Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹17.5 L
EMD Value
₹18,000
Closing Date
20 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, R & B Division, Godhra
Upgradation of Deputy Collector Office Stamp Duty at Godhra Dist. Panchmahal.
363107
17 OF 2026-27
Open
Civil Works - Buildings
Works
Panchmahal
2 documents required · 2 mandatory
₹900
EXECUTIVE ENGINEER, R & B DIVISION, GODHRA
₹18,000
4 Nov 2026
4 Nov 2026
4 Nov 2026
20 Nov 2026
4 Nov 2026
90 days
Name of Work :- Upgradation of Deputy Collector Office, Stamp Duty at Godhra Dist.
BILL OF QUANTITIES
Memorandum showing item of works to be carried out.
It. Description of Item Qty. Unit Rates in Total
No. Figure Amount
1 Dismentaling tiled or stone floors laid in mortar including stacking of serviceable 3.90 Sq.m. 46.77
materials and disposal of unserviceable materials with all lead and lift.
2 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. 22.90 Sq.m. 52.03
stacking of serviceable materials and disposal of unserviceable materials with all
lead and lift. (ii) A.C. sheet roofing.
3 Dismentaling doors, windows, ventilators etc. (wood or steel) shutters including 10.00 Each 182.94
chowkhats architraves, holdfasts and other attachment etc. complete and stacking
them within all lead and lift. (i) Not exceeding 3 Sq.mt in area.
4 Providing and laying half brick work using common burnt clay building conventional 33.50 Sq.m. 657.67
type bricks having crushing strength not less than 35 Kg/Sq.cm in cement mortar
1:4 (1 cement : 4 coarse sand) in super structure for First floor including the cost
of all materials and labour charges etc. complete.
5 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4 0.03 Cum 7008.39
graded stone aggregates 20 mm nominal size) and curing complete excluding cost
of formwork and reinforcement for reinforced concrete work in (B) Lintels.
6 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work including 3.62 Kg. 76.21
bending, binding and placing in position complete upto floor two level.
7 Providing 15mm thick cement plaster in single coat on rough (similar) side of 46.80 Sq.m. 187.71
single or half brick walls for interior plastering upto floor two level and finished even
and smooth in cement mortar 1:3 (1-cement : 3 sand).
8 Providing & fixing 15mm thick quartz white artificial marble counter for basin 0.38 Sq.m. 3282.50
including making necessary grooves in walls and jointing with adhesive of approved
quality and full moulding the edges with necessary labour & material etc. complete.
9 Providing & laying 1200 mm x 600 mm G.V.T. Glossy tiles 8 to 10 mm thick in 17.33 Sq.m. 1760.43
skirting, risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement :
coarse sand) on new surface with 4 mm spacer and epoxy filling & cleaning the
surface complete as per detail approved by Architect / Engineer in charge.
10 Providing & laying 600 mm x 600 mm Anti skid Matt finished tiles flooring over 3.00 Sq.m. 1334.64
20 mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on new
surface with 4 mm spacer and epoxy filling with cleaning the surface etc. complete
as per detail approved by Architect / Engineer in charge.
11 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. U.P.V.C 30.00 Rmt. 148.12
pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.
Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall be
concealed as directed including necessary fitting etc. including testing of pipe and
joints and fixing the same with adhesive solvent including cost of all materials.
12 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. U.P.V.C 4.50 Rmt. 91.84
pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.
Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall be
concealed as directed including necessary fitting etc. including testing of pipe and
joints and fixing the same with adhesive solvent including cost of all materials.
13 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. U.P.V.C 2.50 Rmt. 72.65
pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.
Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall be
concealed as directed including necessary fitting etc. including testing of pipe and
joints and fixing the same with adhesive solvent including cost of all materials.
It. Description of Item Qty. Unit Rates in Total
No. Figure Amount
14 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm 1.00 Each 663.43
15 Providing and fixing approved SWR quality, heavy duty, uPVC pipes - Type B Ring 30.00 Rmt. 835.15
Fit and Self Fit, confirming to IS 13592 and fitting confirming to IS 14735 for waste
water or soil waste pipe, with necessary specials, bends, such as Y" junction, T"
junction (both single and double), including plugs, shoes, cowls, flange compression
type fittings, wall clips, in proper line and level with necessary support like
brackets/clamps, clips, RCC or brick pedestals or battens, if necessary, to wall,
ceiling and floor, open or concealed complete jointing with rubberising and airtight
joints, with ‘T’ shaped rubber ring, etc. and lubricant or jointing material including
testing, cutting, making good the wall, ceiling and floor etc. testing and installation of
pipe lines as per drawing and specification. (a) 110 mm dia. pipe.
