes Including contract profit, overhead charges, But excluding GST

Supply of WPSC insulated 3core 2.50sqmm flat copper cable CSSR Including contract profit, overhead charges, But excluding GST

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete., ELEC 5.4.15 Including contract profit, overhead charges, But excluding GST

Towards cost supply of cablejointing kit Including contract profit, overhead charges, But excluding GST

Supply and Transportation of 1 HP 10 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well.Makes: Pluga / Sterling / Falcon / Kumar / Unnati Zen/Duke/Lada/Ellen/Suguna/UNItek/KSP/Anco/Sabar/Fitwell ELEC 5.4.2 Including contract profit, overhead charges, But excluding GST

Manufacture, Supply and Delivery of Unplasticised PVCs Pipe of 25mm dia for potable water supplies conforming to IS: 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. Including contract profit, overhead charges, But excluding GST

S& F GIunion 25.4 mm Ist Quality Including contract profit, overhead charges, But excluding GST

Supplying and fixing Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges etc. complete for finished item of work. Including contract profit, overhead charges, But excluding GST

Supplying & fixing Gunmetal (GM) Horizontal Check(Non Return Valve) Valve as per IS-778 I-class heavy duty - 25 mm NB Size. Including contract profit, overhead charges, But excluding GST

Manufacture, Supply and Delivery of Unplasticised PVCs Pipe of 20mm dia for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. Including contract profit, overhead charges, But excluding GST

S&F 19.05 mm GI Union joint Including contract profit, overhead charges, But excluding GST

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors. Including contract profit, overhead charges, But excluding GST

Labour Charges for Fixing and Installation of MonomBlock/Submerssible Motor with All Accessories. Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes of 75mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326). Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes of 90mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes of 110mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)Including contract profit, overhead charges, But excluding GST

Cost supply and fixing of Clampsets. Including contract profit, overhead charges, But excluding GST

Manufacture, Supply, & Delivery of HDPE Pipes 25mm dia 16kg/sqcm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90mm dia. in coil & above 90 mm dia. straight length.Including contract profit, overhead charges, But excluding GST

Cost supply of SS Nipples. Including contract profit, overhead charges, But excluding GST

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks. Including contract profit, overhead charges, But excluding GST

Supplying & Fixing 76.20mm (3") Prince/ Sudhakar or Equivalantal PVC/SWR Nahany trap with Jali for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.Including contract profit, overhead charges, But excluding GST

Supplying & Fixing white glazed flat back half stall Urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for all floors..Including contract profit, overhead charges, But excluding GST

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/ Esso or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work..Including contract profit, overhead charges, But excluding GST

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap 400 grams Seiko or equivalent complete including cost and conveyance of all materials to site, for finished item of work for all floors...Including contract profit, overhead charges, But excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.15.90mm OD Pipe .Including contract profit, overhead charges, But excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.22.20mm OD Pipe .Including contract profit, overhead charges, But excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.28.60mm OD Pipe .Including contract profit, overhead charges, But excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.34.90mm OD Pipe .Including contract profit, overhead charges, But excluding GST

