8121/SAR-54/E8 ADDN/ALTN AND ALLIED WORKS TO BLDG NO T-22/11 AND 12, PROVN OF MONKEY PROOFING AND ALLIED WORKS IN MAP ACCN AND STANBY HT SUPPLY LINE FOR CPSS SUB STATION AND AT 1 AFSB DEHRADUN UNDER GE (AF) SARSAWA

Amount

Supply and fixing anodized aluminum grill made of 6mm dia aluminium bars, size of mesh 50mm by 50mm fixed together with aluminium flat 50mm x 1.90mm thick for aluminium window frame complete all as specified and as directed.

Supply and fixing aluminium anodized powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilaors & partiton for fixing glass, wire mess with one or more rebates including jointing cleat for fixing etc complete including packing with rubber gasket, standard aluminium beading etc around both sides as required complete all as specified and directed.

S & F Anodised aluminium door shutters powder coated (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specifiedand directed.

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by the Engineer-in-Charge.

S&F mild steel work as in doors or gates of angle or other section with gusset plates, rails, braces,etc complete, drilled for fixing of steel sheeting or other covering. Door,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, aslo fastening and fixing, Fe-410W(Gde-E-250) quality B complete all as specified and directed.

S&F MS butt hinges 100mm long medium weight cold rolled complete all as specified and directed.

S & F mild steel rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc. quality confirming to Fe-290 (GDE E-165) complete all as specified and as directed by the Engineer-in-Charge

S & F mild steel work in tubular trusses,purlis and tubular posts a including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm but not exc 20cm girth in brick walls complete all as specified and as directed by the Engineer-in-Charge

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and direcetd

S&F Welded Steel wire fabric N.exec 4Kg complete all as specified and directed

M&L for preparation of new steel surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specified and direcetd

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.50 Sqm but n. Exc 4sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube fixed in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of rudraksha colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed.

S&F, Aluminium anodised barrel tower bolts, 150mm long , of extruded section and fixed complete all as specified and direcetd.

S & F stainless steel butt hinges 100mm size incl all neccessary hinge pins etc complete all as specified and direcetd.

S&F aluminium bow handle "D" type anodized 150mm long complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc omplete all as specified and directed.

Demolation of brickwork or stone/boulder masonry, laid in cement morter complete all as specified and directed.

M & L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15m thick on fair faces of brick work in CM 1:6 and finished surfaces even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of white wash omplete all as specified and directed.

M&L for preparing of old plastered surfaces including cornices pillasters and wall features by washing,rubbing down and stopping of distermpered and painted surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for Avg 25 thick PCC (1:2:4) type B-0 as in flooring and other simillar works (using 12.5mm graded stone agg) for filling of dipressions in roofs slab or maintaining the proper slope to roof, floor etc complete all as specified and directed.

M&L for Coloured non skid ceramic tiles 7 to 8mm thick (square/rectanglar) area of each tile exc 0.11 sqm but n exc 0.18 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,laid over 15mm thick bedding layer of CM 1:4 complete all as specified and directed.

M&L for Coloured non skid ceramic tiles 7 to 8mm thick (square/rectanglar) area of each tile exc 0.11 sqm but n exc 0.18 sqm ,in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,laid over 15mm thick screeding in CM 1:4 complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n exc 1.50 Sqm complete all as specified and directed.

Taking down and refixing in the same opeing shutters of size exc 1 Sqm but n. Exc 2 sqm each complete all as specified and directed.

Taking down shutters of size exc 1 Sqm but n. Exc 2sqm each complete all as specified and directed.

S&F, 40mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35mm thick IInd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); fitted to chowkats complete all as specified and as directed by the Engineer-in-Charge

S&F, Aluminium anodised barrel tower bolts, 200mm long , of extruded section and fixed complete all as specified and directed.

S&F in repair Aluminium anodised barrel tower bolts, 200mm long , of extruded section and fixed complete all as specified and directed.

S&F MS butt hinges 100mm long medium weight cold rolled complete all as specified and directed.

S&F in repair MS butt hinges 100mm long medium weight cold rolled complete all as specified and directed.

S&F aluminum anodized handle 150mm long complete all as specified and directed.

S&F in repair aluminum anodized handle 150mm long complete all as specified and directed.

S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F in reapair aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

M&L for applying two coats of synthetick enamells paint over a coat of red oxide primer on new steel surfaces of any description exc 10cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of synthetick enamells paint over a coat of pink primer on new wooden surfaces of any description exc 10cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of synthetick enamells paint on old painted wooden surfaces of any description exc 10cm width or girth, including preparation of surfaces complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by the Engineer-in-Charge

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete, without glazing bars, dovetailed or welded complete all as specified and as directed by the Engineer-in-Charge

M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

S & F galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.

Dismantling ceiling board (fiber, pulp, insulated any thickness including cover fillets) complete all as specified and directed

M&L Suspended false ceiling system using Chicago metallic (E grid) exposed suspended system of grid section size 600mm x 600mm x 6mm comprising of GI powder coated main 39mm x 24mm x 0.80mm thick (thickness comprising of GI / 0.40 + PPPCGS / 0.30) Cross Tee 29mm x 24mm x 0.80mm thick and wall angle 22.2mm x 22.2mm x 0.65mm thick with and including 4mm thick HPSC (High pressure steam cured) pre-primed self imposed fixtured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash fasteners from purlins of the roof with clips with provn of light fixture complete all as directed make EVEREST or other equivalent make as approved complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm nominal area PVC insulated and unsheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including PVC rigid concealed conduit (heavy grade) including chases cutting as required on site and conduit accessories along with continous earth wire 1.5sqmm PVC insulated and unsheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and including cadmium plated sunk Modular metal flush boxes for modular switches complete all as specified and directed for One light point controlled by one switch one way . (Note:- modular white cover and plate with frame shall be measured and paid saperately).

