WELCOME MAINT TO MD ACCN AT MIL STN DHARAMSHALA

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.

Taking down shutter of any description not exc 1 sq.m complete all as specified and directed.

Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each. complete all as specified and directed.

Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each and refixing in same opening after easing and adjusting complete all as specified and directed.

M&L 2nd class hard wood, plain solid,straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put to gether with glue pinned at joints as specified and directed

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer, complete all as specified and directed.

S&F factory made Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

M&L PCC 1:3:6 type C0 (using 12.50mm graded crushed stone aggregate) as in steel door frames complete all as specified and directed.

S&F 35mm thick, 1st class soft wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F 25mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F aluminium anodised door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F aluminium anodised window and ventilator shutters side hing type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long, hinges 100mm long, suitable handle complete all as specified and directed.

S&F solid PVC frame (angle rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth oter integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as shown on page No. 176 to 183 of MES SSR Part-II complete all as specified and directed. Note: Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supply anf fixing in the frame at site, as per specification complete all as specified & directed.

S&F factory made steel window with side hung shutters including projecting type hinges with steel handle, steel peg stay,complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F steel ventilators with centre hung shutter including two pairs of brass cup pivoted catch spring and pulley wheel complete all as specified and directed.

S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F300 mm size anodized aluminium alloy sliding door bolt, bolt type, stove enamelled black, with bright bolt not less than 16mm dia, with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on stapple plate complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in squares n exc. 0.5 sq.m in each pane complete all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc. 0.50 sq.m in each pane, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L preparing new surface of steel of any description, over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

S&F soap dish vitreous china white,approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs toilet paper holder recessed type stainless steel complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed.

S&F glass/PTMT shelf with CP railing fancy type complete all as specified and directed.

S&F glass/PTMT corner shelf with CP railing fancy type complete all as specified and directed.

S&F, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer in Charge.

S&F stop valve/angle valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed by Engineer in Charge.

S&F brass chromium plated shower roses of size 125 mm with arms and with or without swivel joints, including fixing to steel pipe or union complete all as specified & directed by Engineer in Charge.

S&F 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with long shank and cup (concealed type) screwed both ends for iron pipe or union complete all as specified and directed.

S&F sink with drainage made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel plate racks of 900mmx600mmx250mm having thickness of SS strip 1mm, fixed on wall etc complete all as specified and directed.

S&F health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S&F in repairs 15mm bore, brass CP central hole basin mixer for mxing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F CP brass hot & cold 15mm dia wall mixture for mixing hold & cold water with connecting legs & flengs complete all as specified and directed.

S&F vitreous china wash basin, angle back, size 600x480mm white, including cutting for and pinning in ends of brackets or erecting stand including 15mm pillar taps, with 32mm chromium plated waste coupling, waste pipe of bore 32mm, PVC connection pipe 450mm long with brass nuts on both ends, fixed in repairs, including brackets complete all as specified and directed.

S&F vitreous china squatting pan water closet, orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVC (SWR) 'S' trap,setting trap and pan in lime concrete and jointing to flush pipe (fixed in repair) and making good disturbed surfaces of floor and match with existing floor, complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern0, white and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc seat and cover for pedestal pan, health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F PVC valve less, crystal white, syphonic action type flushing cistern 10 litre capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450mm long PVC connection with CP brass couplings nuts and PVC washers at both ends fixed in repairs complete all as specified and directed.

S&F vitreous china premium wash down water closet wall hung EWC white/ivory/off white (closed pattern) incl all necessary accessories like rag bolts/get gasket, seat cover for pedestal pan, health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs CP grating (with or without waste hole), 125mm sizse, fixed on floor/nahani traps etc. complete all as specified and directed.

S&F 140mm long floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring complete all as specified and directed.

S&F aluminium body door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutter of wt. between 36 to 60 kg complete all as specified and directed.

Taking down rain water pipe and eaves gutters (any size and pattern), including all fittings heads, shoes bends swan necks etc complete all as specified and directed.

S&F in repairs PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F in repairs 110mm bore PVC (SWR) bends of any radious complete all as specified and directed.

S&F in repairs PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F in repairs PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, laid in floor or in trenches complete all as specified and directed

S&F in repairs 75mm bore PVC (SWR) bends of any radious complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and directed by Engineer in Charge.

Dismantling water tanks and removing to store exc 250 & not exc 500 ltr capacity complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed.

S&F 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI tubing complete all as specified and directed.

Dismantling of wall & ceiling boards (fiber, pulp, insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets complete all as specified and directed.

S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS: 14862) of size 595x595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120gms, both side insclusive) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.30mm sheet and cross T at 600mm c/c to form a grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main T runnbers to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin etc with galvanised butterfly level clips, spaced at 1200mm c/c along main T, bottom exposed width of 15mm of all T-sections shall be centra back pre-painted with polyester paint and having a load bearing capacity of 12kg/sqm and refixed all existing electric wiring and fixture comlpete at all heights as per direction of Engineer-in-Charge.

M & L second class hard-wood plain fillets square, rectangular or triangular in section, clean sawn area exc. 3 sq.cm but not exc.6 sq.cm secured with nails or brads complete all as specified & directed.

