RequiredExperience with Government
RequiredAnnual Turnover Bid to RA enabled No Premoulded Sanitation Superstructure (In 1 Piece) ( 20 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Configuration Pre-cast complete structure in one piece with Foundation having Toilet seat – Taps and Flushing arrangement Pre-cast complete structure in one piece with Foundation having Toilet seat – Taps and Flushing arrangement Scope of supply Supply-Installation and commissioning to be done by seller * 1/6 Transportations Freight charges Offer prices are on free delivery at consignee site basis included all freight charges * Approval of advance sample before bulk supply No advance sample * Plumbing and sanitation fitting connection to be done by seller Yes * Electrical connection to be done by seller Yes * Waste extraction fitting to be done by seller Yes * Civil foundation to be done by seller Yes * Type of WC Indian/Orissa pan Indian/Orissa pan
RequiredEuropean/Western
RequiredNo WC – only Urinal Type of Urinal No Urinal – only WC Ladies Urinal
RequiredGent’s Urinal
RequiredNo Urinal – only WC Water facility HDPE water tank (200 ltrs) HDPE water tank (200 ltrs) Sewage facility Sanitation tank – RCC (Included as part of supply) Directly connected to sewer
RequiredSanitation tank – RCC (Included as part of supply) Roof shape Taper shape * Projection of roof No projection 50 mm projection on all the four sides
Required100 mm projection from front and 50 mm projection on other three sides
RequiredOnly 50 mm projection from front
RequiredNo projection Interiors Tiles on floor and walls ( up to 915 mm height ) and paints on remaining walls and roof Tiles on floor and walls ( up to 915 mm height ) and paints on remaining walls and roof Type of Foundation Inbuilt foundation Inbuilt foundation Size of platform to be declared by buyer – Write NA if not applicable - * Size and Number of - * 2/6 stairs to be declared by Buyer – Write NA if not applicable MATERIAL Concrete mix design Low porosity reinforce concrete in single piece of grade M–25 * Reinforcement steel Steel mesh of 100 mm X 100 mm using 3 mm Dia as main reinforcement TMT bar * Indian/Orissa toilet seat Ceramic made Ceramic made European toilet seat Integrated toilet seat ( With cistern ) Only toilet WC with seat
RequiredIntegrated toilet seat ( With cistern ) Cistern Plastic made of 8 ltrs capacity at height of 1220 mm Plastic made of 8 ltrs capacity at height of 1220 mm
RequiredCeramic made of 8 ltrs capacity at height of 1220 mm
RequiredPlastic made of 5 ltrs capacity at height of 1220 mm
RequiredCeramic made of 5 ltrs capacity at height of 1220 mm
RequiredN.A Tiles for floor Vitrified Vitrified
RequiredCeramic Colour and size of floor tiles - To be declared by Buyer - * Tiles on walls ( up to 915 mm height ) Vitrified Vitrified
RequiredCeramic
RequiredN.A Tiles on wall (up to ceiling height) N.A Vitrified
RequiredCeramic
RequiredN.A Colour and size of wall tiles - To be declared by Buyer - * Water tap Made of plastic Made of plastic Water tank ( with an openable lid ) Made of HDPE Made of HDPE Water tank frame Made of 3 mm thick MS angle of size 32 mm X 32 mm Made of 3 mm thick MS angle of size 32 mm X 32 mm Door support material Made of MS – in frame of 20 mm MS pipe with the reinforcement in centre * Door material MS sheet perforated on top 1000 mm for MS sheet perforated on top 1000 mm for 3/6 ventilation ventilation Material for Door fixing 4 nos. Hinges of size 100 mm with 3 mm thick and bolted using 75 mm nut and Bolt * Gent’s/Ladie’s Urinal No Urinal Made of ceramic
RequiredNo Urinal DIMENSION Outside height of Cubical ± 20 mm 2100 mm 2100 mm
Required2150 mm
Required2200 mm Outside length of Cubical ± 10 mm 1000 mm 1000 mm Outside width of Cubical ± 10 mm 900 mm 950 mm
Required900 mm Wall thickness ± 5 mm 50 mm 50 mm Door height ± 20 mm 2000 mm 2000 mm
Required1950 mm Door width ± 10 mm 900 mm 900 mm Door thickness ± 0[decimal]1 mm 0.8 mm 0.8 mm Roof thickness ± 10 mm 70 mm 70 mm Water tank frame size 740 mm X 740 mm 740 mm X 740 mm Size of WC 455 mm 455 mm
Required480 mm
Required510 mm
Required535 mm
RequiredN.A Size of foundation 1204 mm X 1254 mm X 195 mm(H) * COLOUR and FINISH Inside paint colour of cubical – To be declared by Buyer - * Outside paint colour of cubical - To be declared by Buyer - * Inside and Outside Finishing- To be free from all surface defects Yes * WARRANTY Warranty period 1 - Year 1 - Year CERTIFICATION Test reports to be furnished to buyer's on demand Yes * OEM of offered product is ISO 9001:2015 certified Yes * OEM of offered product is ISO 14001:2015 certified No * 4/6 OEM of offered product is ISO 18001:2007 certified No * Compressive strength of concrete mix – to be declared by Buyer - * RCC SANITATION TANK Design of RCC sanitation tank No sanitation tank 2 - Chamber
Required3 - Chamber
Required4 - Chamber
RequiredNo sanitation tank Capacity of RCC sanitation tank No sanitation tank 1800 ltrs
RequiredNo sanitation tank Provision for top strengthening of tank No sanitation tank * Provision for Lid/Cover of tank No sanitation tank * Additional informationrelated to sanitation tank (if any) – Write NA if not applicable - * Manufacturing material for tank No sanitation tank * Reinforcement steel for full body of sanitation tank (except Lid) No sanitation tank * Reinforcement steel for tank Lid No sanitation tank/No Lid * Lining material for sanitation tank No Lining 2 mm non woven geo textile
Required1 mm non woven geo textile
RequiredPlastic lining
RequiredNo Lining * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
