PROVISION OF WALL PANELLING AND CONNECTED WORKS AT BUILDING P-1A AT ICGS BEYPORE

Supply and fixing of 3 mm thick fire-retardant ACP panels (PVDF-coated, FR core), with 50 mm x 50 mm x 2 mm anodized aluminium framework, stainless steel fasteners, fire-rated sealant, aluminium trims, access panels with hinges and catches as in ceiling and walls complete all as specified and as directed.

Supply and fixing suspended gypsum board false ceiling using 12.5 mm thick tapered edge gypsum boards conforming to IS:2095-1982, screw-fixed to G.I. ceiling framework comprising perimeter channels (0.55 mm thick) fixed to walls with nylon sleeves and screws, intermediate channels (45 mm x 0.9 mm thick) suspended from soffit at 1220 mm centers using ceiling angles and steel expansion fasteners, and ceiling sections (51.5 mm web with 26 mm flanges) fixed perpendicular to intermediate channels using connecting clips. Boards shall be mechanically screw-fixed with 25 mm drywall screws at 230 mm centers. All joints and tapered edges shall be finished flush using jointing compound, paper/fiber tape, and two coats of topcoat as per manufacturer’s specifications. The entire ceiling surface shall be finished with one coats of primer, followed by two coats of wall putty in 3 mm and two coats of plastic emulsion paint of approved shade to achieve a smooth, uniform finish complete all as specified and as directed

Supply and fixing of 12 mm thick fire-retardant plywood wall panelling (BWP) grade, compliant with IS 5509 with 1 mm laminate finish, with 50 mm x 50 mm x 2 mm anodized aluminium framework, stainless steel fasteners, fire-rated sealant, aluminium trims, access panels with hinges and catches, including transportation and cleanup complete all as specified and as directed

The contractor shall supply, fabricate, and install not less than 7 mm thick fire-retardant PVC wall panelling (compliant with IS 14862 or equivalent, e.g., Class B1 per EN 13501-1) for aesthetic enhancement of passage corridors in the building. The PVC panels, sourced from reputed makes such as Sintex, Alstone, or Eurobond, shall feature a high-quality finish (e.g., matte, gloss, wood grain, or textured, as per architect’s approved sample) to elevate the interior’s visual appeal. The panelling shall be supported by a 50 mm x 50 mm x 2 mm anodized aluminium framework (grade 6063-T6, e.g., Jindal Aluminium or Hindalco), secured with stainless steel fasteners (grade 304), fire-rated silicone sealant (e.g., Dow Corning or Anabond), and aluminium trims for edges and corners to ensure a seamless and polished look. Optional access panels (600 mm x 600 mm) with concealed hinges and magnetic catches may be included if specified for maintenance or future utility access, ensuring compliance with fire safety norms (NBC 2016) complete all as specified and as directed

Material and Labour arresting seepage in old external wall by surface preparation (jet washing, crack chasing), repairing defects with polymer mortar, applying 2 coats of acrylic elastomeric waterproofing membrane (1-2 mm DFT, e.g., Dr. Fixit equivalent), embedding mesh, and finishing with 2 coats of exterior acrylic paint. Includes tests, guarantee for 2 years, and all leads/lifts up to 3 floors. Measured on external surface area complete all as specified and as directed.

Pressure grouting for cracks using epoxy/polyurethane injection (including drilling, packers, and sealing). Scope of Work 1. Method of Repair cracks (>0.2 mm width) in old external walls to prevent water seepage to internal walls. 2. Use pressure injection grouting with epoxy like Sika Injection-201, Fosroc Conbextra EP10) equelent or polyurethane resin like Sika Injection-307, Fosroc Lokfix PU or equelent to fill and seal cracks, voids, and honeycombs. Include drilling injection ports, installing packers, injecting grout, and sealing ports. 3. Ensure a water-tight seal with a 2 year guarantee against seepage recurrence, subject to maintenance. 4. Work to be performed by a specialized agency with 5+ years of experience in injection grouting, under engineer supervision.

Taking down chowkhats or frame with shuters (without taking shutter from frame) exc 1.5 sqm and n. exc 4.0 sqm and removing from site complete all as specified and as directed

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including hold fasts and PCC block complete all as specified and as directed

M&L II nd Class teak wood Plain, solid, straight chowkats an frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face prelaminated decorataves panels, commercial type on both sides complete all as specified.

S & F 35 mm thick II class HW Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; as per section 8.28 (a) sizes of me-mbers of shutters as specified .

S & F Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either sides and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rail with suitable PVC sheet beading and jointed together the solvent cement supplying & fixing in the frame at site as per specification and drawings complete.