M&L 4mm thick non asbestos fibre cement decorative type building boards fixed to timber frame/GI/aluminium frame work fixed with nails as in ceiling flat or sloping complete as specified and directed.

S&F Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specifications complete all as specified and directed

S&F 16/18mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work as cup board shutter complete all as specified and directed.

S&F 30 mm size (Width of flaps when open) continuous paino hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engineer-in-charge.

S&F 100mm size, hasp and staple safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

Dismantling timber scantlings 40Sq.cm and over in section, in any position complete all as specified and directed.

M&L Second class hard wood timber in scantlings, clean sawn, fixed complete as specified and directed.

S&F mild steel work as in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillet (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe-290 E-165 complete all as specified and directed.

Dismantling of old rusted plain or corrugated steel sheeting, any gauge, thickness,including Nainital or similar pattern roof covering etc. complete all as specified and as directed.

S&F 0.63mm Galvanised,corrugated mild steel sheeting with two corrugations side lap,fixed with L-type or J-type or cranked hook bolts and washers in roofs,walls etc. with grade of zinc coating 275 complete all as specified and directed.

All as per srl item No. 78 here-in-above but except sheet.

S&F 0.63 mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips valley gutters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

All as per srl item No. 80 here-in-above but except sheet.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified, compete all as specified and directed. (Colour as approved by GE)

All as per srl item No. 82 here-in-above but except sheet (any thickness).

M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified. (Colour as approved by GE)

All as per srl item No. 84 here-in-above but except sheet (any thickness).

M&L marble work (Udaipur green slabs) 16 to 18mm thick (table rubbed and polished) as in cooking platforms and like in CM 1:4 in pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in filling in sunken floors etc. complete all as specified and directed.

M&L rendering 20mm thick plaster in CM 1:4 finished the surface even and smooth mixed with water proofing compound complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.)

Supply only liquid water proofing compound complete all as specified and directed by Engineer in Charge.

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in floors finished the surface even and rough to receive floor finishes complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding or backing coat, removing rubbish off the premises, removal and depositing where directed and leaving the work clear of any plastering complete all as specified and directed .

M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm cut to size as required as in skirting/dado over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.

M&L joint free coloured glazed ceramic tiles in vertical surfaces350x450x7mm,450 x 300x 7mm/ 600 x 300 x 7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Refixing only old GI tubing 15mm bore pipe and connections in new or old position as on walls, ceiling, floors etc. complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specifed and directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Refixing only old GI tubing 20mm bore pipe and connections in new or old position as on walls, ceiling, floors etc. complete all as specified and directed.

Cutting chase, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing,steps, cills, sunshades, shelves,lintels,etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc. 10cm girth complete all as specified and directed.

PVC coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door / windows, (Each opening n.exc. 1.50 mtr, contained with a pair of clamps and a pair of side ornamental attachments), complete all as specified & directed by Engineer in Charge.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.

M&L walling of random rubble stone masonry uncoursed, brought upto course with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

All as per srl item No. 109 here-in-above but except stone.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.

M&L rendering 15mm thick plaster in CM 1:4 on stone masonry surfaces or other than fair faces of brick surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surface finished the surface even and fair without using extra cement complete all as specified and directed.

M&L rendering 10mm thick plaster in CM 1:3 as in celing, facia roof projection etc finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered wall surfaces and applying two coats of cement base paint including preparation of surfaces complete all as specified and directed.

M&L preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whitening preparatory to distempering including preparation of surfaces complete all as specified and directed.

M&L preparation of newly plastered surface of wall and applying two coats of white wash including preparation of surface of wall complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, benching cills, PCC gola, roof kerbs and the like inculding weathering slightly rounded or chamfered on edges mixed with water proofing compound complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection complete all as specified and directed.

M&L 100mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L colour chequered cement concrete tiles, machine pressed, factory made of size 300x300x25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, ever and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L machine cut kota stone slab flooring 16-18mm thick over screed base laid over 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per srl item No. 122 here-in-above but on vertical surfaces over 10mm thick plaster in CM 1:4

M&L mirror polishing on marble/granite/kota stone/terrazzo floor work wherever required finishing complete all as specified and directed.

M&L preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on roof complete all as specified and directed.

M&L preparation of old plastered or unplastered wall surfaces including cleaning by brooming down or with steel wire brushing, scrapping down smoke spot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.

All as per srl item No. 126 here-in-above but one coat of white wash on ceiling.

M&L preparation of old decorated plastered or unplastered wall surfaces including cleaning by brooming down or with steel wire brushing, scrapping down smoke spot, moulds, moss and efflorescent slats and treating oil and greasy spots etc. and applying one coats of distemper oil emulsion on wall complete all as specified and directed.

All as per srl item No. 128 here-in-above but two coats of oil bound distemper on walls.

M&L preparation of surfaces of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new/old surfaces complete all as specified and directed.

M&L preparation of old plastered wall surfaces and applying two coats of cement base paint including preparation of surfaces complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description and otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Make: Asian paint apcolite premium satin enamel

M&L preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Make: Asian paint apcolite rust shield.

Krithvik Electricals (BID ID -3402069)