TOTAL 79(SEVENTY NINE) ITEMS

Refilling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20 B(APSS 308) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supplying, fitting and placing HYSD /TMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded (APSS no 126) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Filling with Selected earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Plinthbeams Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Columns Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Roofbeams Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Roof Slab 125mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Roof Slab 100mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Lintels Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M25 Gr design mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for For Sunshades 0.60 mts wide with 0.075m thick at fixed end and 0.050m thick at free end Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Brick Masonry for panel walls in superstructure with CM (1:8) prop:using second class traditional bricks of size 23x11x7 cm from approved quarry and having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials to site, and all labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504). FOR SUPER STRUCTURE Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Masonry for panel walls in Superstructure with CM (1:6) prop: (cement : sand) using Fly Ash Lime Solid Blocks of size 290mm X 225mm X 140mm and having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, fly ash solid blocks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).For Basement Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm(1:5) thick in one coat for even surfaces with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for for finished item of work. (APSS 901,903 & 904) - External Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. 12mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand (screened), water proofing compound etc., to site and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing skirting to internal walls to 10.0 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of MS Iron Grills including cost and conveyace of all materials and all labour charges etc., complete for finished item of workIncluding contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing and fixing factory made UPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) BMT-P.80.A Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:3) including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., complete including seigniorage charges etc., complete for finished item of work. (APSS No.701 & 707) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 200 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Flooring with pressed clay flooring tiles, set over base coat of cement mortar (1:8) 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with cement mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:5:10) for Dummy Columns proportion (cement: fine aggregate: Coarse aggregate) using 40mm size (SS5) hard granite metal (Coarse aggregate)from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, lift charges, curing etc., complete as per drawings but excluding cost of steel and its fabrication charges for finished item of work. (APSS No. 402 & 403) for Dummy Columns. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:2:4) proportion nominal mix (Cement:Fine aggregate: Coarse aggregate) using 12mm size (SS5) graded machine crushed Hard granite metal (Coarse Aggregate) from approved quarry including cost & conveyance of all materials like cement, Fine aggregate(Sand), Coarse Aggregate, water etc. to site including seigniorage charges, sales and other taxes on all materials and all operational, incidental, labour charges such as centering, shuttering, machine mixing, laying concrete, curing etc., complete but excluding cost of steel & its fabrication charges, for Racks & Platforms, Sill Slabs for finished item of work. (APSS No. 402 & 03)Septic Tank Precasted Slabs. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:2:4) proportion nominal mix (Cement:Fine aggregate: Coarse aggregate) using 12mm size (SS5) graded machine crushed Hard granite metal (Coarse Aggregate) from approved quarry including cost & conveyance of all materials like cement, Fine aggregate(Sand), Coarse Aggregate, water etc. to site including seigniorage charges, sales and other taxes on all materials and all operational, incidental, labour charges such as centering, shuttering, machine mixing, laying concrete, curing etc., complete but excluding cost of steel & its fabrication charges, for Racks & Platforms, Sill Slabs for finished item of work. (APSS No. 402 & 03)25mm thick Racks :(Pre-Casted). Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and Fixing of Doors as per approved drawings with Medium Teak Wood Frame Section 100mm x 65 mm and ISI marked Teak Wood Shutters Fully Panelled Doors including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked M.S Powder Coated fixtures of 6 Nos butt hinges 125mm long , 1 No. aldrop 300mm x 16 mm dia, 2 Nos tower bolts of 200 mm x 12 mm dia at top, 1 No. tower bolt of 150mm x 12mm dia at bottom, 2 Nos. 150mm long handles, 1 Nos heavy duty door stoppers and 1 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (Door of Size 1050mm x 2100mm) D1 Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of Door Shutters made of rigid PVC extruded hollow section of 20mm X 200 mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements. The shutter frame is made of 30mm X 79mm with the wall thickness of 1.5mm +/-0.15mm section mitre-cut and joined at 4 corners with 125mm X 225mm plastic brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Painting with Acrylic Plastic Emulsion Paint of Interior Premium Grade Standard make to Interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.For Internal Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with Acrylic Plastic Emulsion Paint of Exterior Premium Grade Standard make to Exterior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.For Exterior Walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting the Teak Door with Polishing including all Labour Charges etc Complete Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supplying and Fixing of Stainless Steel Hand Railing as per approved drawing with top rail of 50mm dia pipe, 32mm dia pipe, 25mm dia pipe and 2mm thick medium class including cost and conveyance of all materials, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work.. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Electrical Arrangements

Supply and Fixing of 25mm dia 1.8mm thick (Medium type) PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) concealed in wall with all required accessoriesincluding masonary work for light, fan and separate plug point with 16 SWG MS deep box including all labour charges etc., complete. Including contract profit, overhead charges, But excluding GST

Supply and Fixing of 25mm dia 2.20mm thick heavy type PVC pipe of make Sudhaka/ Maco plast/ Modi (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.. Including contract profit, overhead charges, But excluding GST

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FRLS) P.V.C. insulated flexible copper cable of makes Gold Medal (ISI MARK) in existing pipe with 6A switch and Ceiling rose of make Anchor/ Gold Medal Olive/ Million Zoom and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings . Including contract profit, overhead charges, But excluding GST

Supply and fixing of 6A 3/2 pin wall plug modular socket with 6A, 1way switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : Legrand Arteor,/Schneider Zen celo/Honewell Blenge plus. . Including contract profit, overhead charges, But excluding GST

Supply and Fixing of 16A 3pin and 6A 3pin plug socket with shutter and 16A modular type switch with ndicator, Galvanised hot deep box, cover frame including earth connections and all labour charges etc., complete.Makes of Switches : Legrand Arteor,/Schneider Zen celo/Honewell Blenge plus. . Including contract profit, overhead charges, But excluding GST

Supply and fixing of batten holder / slanting holder of make Anchor/ Gold Medal Olive/ Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 7.0W LED Bulb/Lamp. . Including contract profit, overhead charges, But excluding GST

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for earth continuity including all labour charges etc., complete... Including contract profit, overhead charges, But excluding GST

Supply and Run of 2 of 36/0.3mm (2.5 Sq.mm) FRLC P.V.C. insulated flexible copper cable of makes GM/ L&T/ RPG/Havells/ V-Guard/ Powerflex/ Polycab/ Gold Medal/ Standard/ Million/ Vimal/ Sun cab/ Paragon/ Delton (ISI MARK) in existing pipe for mains inlcuding all labour charges etc., complete.. Including contract profit, overhead charges, But excluding GST

Supply and fixing of 20W,1900 lumens T8,1200mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : Surya /C&S/ Fortune Art / Syska / Enrich / Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/ Orbit/Panasonic/Trinic/Lumens/ilite b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT . Including contract profit, overhead charges, But excluding GST