S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including takig down old un servicable one complete all as specified and as directed.

M&L 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L 5 mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Stainless Steel 75 mm Butt Hinges grade 304, fixed to chowkhat all as specified and as directed by Engineer-In-Charge.

S&F Stainless Steel 100 mm Butt Hinges grade 304, fixed to chowkhat all as specified and as directed by Engineer-In-Charge.

S & F Stainless Steel Tower Bolt 150 mm long grade 304 all as specified and as directed by Engineer-In-Charge.

S&F 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface all as directed and as specified

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutter wire gauge) with frame, glazed with 5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing of Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all three shutter, PVC roller etc all as specified below, including taking down old window and making good jambs, cill, ceiling with 10mm thick plaster in CM (1:4) and applying two coat of Oil bound distumper over a coat of wall care putty complete all as specified and directed including taking down old unservicable one (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.20 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.20 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.19 (Section No 21455) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.19 (Section No 21454) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.29 (Section No 20844). Make Jindal/Hindalco/Nalco

S&F aluminium ventilator (powder coated with approved colour) partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.20 mm thick, half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed including taking down old unservicable one

M&L preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed by Engineer-in-Charge.

Grinding the existing paint or putty from the wall using a mechanical grinder or wire brush. Remove all loose and deleterious matter and dust. Fill the cracks with Fosroc PU 50 Sealent. Provide and apply two coats of Fosroc Nitoproof Damprotect, a high-performance two-component elastomeric cementitious damp-proof coating complete all as specified and as directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed.

M&L for plastering 10 mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) all as specified and directed .

M/L cement plaster 5mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified.

M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in C M 1:4 with finished even and smooth (without using extra lime or cement)

M & L for preparation of new plastered/concrete surfaces of walls, providing 3 mm thick Birla white wall care putty in 2 coats to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint with make Asian royal Series and equalent over a coat of compatiable priming paint complete all as specified.

M & L Preparation of new ceiling surfaces including washing, rubbing down and stopping by brooming down, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil distemper emulsion on wall surfaces over one coat of primer over 3 mm thick Birla white wall care putty in 2 coats to achieve smooth surfaces complete all as specified.

M & L for preparation of new plastered/concrete surfaces of walls, applying two coats of exterior grade acrylic emulsion paint of approved shade/tint with make Asian Apex Series and equalent over a coat of compatiable priming paint complete all as specified.

M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil distemper emulsion of premium quality asian apex ultima or equealent on wall surfaces complete all as specified.

M&L preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed by Engineer-in-Charge.

M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil distemper emulsion on ceiling surfaces complete all as specified.

S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete all as specified and as directed.

S&F in repairs 32/40 mm dia of discharge pipe Waste coupling of CP for urinals/ WHB/Sink etc. complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .

S&F in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and aluminised hinging device complete all as specified and directed.

S&F in repairs Bib tap cast copper alloy CP , with capstan handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete, all as specified.

S&F in repairs Angle valve CP cast copper alloy, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete, all as specified.

S&F in repairs Stop valve cast copper alloy, screwed down high pressure with capstan handle, screwed both ends for 15 mm bore iron pipe or for unions and fixed, complete all as specified.

Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.

S&F in repair.Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed..

S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified.

S&F in repairs Pillars taps, 15mm dia bore cast copper alloy with capstan heads, CP fency type screwed down high pressure with or without lettered'Hot' or cold with long screwed shanks and ly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Material and Labour for Mangalore pattern roofing tile of any direction and in any position laid with cement mortat 1:6 over top of RCC roofing including necessary budding/ filleting and 2 coats of exterior emulsion paint complete all as specified including taking down old damaged tiles of any place and in any postion/ direction complete all as specified and as directed.

Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints ,fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends110mm complete all as specified and as directed

S&F PVC 110 mm drop end suitable for 110mm half round PVD rain water valley gutter complete all as specified and as directed

S&F PVC 110 mm stop end suitable for 110mm half round PVD rain water valley gutter complete all as specified and as directed

M&L stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays , including bolts and nuts and securung ends of stays to walls or roofs bore of pipe 50 mm for 110 mm pipe complete all as specified and as directed.