16 Providing and fixing PVC anti Cockroach trap for drain - 100 mm diameter with 2.00 Each 722.15
jali of the following nominal diameter of self cleansing design with screwed down or
hinged grating including jointing, cutting, making good the walls, floors. Rate
including RCC slab hole. Testing and installation as per drawing and specification.
17 Providing and fixing 6 mm thick decorative mirror including machine polishing glass 0.45 Sq.m. 2525.00
all over and fixed with S.S. studs etc. complete with all required fittings & fixtures.
18 Providing and fixing Liquid Soap Dispenser in Glass Bottle with all necessary 1.00 Each 1220.08
accessories and fittings confirming to manufacturers specifications and including
drilling holes in the walls, inserting rawal plugs, fixing the dispenser to the wall with
G.I. screws, complete and making good to the satisfaction of Engineer in charge.
19 Providing and fixing Square Towel Ring 300 mm square in polished chrome with 1.00 Each 1359.46
concealed type brackets, fixed to the wall with C.P. screws etc. complete with all
fitting as per specifications of approved make and conforming to manufacturers
standards as directed by Engineer in charge.
20 Providing and fixing white vitreous china Wall Hung water closet (European type) 1.00 No. 21662.48
of size 360 x 490 x 330 mm of approved shape (Jaquar or equivalent ) including
providing and fixing white vitreous china cistern with dual flush fitting of flushing
capacity 3 litter/ 6 litter, including UF soft close slim seat cover, Hinges, Hand
Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall
Hook, Fixing Accessories, Accessories set and cistern fittings, with specials of
standard make and mosquito proof coupling of approved design complete, cutting
and making good the floors wherever required including Jet spray as directed by
Engineer-in-charge.
21 Providing and fixing of first quality white vitreous china Table Top basin type wash 1.00 No. 13949.11
basin as per product detail, including filling gap between counter and wash basin
with approved sanitary grade material, cutting and making good the walls where
required to the complete satisfaction of the Engineer in charge including oval wash
basin, rag bolts for wash basins, bottle trap, waste coupling, prismatic pillar cock.
Size 410 x 410 x 155mm.
22 Providing and fixing full turn brass bib tap (Jaquar CON-047KN or equivalent) 1.00 No. 3019.90
with wall flange in polished chrome of approved quality and conforming to
manufacturers standards as directed by Engineer in charge.
23 Providing and fixing PVC louver sheet panelling as per interior design pattern to 29.63 Sq.m. 5154.03
be fixed on Aluminium panel of size 50 x 25 mm as per required pattern for wall with
necessary fixtures and fasteners including labour and neat smooth finishing in line
and level etc. complete.
24 WALL PANELING WITH VINEER 41.19 Sq.m. 6323.85
Providing & fixing Wooden wall panelling using 12 mm thick plywood fixed on
Aluminium panels of size 50 x 25 mm. The plywood is covered with decorative
Veneer all veneered surfaces finished with melamine polish remaining all details as
directed by consultant.
It. Description of Item Qty. Unit Rates in Total
No. Figure Amount
25 Providing and fixing 12 mm thick Gypsum board false ceiling as per interior 80.95 Sq.m. 1119.08
design pattern using Gypsum board sheet fixed with galvanised skelton with
necessary fixtures and fasterners including neat smooth finishing in line and level
26 PARTITION WITH VINEER 32.55 Sq.m. 11320.04
Providing & fixing Wooden wall panelling using 12 mm thick plywood fixed on
Aluminium panels of size 50 x 25 mm. The plywood is covered with decorative
Veneer. all veneered surfaces finished with melamine polish remaining all details as
directed by EIC.
27 Providing and fixing office table made from 18mm thick MR Grade plywood with 1.00 No. 21411.50
1mm thick premium laminate finish work top, Table under structure made from
mm thick MR grade plywood with 1mm thick decorative laminate sheet. Table all
edges covered with C.P. teakwood beading and all beading will process from klin
dried process. Table top with 36 mm thickness and legs with 36 mm thickness.
