RySS

MASONRY WORK IN CM (1:6) PROP WITH FLYASH CEMENT SOLID BLOCKS OF SIZE 290 X 225 X 140 MM WITH A COMPRESIVE STRENGTH NOT LESS THAN 50 KG/SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND CURING BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. SUPERSTRUCTURE WALLS 225 MM THICK BASEMENT (APSS NO. 501&504).

PLASTERING TO SUPERSTRUCTURE 12 MM THICK IN TWO COATS, WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING, INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, CURING, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK. FOR EXTERNAL FACES OF BUILDING -GROUND FLOOR (APSS NO: 901&904)

PROVIDING AND APPLYING SYNTHETIC PLASTER PUTTY OR EQUIVALENT PUTTY SUCH AS BIRLA WALL CARE PUTTY OF AVERAGE 1 TO 2 MM THICK OVER PLASTERED SURFACE TO PREPARE THE SURFACE EVEN AND SMOOTH AFTER THOROUGHLY BRUSHING THE SURFACE TO REMOVE ALL DIRT AND REMAINS OF LOOSE POWDERED MATERIALS, APPLYING EMERY PAPER, SAND THE SURFACE, CLEAN & WIPE OFF LOOSE DUST, APPLYING, KNIFING PASTE FILLER BY PUTTY KNIFE / MUSLIN PAD, AIR DRY FOR 2-3 HRS., SAND WITH 180 AND 320 NO. EMERY PAPER FOR THE SURFACE PREPARATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL OPERATIONAL, INCIDENTAL, LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK - INTERNAL WALLS.

PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK. ALL FLOORS (APSS NO:908)

FLOORING WITH DOUBLE CHARGED / MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, IS:13712, IS:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS AS DIRECTED BY THE ENGINEER-IN-CHARGE, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB, INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, INCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK, .

SUPPLY AND FIXING OF TOUGHENED GLASS12 MM THICK ON ELEVATION SIDE WITH HAVING A DOOR 2 FFET HANDLE 2NOS AND 2NOS OF DOOR HINGES OPENING OF 4 FEET X7FEET WITH 12MM THICKNESS INCLUDING ALROUND FRAME NUTS AND BOLTS GUM, TAPES ALL MATERIALS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND , COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY AND INSTALLATION OF MS FABRICATED DISPLAY RACKS COVERED WITH 5 WOODEN WORK HOLDING CAPACITY OF150 KGS HEIGHT 7FEET LENGTH 4FEET DEPTH 1.5FEET USING MATERIAL MILD STEEL POWDERED COATED PREPAINTED 0.7MM TO 0.9MM THICK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, , COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY AND FIXING OF DISPLAY RACKS OF HEAVY DUTY GL MAKE WITH LOAD BARING 6 OF 40 KGS FOR EACH RACK WHICH ARE COVERED WITH 16MM PLYWOOD SHEETS WITH LAMINATE FINISH CAPACITY OF150 KGS HEIGHT 7FEET LENGTH 4FEET DEPTH 1.5FEET USING MATERIAL MILD STEEL POWDERED COATED PREPAINTED 0.7MM TO 0.9MM THICK INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, , COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLYING AND FIXING ALUMINIUM COMPOSITE CLADDING WITH SKIN MATERIAL 0.50 MM THICK ALUMINIUM SHEET COVER MATERAL NATURAL POLYETHYLENE ALUMINIUM CLADDING PANEL FIXED WITH EXTRUDED ALUMINIUM BASIS FRAME (50 X 25 X 1.50 MM) ANGLE CLEATS, WEATHER SEALANTS, RIVETS, GI BRACKETS ALL AS APPROVED, USING SUITABLE BOLTS ON STRUCTURAL STEEL WORK INCLUDING NECESSARY ACCESSORIES COMPLETE IN ALL RESPECTS BUT EXCLUDING COST OF STRUCTURAL STEEL FABRICATION. IF ANY, ACP CLADDING - 4 MM THICK INCLUDING ALL SCAFFOLDING AND LABOUR CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY AND INSTALLATION OF SMALL DISPLAY RACKS BEHIND TOUGHNED GLASS 12MM THICK 5FEET X 3FEET WITH BRACKETS SHHET 2.5MM LEG SIZE 40X60MS STEEL 1.6MM WITH BOTTOM REMAINING 8GLASS SHELVES SIZE 15" WITH IVOERY COLUR MAKE OF BOTH MS AND WOODEN ALL MATERIALS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND , COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY AND FIXING OF HPL ELEVATON BEHIND THE RACKS AS SHOWN RENDERSUPPLY AND INSTALLATION OF SMALL DISPLAY RACKS BEHIND TOUGHNED GLASS 12MM THICK 5FEET X 3FEET WITH BRACKETS SHHET 2.5MM LEG SIZE 40X60MS STEEL 1.6MM WITH BOTTOM REMAINING 8GLASS SHELVES SIZE 15" WITH IVOERY COLUR MAKE OF BOTH MS AND WOODEN ALL MATERIALS INCLUDING COST AND CONVEYANCE OF ALL MATERIALS, LABOUR CHARGES, SCAFFOLDING AND , COMPLETE FOR FINISHED ITEM OF WORK.