All as per item No 52 here in before but One fan/Ehhaust fan point controlled by one switch one way complete all as specified and directed.

All as per item No 52 here in before but One socket outlet 5 Amps 5 Pin on same board with other switches complete all as specified and directed.

All as per item No 52 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge.( circuit to be laid seperatly )

S&F modular switch 1 way 6 amps 1 module complete all as specified and directed.

S&F modular switch 1 way 16 amps 1 module complete all as specified and directed.

Supply and fix Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 modulecomplete all as specified and directed.

S & F modular socket 6A/16 A-2/3 pin combined 2 module complete all as specified and directed.

S&F Fan regulator step rotary type, 120 W -2 module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 3 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 4 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 6 Module complete all as specified and directed.

Supply and fix Modular white cover plate with Frame 8 Module complete all as specified and directed.

S& F blank speacer plate for single module complete all as specified and directed.

Supply and fix ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed.

Supplying and fixing in replacement of coils of ceiling fan motor, 230 volt of 1200 mm with super enamel copper winding wire of proper gauge, weight etc (having same nos of turns), winding using insulating materials varnishing, heating, baking, re-assembling the fan after making it functional and testing complete all as specified and as directed. (Weight of copper winding wire shall be same as existing ).

All as per Serial Item No 67 here-in-above but exhaust fan upto 200/250mm size/sweep complete all as specified and directed.

Supply and fixing in replacement recessed mounted 3600lumens, 6500K, 2'x2' LED ceiling light fitting with 60mm width CRCA body, opal acrylic diffuser, electronic driver, system life 50000hrs@L70%, PF 0.95, THD <10%, CRI >80,etc and all accessories pre-wired includingconnecting up complete all as directed. Make: Philips Full Glow RC380B , Wipro LM25-481-XXX-65-G1 or Crompton LCTRP-36-CDL.

Supply and fixing in replacement of 20 Watt 6500K LED batten 2000lumens fitting with extruded aluminium housing four feet with integrated LED & electronic driver and all accessories pre-wired including connecting up complete all as specified and directed.

Supply and fixing in replacement of LED light fitting, 10 Watt, 1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories pre-wired including connecting up complete all as specified and directed.

Supplying and fix in replacement bearing suitable for exhaust fan,up to 200/250 mm size complete all as specified and as directed.

Supplying and fixing in replacement ball bearing of suitable size for ceiling fan and pedestal fan complete all as specified and as directed.

Material and labour for spray painting one coat to ceiling fan any sweep fixed at different location with synthetic enamel paint including filling cavities with filler after cleaning all dust, dirt etc including writing MES No as exists and re-fixing complete all as specified and as directed.

Supply and fix Isolator DP 40 Amps, 240 Volts complete all as specified and directed.

Supply and fix MCB SP 20 Amps cpacity, 10 KA ratings complete all as specified and directed.

S & F MCB distribution board single pole and neutral 8 way double door factory made sheet steel, phosphates, powder coated with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail double door and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

M&L for Excavation in trenches in soft/loose soil n.exc 1.5mtr deep and n excl 1.5 mtr wide for laying of HT under ground cable, foundation of pole etc and gettting out including dressing / trimming sides and levelling bottom of excavation complete all as specified and directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exc 25 cm thick each layer in soft/loose soil complete all as specified and as directed.

Removing excavated materials (soils) not exc. 50 m and depositing where directed at a level not exc.1.5 mtr above the starting point complete all as specified and as directed.

M & L for sand cushioning with dry sand for underground cable by providing a layers of 8 cm deep before laying and 15 cm deep after laying the cable and punned down to 18 cm depth including streching the cable complete all as specified and as directed. (Note -Only punned depth shall be measured).

Supply and laying reinforced precast concrete cable cover class HV, Type I, flat of size 300 mm X 180mm X 40mm complete all as specified and directed.

Supply & laying G I tubing 80 mm bore light grade for protection of cable at road crossing /hard standing and fixed to pole with clamps as per site requirement etc complete all as specified and directed.

Supply, laying, connecting and testing HT UG XLPE insulated screned, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) with aluminum conductor, 11000 volts, grade cross sectional area 95 sqmm , 3 core suitable for 11 KV earthed system complete all as specified and directed.

Supply and fix cable jointing Kit for 11KV grade cable of End termination joint complete with Jointing material (Heat shrinkable)and accessories suitable for 3 core XLPE armoured, alluminum conductor cable of size upto 95 sq mm and complete all as directed by Engineer-In-Charge.

Supply and fix HT/LT cable route indicator duly painted with two coatsof grey colour synthetic enamel paint over one coat of red oxide primerr, oval shape of size 200 mm X 150 mm X 6 mm thick cast iron disc with letters HT/LT (as required on site) embosed and fixed on 25 mm x 25 mm x 5 mm thick MS angle for 50 mm long including necessary PCC in 1:3:6 type C1 using 20 mm aggregate and 15 mm thick plasterring in cm (1:4) all around below ground levvel of size 650mm x 300 mm x 250 mm embedded in PCC block, all as specified and directed.

RADHA ENTERPRISES