Minor repairing and painting Internal surfaces including replacement of Sanitary and Water fittings of University Guest House at Tezpur University Campus Napaam

Amount

Scheduled Items

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size, Size of Tile 1200 x 1200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe, 32 mm dia

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Non-Scheduled Items

Supplying , fitting and fixing C.P Wall mixer Jaquar make FLR-5281 Wall mixer 3 in 1 system

Supplying , fitting and fixing C.P Health faucet Shower with 1.2m PVC flexible tube and ABS wall bracket etc. complete.

Supplying, fitting and fixing C.P 2 in 1 Bib cock Jaquar make( DRC-CHR-37041)

Supplying , fitting and fixing C.P Overhead Shower make Jaquar Brass 200 x 200mm

Supplying , fitting and fixing Parryware cascade Round wash Besin area cascade Nxt CASCADE NXT C0431

Supplying, fitting and fixing C.P Parryware E8300 cascade soft close seat cover

Multi floor Trap (SLP) without Jali 110mm x 4'' Floor Trap inside Broken

Supplying , fitting and Fixing Parryware vetreous commode seat cover

C120 Europa Cylindrical Lock

Jaquar soap Dish Holder Square

Kohler Instaflush Mechanical Tank 3/61

Kohler Complementary Angle valve

KOHLER Flush Ball

Exposed part ket of Concealed Stop Cock OCK