Table top edges with teakwood beading. Teakwood borders with melamine polish.
Complete as directed by architect and engineer in charge. Table Size : 2100 x
28 Providing and fixing office table made from 18mm thick MR Grade plywood with 2.00 No. 14337.02
1mm thick premium laminate finish work top, Table under structure made from
mm thick MR grade plywood with 1mm thick decorative laminate sheet. Table all
edges covered with C.P. teakwood beading and all beading will process from klin
dried process. Table top with 36 mm thickness on front and back side offset with
remaining top with 18 mm thickness and legs with 36 mm thickness on front and
back with 18 mm thickness. Table top edges with teakwood beading. Teakwood
borders with melamine polish. Complete as directed by architect and engineer in
charge. Table Size : 1800 x 900 x
29 Providing and fixing office table made from 18mm thick MR Grade plywood with 5.00 No. 12864.77
1mm thick premium laminate finish work top, Table under structure made from
mm thick MR grade plywood with 1mm thick decorative laminate sheet. Table all
edges covered with C.P. teakwood beading and all beading will process from klin
dried process. Table top with 36 mm thickness on front and back side offset with
remaining top with 18 mm thickness and legs with 36 mm thickness on front and
back with 18 mm thickness. Table top edges with teakwood beading. Teakwood
borders with melamine polish. Complete as directed by architect and engineer in
charge. Table Size : 1500 x 900 x
30 DRAWER PEDESTAL IN LAMINATE FINISH 5.00 No. 7052.65
Providing and fixing one drawer pedestal made from 18 mm thick MR grade
plywood with 1mm thick premium quality laminate finish. Pedestal inside drawer
slides on premium quality telescopic channels with standard locking system.
Drawers with inside 1mm thick laminate and all surfaces finish with PVC edge
beading complete. Drawers with premium quality SS handles. All plywood surfaces
are covered with laminate finish 2mm thick PVC beading. Complete as directed by
architect and engineer in charge. Size : 450 x 600 x
31 Providing and laying machine cut, free edges, pre mirror polished Granite Stone 23.68 Sq.m. 2755.28
slab 18 mm thick for Doors & windows sill, jambs & cladding as per design
including full moulded round front edge and 1cm nosing on 15 mm thick cement
mortar 1:3 (1 cement : 3 coarse sand) jointed with grey cement slurry including
rubbing, polishing & finishing etc. complete.
32 Providing and fixing safety grills of required pattern for windows / Ventilator / Door 1105.00 Kg. 109.08
using M.S polished bars / pipes / M.S. angles / flats of size and at required spacing
as per drawings as per design and hold fasting with coach bolts including one coat
of primer and two coats of matt finished oil painting etc. complete.
It. Description of Item Qty. Unit Rates in Total
No. Figure Amount
33 Providing and fixing window having extruded aluminum colour powder coated 43.52 Sq.m. 1591.87
section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,
horizontal three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07
Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm, @ Wt. 1.06 Kg/mt with
sliding shutters of horizontal member size 40 mm x 18mm x 1.29mm @ wt.of
Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456 Kg/mt with
5 mm thick transparent bronze colour tinted float glass with powder coated
aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame
as per details etc.
34 Providing and fixing standard extruded of alluminium section of size 63mm x 0.30 Sq.m. 1175.56
38.10mm x 1.2 mm (@ wt. 0.643 kg/Rmt.) with colour anodized alluminium frame
for ventilation with 5mm thick frosted glass as details etc. complete for ventilation.
35 Constructing Sand witch platform of 15mm - 18mm thick polished black Granite at 1.05 Sq.m. 6263.88
top and 25 mm thick Kota stone slab one side polished at bottom with cementing
materials / adhesives including making necessary grooves in walls with vertical
sandwich two Kota stone 25 mm support every 60 cm centre to centre covered with
granite patti or as required including all labour material of approved quality including
full moulded round front edge granite strip of one side polished and jointed with grey
cement slurry including rubbing and polishing etc. complete.
