Tender for White wash, Distemper, Polishing works in Seminar Rooms, Class Rooms, Student Dormitories during summer vacation at IIMA Main Campus

Amount

White washing and allied works

Whitewashing with lime in TWO or more COATS to give an even shade to existing walls and ceilings including scaffolding, cleaning the existing white washed surface to the maximum with SAND paper & WATER paper, filling up holes cracks etc. with POP to the satisfaction of site in charge including cost of lime powder and DDL, etc. complete all as per specification. Glue good quality / Lime used shall be freshly burnt class C Lime (fat lime) and white in color. Best quality of gum and Ultramarine blue or indigo shall be used in the preparations of white wash.

White wash as per item no. 101 but on cement coated surface TWO or more coats as required at site to be considered as new surface.

Scraping the existing distemper patches if required as per site condition using SAND paper and water paper to maximum. Providing & applying two or more coats of putty work two coats of primer to complete satisfaction of the Engineer. The rates shall be inclusive of surface preparation, filling of holes and edges with P.O.P .Providing & applying of three coats of distemper of Acrylic Washable Distemper as per specification. Cleaning the floor, doors, windows, switch boards etc. completed.

Cleaning the new surface wall or ceiling as per site condition using SAND paper and water paper to maximum. Providing & applying two or more coats of putty work two coats of primer to complete satisfaction of the Engineer. The rates shall be inclusive of surface preparation, filling of holes and edges with P.O.P .Providing & applying of three coats of distemper of Acrylic Washable Distemper as per specification. Cleaning the floor, doors, windows, switch boards etc. completed.

Painting STRUCTURAL STEEL with TWO COAT of SYNTHETIC ENAMEL PAINT of FIRST quality and approved SHADE to give an even shade including cleaning the surfaces with SAND / WATER PATER etc. complete all as per specifications. LOCATION : Existing grills of doors, windows & ventilators.

Painting wood work with TWO or more coats of SYNTHETIC ENAMEL PAINT of FIRST quality and approved SHADE to give an even shade over required coats of primer including cleaning the surfaces with sand paper or water paper, filling the crevices with approved filler, putty work [ONE or TWO coats] on scaffolding, etc. complete all as per specifications. Location: Old surfaces of Door, window & ventilators of Dorm rooms

Providing & applying two or more coats of Lacquer polish (mat or glossy) of approved make including cleaning the surface, filling the crevices or holes with approved filler, tripod, ladder etc. Complete as per satisfaction of Engineer in charge. Location old existing wooden surfaces

Providing & applying two or more coats of French polish (mat or glossy) including cleaning the surface, filling the crevices or holes with approved filler and shellac at0.245kg./10 sqm. etc. tripod, ladder etc. Complete as per satisfaction of Engineer in charge. Location : old existing wooden surfaces.

Providing & Applying Duco spray paint (MAT Finish) on outer side of old cupboard, removing of rust on surface with sand paper or wire brush to peeling paint, rust spot etc. complete with water cleaning. After removing apply DUCO putty to fill crevices or level undulation if any after level surface with sand paper. Apply first coat of duco paint proportion of 1 litter paint: 500 ml thinner to the entire surface with spraying machine, be sure to use wider sweeping strokes to prevent the colour from pooling and dripping and allow to dry. Apply second coat of duco paint after draying of first coat same process as first coat and allow to dry. Old work. Before starting the mass work approve sample first.

Providing & applying tel pani polish matching with existing polish

Design unit interiors

NORMS CONSTRUCTION

PATEL CONSTRUCTION COMPANY