SPECIAL REPAIR TO BLDG NO P-13 OFFR ACCN WITH SERVANT QTR AT GHUNGHORA UNDER OF GE DEHRADUN

Amount

M&L for Brickwork with subclass ‘B’ bricks using old size bricks, straight or curved on plan exc 6m mean radius, built in 1:6 complete including demolition all as specified

Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specifeid

M &L 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth complete all as specified

M&L for 10 mm thick rendering in cement mortar 1:3 on on fair faces of concrete surfaces finished even and smooth as in ceiling cement complete all as specifeid

M&L for preparation of wall and applying interior grade wall care putty 1 mm thick to make the surface smooth as specified and directed.

M&L for preparation of wall and applying exterior grade wall care putty 1 mm thick to make the surface smooth as specified and directed.

M&L for Preparation of new surface of wall and applying two coat of oil bound distemper includind and over Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for prepration with complete removal of existing treatment of old surface of wall and applying two coat of oil bound distemper includind and over Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

Material & Labour for prepration of new plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed.

Material & Labour for prepration with complete removal of existing treatment of old plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed.

Taking down chowkat with shutter of any description (without taking of shutter from frame) n. exc 1.5 Sqm each complete all as specified and as directed .

ditto as item No 12 but exc,1.5 sqm & not exc. 4 sqm

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm complete all as specified and directed.

M&L for Pressed steel frames size 105x60 mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed

M&L for Pressed steel frames size 165x60 mm for doors with one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed

Supply and fix flush shutters 30 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on other sides, complete all as specified and as directed.

S & F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F in repair stainless steel 304 grade wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified in SSR Part I and directed .

S&F Factory made 100% solid wood plastic composite ( WPC) door frame of size 70 mm x 40 mm mm made from wood plastic composite (single etruded process) material with density 750 kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specified and drawing complete all as specified and diercted by Engr-in-charge

S&F 30mm thick moulded WPC factory made 100 % solid ( conforming as per IS-4020) made from lead free single extruded with 2,4, or 6 raised panel design on the front side with 10 mm deep mould on single with grain texure and back side plain with density not less than 650 Kg/cum, Manufacturer by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardent and having screw holding capacity

S&F 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed .

S&F 150mm size solid in one piece stainless steel 202 grade bright finish barrel tower bolt 10 m dia shoot and fixed with stainless steel screws complete all as specified and directed

S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed.

S&F stainless steel sliding door bolts SS 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified

S&F Floor door stopper of Aluminium alloy body double spring and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed.

M&L applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified.

M&L preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified.

S & F Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F rolled section in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, staging for water tanks, gusset plates etc. conforming Fe-410W(Gde E-250) complete all as specified and as directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe-410W(Gde E-250) complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls/chajja covering etc fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge /covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for 25 mm thick cement concrete in 1:2:4 type B-1 ( 20 mm graded aggregate INCLUDIND DEMOLITION complete all as specified and directed

S&F vitreous chinaware wash down water closet pan padestal pattern white with seat cover excluding fixing bolts but including jointing to flushing cistern and flush pipe anti syphonage pipe including Jet spray etc complete all as specified and directed

S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & Flanges complete all as specified and directed. Make : Jaquar Model No CON 281KN, HSH 1929 & OHS 1989 or equivalent in Hindware/ Parryware.

S&F in repair 15mm dia CP brass chromium plated Central hole basin/sink mixer with accessories for fixing hot and cold water, dcrewed down for 15mm bore GI pipe, complete all as specified and directed. Make : Jaquar, Cat Pat No SOL-6001B or equivalent in Hindware / Parryware.

S&F 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified

S&F chromium plated stop valves/ angle valve/ concealed angle valve etc, cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified

S&F 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specifed

S&F AS IN REPAIR 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed

S&F vitreous china padestal wash hand basin, white flat back, size 580x450mm excluding taps, waste pipe chain and plug and porcelain but including brackets all as specified

S&F AS IN REPAIR brass chromium plated ovehead shower with shower arm complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing and removing from site ,complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for20 mm bore GI tubing and removing from site ,complete all as specified and directed.

S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.

S&F galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified

M & L 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified.

S & F 75 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified.

S & F in repair 110 mm bore UPVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M & L PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work ANDDEMOLITION complete.

M&L for 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F 20mm dia brass chromium plated tubular towel rails fancy, D type, 60cm long between flanges, complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement mortar 1:6 screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick IN RISER OF STEP. SKIRTIMG, dado over 15 mm thick cement mortar 1:6 RENDEING laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 40mm graded stone aggregate INCL DEMOLITIONall as specified and directed

M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete.

S&F Brass chromium plated wall mixer complete all as specified and directed.

S&F CP central hole basin mixer fancy type 15mm dia all as specified and directed.