Taking out and stripping old tarfelt over roofs, prapets walls of any description an in any direction including cement plastering and removing the rubbish n.exe 1.50 KM etc coplete including removing the debrish outside MD land complete all as specified and as directed. Cleaning the surface with wirebrush. Cut open the tile gap and removing the existing jontfiller and fill the same with fosroc conbextra gp2 . Providing and applying one coat of Sika shield primer S-30. After primer dries providing And Laying of SIKA 4mm Thick app modified polyster reinforced bituminous membrane superior waterproofing,.The Membrane should be sealed properly at joints maintaining 75mm Overlap between the membrane selvedge &100mm overlap on the End joints of the membrane over the surface etc. Providing and applying of aluminium paint for membrane protection.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises all as specified

M&L for light shade vitrified ceramic tiles 8-10 mm thick polished area of each tiles not exc 0.36 sqm but n. exc 0.42 Sqm, of any shade and any pattern (Pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in colored cement to match coloured tiles..(The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.

All as per item No59 above but in vertical surfaces like skiting / dado etc all as specified and directed ..(The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.

Non skid coloured glazed ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm to 8-10mm thick, over and including 15mm thick screed bed in CM 1:6 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles..(The Colour,shade and pattern shall be approved by the GE during execution work). (No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work)

M&L for glazed ceramic Coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.

M & L For Pre-cast cement concrte block masonry with solid blocks Type C1 1:3:6 ( 20 mm gradd aggregate), exc.10 cm in widht and setting in CM 1:6.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down of Split type Air Conditioner of any capacity 1.5/2 TR from existing location incl removal of outdoor unit by opening all electrical connection and suction & discharge line connection carefully & removing materials to store for keeping in safe custody for reuse at site. Filling the opening of old location with cement mortor, applying white wash on wall with matching with existing colour of the site. Refixing, installation of Split type Air Conditioner of any capacity 1.5/2 TR by filling of refrigerent, fixing of new bracket for installation of outdoor unit, fixing of suction and discharge copper tubes with replacement of insulation of suction & discharge line and making holes for passing of suction & discharge line through brick wall incl well finish with cement mortor, applying white wash, colour wash, distemper etc on wall to match with existing colour of the adjacent surface at new location, etc. complete all as specified and directed.

Taking down the heat/smoke detectors from existing location and refixing of heat/smoke detectors on false ceiling by extending armoured copper cable 2 x 1.5 sq.mm. up to a length of 1.5 Mtr after compeletion of false ceiling including testing and checking of fire alarm system complete after refixing of all heat/smoke detectors complete all as directed.

(b) One 3 pin socket outlet 6 Amps on Independent board

All as per ser item No.68 but with 4 sq mm PVC insulated copper conductor incl 4 sq mm PVC copper conductor used as earth wire for power point/AC point on independent board

Supply and fixing of Modular switch, one way, 6 Amps complete all as specified and directed.

Supply and fixing of Modular socket outlet, 6 Amps, 2/3 pin, 2 module combined complete all as specified and directed.

Supply and fix in replacement of Switch Socket Combination 2 in 1, 5 Amps /16 Amps flush type Complete all as specified and directed.

Supply and fixing single pole and neutral enclouser with a two pin and earth plug and socket complete with one MCB single pole 20 Amps complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing Triple pole and neutral (TPN) 100 AMP 415V 10KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral 100 Amp current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing of Triple pole & neutral, double door, 8 way metallic modular distribution board confrming to IEC 61439-3, suitable for flush/surface mounting with provision for FP RCCB /RCBO /Isolator /MCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 Amps rated copper bus bar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet etc. having IK 09 & IP 43 protection complete all as specified and directed .

Supply and fixing sheet metal enclosure distribution board (DB),when MCB to be used, dust and vermin proof, Single pole and neutral (SPN) 8 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed.

Sub main wiring with 2 runs of 4 sqmm single core, multistranded PVC insulated unsheathed cable 1100 volts grade with copper conductor with 1 runs of 4 sqmm (1X4 Sqmm) PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly, drawn in to and including PVC casing and caping incl all accessories as bend,tee, junction boxes elbows etc. complete all as specified and directed. Note : 2 runs of cable, 1 run of earth wire and one run of casing and caping shall be measured as one length. all as specified and directed.

Sub main wiring with 4 runs of 6 sqmm single core, multistranded PVC insulated unsheathed cable 1100 volts grade with copper conductor with 2 runs of 6 sqmm (2X6 Sqmm) PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly, drawn in to and including PVC casing and caping incl all accessories as bend, tee, junction boxes elbows etc. complete all as specified and directed. Note : 4 runs of cable, 2 run of earth wire and one run of casing and caping shall be measured as one length. all as specified and directed.

Schedule of Credit (Minus) Rs.6489.00 NOTE: Bidder shall insert credit amount of Rs. 6489.00 as rate in Green field under Col-13.

Please Enable Macros to View BoQ information