SUPPLY OF 4 TR 4 STAR INVERTER CASSETTE TYPE AC UNIT WITH CEILING MOUNTED INDOOR UNIT AND OUTDOOR CONDENSING UNIT HERMETICALLY SEALED COMPRESSOR SUITABLE FOR OPERATION ON AC SUPPLY CAPABLE OF PERFORMING COOLING DEHUMIDIFYING AIR CIRCULATING AND FILTERING WITH COOLING AND CONDENSING UNITS ETC. COMPLETE WITH WIRELESS REMOTE CONTROLLER, WITHOUT REFRIGERANT PIPING AND CABLE WITH COPPER CONDENSER. THREE PHASE CAPABLE OF DELIVERING 48000 BTU / HR AND ABOVE WITH OPERATING ON REFRIGERANT R-32 / R-410A. MAKES: . MAKES: BLUE STAR / CARRIER / DAIKIN/LG

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point including cost of suitable size of modular metal box of the same make of switch including all labour charges etc., complete (Makes: Precision/Universal& Marudhar/VIP / GM / Sudhakar/ Orbit).

Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade with IS:9537 part 3 regid PVC pipe (ISI mark) of makes concealed in wall with all required accessories including masonary work and labour charges etc., complete. (For circuit mains, power sockets and computer boards only) (Makes: ISI MARK: Precision/Universal& Marudhar/VIP / GM / Sudhakar/ Orbit).

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant low smoke FRLS / HFFR PVC insulated 1100V grade as perIS:694/1990 specification flexible copper cable in existing pipe with 6A one way modular switch with 6 modular cover frame, 3 plate Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non Residential Buildings. Wire Make: (Finolex/RR kabel/Havells) Ceiling rose: Anchor/ Gold Medal Olive /Million Zoom. Switches & Cover frame Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/ L&T-englaze/ GM- (Four-Five)/ Goldmedal(GIFA)

Supply and fixing of 6/10A 3/2 pin modular plug socket with 6/10A one way modular switch control on a common switch board covered with 3 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM- (Four-Five)/ Goldmedal(GIFA)

Supply and fixing of 16/20A 2 Modular 1 way Socket - 1No with shutter and 16A / 20A 1 Way Modular Switch- 1No with 6/10A 3/2 pin modular plug socket - 1Nos with 6/10A one way modular switch -1Nos control on a common switch board covered with 6 module cover frame including earth con and including wire leads, earth connections along with all labour charges etc., complete. Switches & Cover Frame Makes: Makes: Legrand (Myrius/Lyncus) / Schneider (Clipsal X/ Livia AB)/ Crabtree (Murano/ Athena) / Lauritz Knudsen - englaze ( Formerly L&T) / Honeywell (Blenzero) for Raw power.

Supply and fixing of 6/10A 3/2 pin modular plug socket - 2Nos with 6/10A one way modular switch -2Nos control on duly providing on ready made Reagent Rack of Modular Table with 6 modular cover frame including earth connections and all labour charges etc., complete. Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM- (Four-Five)/ Goldmedal(GIFA) ( For Raw Power)

Supply and fixing of 16/20A 1 way modular switch-1 no with 20A modular socket -1no and 6/10AA 3/2 pin modular plug socket - 3 nos with 6A 1 way modular switch - 3 nos with 12 Module box size covered with 12 module cover frame including earth connections and all labour charges etc., complete.(For computer switch board) Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM- (Four-Five)/ Goldmedal(GIFA). (for UPS)

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED, 490Lumens bulb (for new installation). Holder Make: Anchor / Gold Medal Olive / Million Zoom LAMP Make:Phillips / OSRAM / GE / Crompton.

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. [for Earth lead to circuit mains, power sockets]. Make: Finolex/RR kabel/Havells / Fortune Art

Supply and run of 3 of 36 /0.3mm (2.5 Sq.mm) FRLS / HFFR/ZHFR P.V.C. insulated 1100V grade as perIS:694/1990 specification for insulated flexible copper cable in existing pipe for run of circuits, power plugs & computer boards including all labour charges etc., complete. ( For Phase Neutral and Earth) ( Circuit Mains to Switch Board) Make:Finolex/RR kabel/Havells / Fortune Art

Supply and run of 3 of 56/0.3mm (4 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.( For Phase Neutral and Earth) [from Distribution board mains to16A Sockets]. Make:Finolex/RR kabel/Havells / Fortune Art

Supply and run of 5 of 84/0.3mm (6 Sq.mm) FRLS / HFFR/ZHFR PVC insulated 1100V grade as perIS:694/1990 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete.[from Distribution boards to A/C points and mains to PDB and UPS DB]. Make:Finolex/RR kabel/Havells / Fortune Art

Supply installation testing and commisioning of1no of Cat6 Tooless builtin crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand

Supply and run of LAN Cable cat - 6 UTP cable in existing PVC conduit including cost and conveyance of all materials and labour charges etc., complete. Makes:D Link / AMP / Molex / Legrand / Krone.

Supply of 48" (1200mm) Sweep Star rated Ceiling Fan, with double ball bearings without Regulatorincluding cost and conveyance of all materials and labour charges etc., complete. Makes: Crompton (HS Decora/Aura) / Havells Spark deco / Orient summer crown

Supply and erecting 2 Module Modular type Electronic step type Fan Regulator. complete erected on existing board.Make: Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM- (Four-Five)/ Goldmedal(GIFA)

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes: Phillips / GE / Crompton.

Supply and fixing of 36W LED Slim Panel Round/ Square for suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltaGE-Venture ranGEVenture of 150 to 265 Volts AC, P.F > 0.9, Sur GEVenture protection: 2KV,THD<10%, with high power LED's having efficacy of > 100 lumins/watt,CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply and fixing 4way TPN D.B with board with IP-43 protection suitable for three phase 40A FP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 12 Nos for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(for LDB) Make: Legrand(Ekinox 3) / Schneider-A9 / Seimens /L&T Newrang MCB Make: Legrand- DX3/ Scneider - A9/ Siemens - 5SX4 / L&T - AU (or) Exora.