36 Providing and fixing door having side hung single shutter/double leaf having 11.66 Sq.m. 4965.16
premium quality of factory made 35 mm thick solid core flush door finished with
mm thick veneer on both side with 6 Lever Mortice lock ,SS Aldrop, SS Handle size
15 cm long, Tower Bolt size 20 cm, Door closer etc. as per detail colour & pattern
approved by this office including necessary anodized alluminum fixtures and
37 Providing and fixing door having side hung single shutter/double leaf having 2.31 Sq.m. 3441.07
premium quality of factory made 35 mm thick solid core flush door finished with
mm laminated sheet on both side with 6 Lever Mortice lock, SS Aldrop, SS handle
size 15 cm long, tower bolt size 20 cm etc. as per detail colour & pattern approved
by this office including necessary anodized alluminum fixtures and fastenings.
38 THREE SEATER SOFA SET 1.00 No. 28785.00
Made from teak wood structure, wood size must be 2” x 2” clear size, 19mm thick
MR grade ply will be used for structure, Ply must be used of ISI Mark, Sofa set
cushion must be in 40 density poly urithin material in seat and back, Poly urithin
must be used of ISI mark and with the IS standards Polyurithin must be joints with
the standard gluent and necessary hardware. Sofa covered with standard tepestry
with the cotton base and joints with double stitching, Sofa cushion as per IS
standard and with ISI mark required on the polyurithin foam, cushion covered with
standard tapestry of sanil and make of sanil as per standards and fabric quality also
standard brand. Sofa seating depth must be 22” from the back, back height must be
21” from seat in seat 5” polyurithin thickness required and in back 4” polyurithin
thickness required. Base made from SS 304 with mett finish buffing and 6mm thick
rubber layer in the base, Recron must be used in back and seat for the softness.
Sofa handel made from plywood box and inside seasoned wood support, handle
covered with 40 density polyurithin and
with the layer of recron and covered with standard tapestry complete
as per drawing given by architect & direction given by Engineer in charge.
It. Description of Item Qty. Unit Rates in Total
No. Figure Amount
39 TWO SEATER SOFA SET 1.00 No. 22725.00
Made from teak wood structure, wood size must be 2” x 2” clear size, 19mm thick
MR grade ply will be used for structure, Ply must be used of ISI Mark, Sofa set
cushion must be in 40 density poly urithin material in seat and back , Poly urithin
must be used of ISI mark and with the IS standards Polyurithin must be joints with
the standard gluent and necessary hardware. Sofa covered with standard tepestry
with the cotton base and joints with double stitching, Sofa cushion as per IS
standard and with ISI mark required on the polyurithin foam, cushion covered with
standard tapestry of sanil and make of sanil as per standards and fabric quality also
standard brand. Sofa seating depth must be 22” from the back, back height must be
21” from seat in seat 5” polyurithin thickness required and in back 4” polyurithin
thickness required. Base made from SS 304 with mett finish buffing and 6mm thick
rubber layer in the base, Recron must be used in back and seat for the softness.
Sofa handel made from plywood box and inside seasoned wood support, handle
covered with 40 density polyurithin and
with the layer of recron and covered with standard tapestry complete
as per drawing given by architect & direction given by Engineer in charge.
40 ONE SEATER SOFA SET 1.00 No. 14443.00
Made from teak wood structure, wood size must be 2” x 2” clear size, 19mm thick
MR grade ply will be used for structure, Ply must be used of ISI Mark, Sofa set
cushion must be in 40 density poly urithin material in seat and back , Poly urithin
must be used of ISI mark and with the IS standards Polyurithin must be joints with
the standard gluent and necessary hardware. Sofa covered with standard tepestry
with the cotton base and joints with double stitching, Sofa cushion as per IS
standard and with ISI mark required on the polyurithin foam, cushion covered with
standard tapestry of sanil and make of sanil as per standards and fabric quality also
standard brand. Sofa seating depth must be 22” from the back, back height must be
21” from seat in seat 5” polyurithin thickness required and in back 4” polyurithin
thickness required. Base made from SS 304 with mett finish buffing and 6mm thick
rubber layer in the base, Recron must be used in back and seat for the softness.
Sofa handel made from plywood box and inside seasoned wood support, handle
covered with 40 density polyurithin and
with the layer of recron and covered with standard tapestry complete
as per drawing given by architect & direction given by Engineer in charge.