M&L heavy duty anti skid parking coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.36 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

M & L for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete.

S&F factory made pre laminated WPC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete as per manufactue specification.

S&F stainless steel auto closing 35 mm of o crank(KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified.

S&F in repairs stainless steel peg set of five with cromium plated back plate 304 grade,40mm wide fixed with chromium plated screw, complete all as specified and directed.

S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils of size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (plate basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly

S&F in repair chrome plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

S&F in repair chrome plated stainless steel wire basket (grain trolly basket) pull out type for large utensils of size 480 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed.

M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

M&L glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:6 (but not backing) and rubbish off the premises complete all as specified

M & L double charged vitified tiles 8-10 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 Sqm in floors e.t.c in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match of coloured tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified

All as per item No 50 above but in dado and skirting - ditto-

Cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified

Supply and fix in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm Shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm

S&F SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete.

S&F glass corner shelf suitable size made of 5mm thick toughned glass all as specified.

S&F CP Health Faucet with 1.20 mtr metalic Expandable tube & hook complete all as specified and directed and approved

Supply & fix IN REPAIR for powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with glass 5mm thick, fixed with glazing clips, aluminium grill with mesh size 75 mm and aluminium bar 6 mm XPM type, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc, complete all as specified and directed Shutter Top & bottom size:- 37.50 x 15.00 x 1.60 mm Shutter inner lock size:- 37.50 x 15.00 x 1.60 mm Shutter side (Handle) size:- 37.50 x 15.00 x 1.36 mm Chowkhat bottom size:- 50.30 x 26.00 x 1.20 mm Chowkhat top & sides size:- 50.30 x 26.00 x 1.00 mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata

One light point controlled by one, one way 6 Amp switchs

One fan/exhaust fan point controlled by one, one way 6 Amp switchs

One 5 pin 5/6 Amps socket outlet point on the independent board with other switchs.

One 5 pin 5/6 Amps socket outlet point on same board controlled by one, one way switchs.

One bell point controlled by one, one way 6 Amp button switch.

Description all as per item No 90 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

S & F in replacement Electronic steppped type fan regulator 100 watt 230 volts AC 50 Hz..

S & F in replacement switch piano, flush type, single pole one way 6 Amp .

S & F in replacement switch piano, flush type, single pole one way 16Amp .

S & F in replacement socket outlet, multipurpose, 2 in 1 5 pin, 6 Amp.

S&F in replacement socket outlet, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator .

S & F in replacement bell push flush type, 5 Amps .

S & F in replacement Electric bell 230 volts AC .

S & F in replacement ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body .

Taking down the existing Energy meters carefully and proper noted down the qtr No Meter No and reading with date and kept in safe custody for re-fixing at site after compltion of bldg work complete.

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4Sqmm + 1 x 4 sqmm

2x 1.5 Sqmm + 1x1.5 Sqmm

S & F in replacement Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable capacity fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 protection,415 volt and suitable for fixing FP MCCB 100/125 Amps as incomer and combination of SP/TP MCBs as outgoings of following capacity including taking down old unsv MCCB DB,s. Note: Suitable MCCB and outgoing MCBs will be measuredand paid separately under relavant items of this schedule.

4 Way VTPN DB

S & F in replacement MCCB ,4 pole ICS=100% ICU at 415 volts with thermal-magnetic release and adjustable overload setting of following capacity .

63 Amps with rupturing capacity 16 KA

S & F in replacement MCB SP 240 volts 'B' Curve 10 KA . including connection with suitable size copper lugs of following capacity

MCB SP 6 to 32 Amp.240 volts

MCB SPN 40 to 63 Amps 240 volts

S & F in replacement Distribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) 20 AMP MCB Combo box DP including plug top complete all as specified and directed

S & F in replacement MCB DB, sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection of following size:-

8 way SPN DB.

S & F in replacement Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings .

Supply and fix in replacement Exhaust fan 300 mm sweep, 900 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m, 900 RPM complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

S&F BLDC Ceiling Fan complete with electronic type regulator and remote accessories 230 V,1200 mm sweep. BEE 5 star rated PVC AC single Phase 230 V / 240V 50 Hz of , complete connecting up ceiling rose to connector block of fan including fabricating and fixing of Fan hooks from ceiling truss/angle iron, required length of down rods (Aas per site requirement) and necessary nuts and bolts complete all as specified and directed.

Supply and Fixing in replacement high prssure die cast alluminium LED Batten light fitting 20W ,125 lumens /watt,IP-20,colour temp not less than 6500,inbuilt electronic driver, PF not less than 0.90 , inbuilt surge protection minimum 2.5KV

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Material and labour for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc. GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

GOEL INFRATECH (BID ID -3450012)

M/s Anil Kumar (BID ID -3450079)