Supply,transportation and fixing of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan of make Crompton Decora/ Bajaj G Gold/ Havells Deco/ Usha Striker/ Orient PSPO. with 3 Blades and double ball bearings with all standard accessories and Stepped type electronic regulator of makes Miltec/ Vimal opel/ Maru Mantero/ Starex smile/ CPL. including labour charges etc . Including contract profit, overhead charges, But excluding GST

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.. Including contract profit, overhead charges, But excluding GST

Supply and fixing SPN 8 way Distribution board with IP-43 protection (Metal Door) suitable for single phase 40A DP Isolator as incomer and 8Nos. 6-32A 10kA SP MCBs (make Standard/ Havells/ HPL/ Toyoma) as outing going including internal connection and labour charges for surface / flush mounting etc., complete.. Including contract profit, overhead charges, But excluding GST

Drilling of Borewell and Water Supply and Sanitation

Drilling of borewell by down the hole hammer with DTH rig to a finished dia of 112/165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation all consolidated formation etc., and reaming the bore to subinsertion of required casing pipe etc., Including insertion of casing pipe with couplings caps any other revaent materials upto required depth as directed by the department , transportation of drilling rigs and supporting vehicle and including bore development. flushing of borewell at an average pressure of 150 PSI conducting yield test Crew charges done to the satisfaction of the department and including all labour charges and all taxes , but excluding the cost of casing pipe etc., The entir work should be carried out as per IS 2800 Part I & II 1979 and 11189 of 1985 and amended from timt to time Including contract profit, overhead charges, But excluding GST

Cost supply of 140mm dia. PVC 6kg per sqmm class III for casing Including contract profit, overhead charges, But excluding GST

Cost supply of 180mm dia. PVC 6kg per sqmm class III for casing CSSR Including contract profit, overhead charges, But excluding GST

Towards slotting charges for 180mm dia. PVC BORE WELL CAP Including contract profit, overhead charges, But excluding GST

Towards slotting charges for 180mm dia. PVC pipes Including contract profit, overhead charges, But excluding GST

Supply of WPSC insulated 3core 2.50sqmm flat copper cable CSSR Including contract profit, overhead charges, But excluding GST

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete., ELEC 5.4.15 Including contract profit, overhead charges, But excluding GST

Towards cost supply of cablejointing kit Including contract profit, overhead charges, But excluding GST

Supply and Transportation of 1 HP 10 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well.Makes: Pluga / Sterling / Falcon / Kumar / Unnati Zen/Duke/Lada/Ellen/Suguna/UNItek/KSP/Anco/Sabar/Fitwell ELEC 5.4.2 Including contract profit, overhead charges, But excluding GST

Manufacture, Supply and Delivery of Unplasticised PVCs Pipe of 25mm dia for potable water supplies conforming to IS: 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. Including contract profit, overhead charges, But excluding GST

S& F GIunion 25.4 mm Ist Quality Including contract profit, overhead charges, But excluding GST

Supplying and fixing Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges etc. complete for finished item of work. Including contract profit, overhead charges, But excluding GST

Supplying & fixing Gunmetal (GM) Horizontal Check(Non Return Valve) Valve as per IS-778 I-class heavy duty - 25 mm NB Size. Including contract profit, overhead charges, But excluding GST

Manufacture, Supply and Delivery of Unplasticised PVCs Pipe of 20mm dia for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. Including contract profit, overhead charges, But excluding GST

S&F 19.05 mm GI Union joint Including contract profit, overhead charges, But excluding GST

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors. Including contract profit, overhead charges, But excluding GST

Labour Charges for Fixing and Installation of MonomBlock/Submerssible Motor with All Accessories. Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes of 75mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326). Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes of 90mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) Including contract profit, overhead charges, But excluding GST

Supplying and fixing of SWR PVC pipes of 110mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)Including contract profit, overhead charges, But excluding GST

Cost supply and fixing of Clampsets. Including contract profit, overhead charges, But excluding GST

Manufacture, Supply, & Delivery of HDPE Pipes 25mm dia 16kg/sqcm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90mm dia. in coil & above 90 mm dia. straight length.Including contract profit, overhead charges, But excluding GST

Cost supply of SS Nipples. Including contract profit, overhead charges, But excluding GST

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks. Including contract profit, overhead charges, But excluding GST

Supplying & Fixing 76.20mm (3") Prince/ Sudhakar or Equivalantal PVC/SWR Nahany trap with Jali for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work.Including contract profit, overhead charges, But excluding GST

Supplying & Fixing white glazed flat back half stall Urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for all floors..Including contract profit, overhead charges, But excluding GST

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/ Esso or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work..Including contract profit, overhead charges, But excluding GST

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap 400 grams Seiko or equivalent complete including cost and conveyance of all materials to site, for finished item of work for all floors...Including contract profit, overhead charges, But excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.15.90mm OD Pipe .Including contract profit, overhead charges, But excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.22.20mm OD Pipe .Including contract profit, overhead charges, But excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.28.60mm OD Pipe .Including contract profit, overhead charges, But excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.34.90mm OD Pipe .Including contract profit, overhead charges, But excluding GST

TOTAL 79(SEVENTY NINE) ITEMS