41 CENTER TABLE 1.00 No. 10605.00
Solid wood Center table, Made from teakwood with chemical treatment, Wood
must be seasoned and passed out from chemical treatment, Center table with four
nos solid wooden legs and table top with 12mm thick clear toughened glass / 4mm
thick veneer finish top with 19mm thick BWP plywood, Table all wooden part finish
with melamine polish. Table having one no0 of shelves and properly fixed with
wooden legs etc. complete as per drawing given by architect & direction given by
Engineer in charge.
42 ROLLER BLINDS 20.48 Sq.m. 3033.03
Providing and fixing the premium quality roller blinds with sunscreen & blackout
layer of approved colour, design, size etc. The Duplex blind shall not filters the light
into the room. The blind shall operated via a chain system, alternate strip of dim out
& sheer fabrics shall be aligned to create a full sheer blind. The roller blind shall be
installed on brackets & clamps fixed over the wall or ceiling. The brackets & clamps
shall be made up of high strength alloy or zinc plated mild steel Including all
material, fixtures, screw, nails, labour etc. complete as directed by Engineer
It. Description of Item Qty. Unit Rates in Total
No. Figure Amount
43 Construction Septic tank inside dimention of 1.2 m in length & 0.9 m in width & 3 m 1.00 No. 33981.45
depth including excavating any type of soil as shown and mentioned in the drawing,
providing and laying 0.10 m thick plain cement concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone agg.) 40 mm thick IPS flooring at bottom with brick masonary
0.23 m thick walls C.M. 1:5 (1 cement : 5 coarse sand) and intermediate partition
C.M. 1:4 & RCC top slabs 12 cms thick in 1:2:4 (1 cement : 2 coarse sand :
graded stone agg) including reinforcement as per design and 15 mm thick cement
plaster in C.M. 1:4 with floating coat of neat cement slurry inside, top and around
tank below 15 cm on ground level, Also provide two nos C.I. Manhole frame and
cover of size 60 cm x 45 cm & 75 mm dia. PVC 6 kgf/Sq cm pressure air vent pipe
in 3.00 length with cowl etc. complete as per direction of Engineer in charge.
44 Providing and constructing SOAK WELL of 1.0 m internal dia and 2.5 m depth 1.00 No. 22111.93
internal clear dimension including the cost of excavation, PCC 1:4:8 foundation for
honey combed masonary in C.M. 1:4 (1 cement : 4 sand), casting R.C.C. 1:2:4 (1
cement : 2 sand : 4 graded stone aggregate 20mm nominal size) top slab 12 thick
with C.I. manhole cover 600mm x 450mm size of 35 kg. weight and 75mm dia C.I.
pipe 1800mm long with 75mm dia. cowel vent and filling the wall 1000mm in depth
with dry brick bats including providing vata in C.M. 1:3 (1 cement : 3 sand), curing
including cost of reinforcement etc. complete as per detailed drawing and directed
45 Removing dry or oil bound distemper by a washing and scraping and sand 345.56 Sq.m. 10.99
papering the wall surface smooth including necessary repairs to scratches
46 Wall painting (two coats) with plastic emulsion paint of approved brand and 426.50 Sq.m. 119.49
manufacture on undecorated wall surface to give an even shade including throughly
brushing the surface free from mortar droppings and other foreign matter and sand
papered smooth including applying two coats of Birla (white cement based) or
Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand
and manufacture on new wall surface to give an even shade including thoroughly
brushing the surface free from mortar dropping and other foreign matter and sand
papered smooth.
47 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded 0.60 Cum 3444.10
stone aggregates 20 mm. nominal size) and curing complete including cost of form
work in foundation and plinth including mixing of water proofing material in C.C.
in mix proportion etc. complete as directed by engineer in charge.
i.e. Rs. Seventeen lacs Fourty Six thousand One hundred Fifty Nine and Ninety Seven paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
It. Description of Item Qty. Unit Rates in Total
No. Figure Amount
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017
Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as
per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item
at the rate of input rate mentioned in all the tender.
5. The Contractor will have to submit the all required mix design at his own cost before execution as directed
and to be approved from the Engineer in charge.
6. Credit for dismantalled materials of amount of Rs. 2072.00 must be recovered from 1st R.A. bill of
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found
Executive Engineer
R & B Division,
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
NIVIDA.pdf
STD SPECI.pdf
BOQ.pdf
SBD.pdf
SCH OF TEST.pdf
SPECI.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .