Providing LWSS HPPCL Colony in GP Dadahu in Tehsil Nahan Distt. Sirmour HP

Amount

Supply, erection, testing & commissioning of submersible pumping set of reputed make KSB /Kirloskar/Mather & Platt/ Jyoti or any other reputed make,conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having characteristics as mentioned in item No. 1 A) ,greased packed bearings & shell with wound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor . The pump set should include water level guard, errection clamps, cable clips & depth gauge etc. & suitable for operation on data given below:-

Note:-Tenders to be called for per set not for per HP rate

Static head in mtrs.:- 93 mtrs

Total Head in mtrs :- 150.50 mtrs

Capacity (in LPS):- 3.736 LPS

Length of Rising Main:- 270 mtrs

Dia of R/Main (in mm):- 65mm

HP:- 2x15HP= 30 HP

Providing and fixing of Auto control panel with push button star delta starter for submersible pumps of L&T and reputed make fabricated with M.S sheet and Angle stand duly painted and complete with internal wiring ,comprising of main switch of suitable Amp. T.P. Volt meter, ammeter,hour run meter, phase indicating lamps with GSM based , Remote start/stop operation call/SMS for feedback regarding running of pumps & breakdown message, timer scheduling for fixed hours in a day,Inbuilt protection against overload/undervoltage,Dry run,single phase preventor,Inbuilt GPS tracker,phase reversal configurable volt/current limits with a facility to access the system through minimum 10 Nos. authenticated mobile Nos. complete in all respect, including entire carriage of materials upto all leads and lifts,installation and testing at site with entire satisfaction of Engineer-in-charge.

Supply &fixing at site of Kirloskar/Kilburn/IVC/Fouress/Gled/BHEL/Leader /Pelicon /KSB make of suitable size cast steel double flanged swing check type reflux valve for delivery line of pump having bye pass arrangement & size one size higher than the nominal delivery size of pump and capable of withstanding nominal seat pressure as mentionmed in item No. 1(b)+ surge pressure & conforming to BIS-standards with up to date ammendments for delivery line of pump class of valve shall be ASA 300.

P/L at site suitable size copper PVC insulated armoured power three & half core cable conforming to BIS 1554 (Part I) -1988 or latest with up to date ammendments of Siemen/Gloster/ ICC/EICO /National /IEC make from meter of HPSEB to circuit breaker & from circuit breaker to bus bar switch & starter (one cable carrying all three phases) including all other electrical equipment/accessories such as thimbles,flexible pipe,solder,nuts & bolts,cable glands etc. laid in pipes or trenches under floor. The type,size & make will be subject to approval of HPSEB authorities. In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost .

P/L PVC jointless flat water proof cable as per BIS 694-1990 (latest with up to date ammendments) suitable for the pump sets offered from circuite breaker to motor & motor to starter including all other electrical equipments such as thimbles, flexible pipes, solder,nuts & bolts,cable glands etc. laid in pipes or trenches. The type,size & make will be subject to approval of HPSEB authorities.In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost.

Supply & errection at site of floor/wall mounted power factor shunt capacitor of suitable KVAR conforming to BIS 2834-1986 or latest with upto date ammendments of BHEL/GEC/Machneil/ Mager/Bajaj/L&T make to raise the prevailing power factor at site to 0.95 for direct connection to induction motor individually,of required KVAR according to HP of motor offered including cable Siemens/Gloster/ICC make from busbar chamber to capacitor & also including L&T//Kilburn/Standard/Siemen/Havells make ICTP switches conforming to BIS 4064-1978 or latest with HRC fuses.(Range to be specified by the tenderer).

Supply and fixing at site of 100mm dia circular dial pressure gauge of suitable range & standard make such as Fiebeg/Bourden/ Precision/PREGA with all accessories such as stop cock,copper tubing etc. conforming to BIS 3624-1987 or latest with up to date ammendments.

Rising main

Excavation in drains and channels etc.in earth work for pipes up to all depths in all classification of earthwork such as pick work, jumper work, saturated soil including bailing or pumping out water, blasting soft/hard rock or chiseling soft / hard rock where blasting is prohibited in all lifts including jungle clearance wherever required, trimming & dressing of sides, leveling of beds to correct grade including shoring/struting, planking, timbering & dewatering wherever required stacking the useable/unuseable material/soil seperately & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unuseable material as directed with in all leads & lifts including restoration of un-metalled surfaces to its original condition & including cost of diversion for traffic, night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with-in all leads & lifts as per directions of the Engineer Incharge.

Laying , jointing ,testing & commissioning at site in trenches following plain ended GMS pipes of heavy/ medium gread as under confiriming to BIS 1229 (part-1) 1990 or latest with upto date ammendments capable of with stading requierd test pressure as prescribed in BIS code in randum lenghts of 5.5 to 6.50 mtr the pipes ends shall be bevelled sutaible for butt weld including the cost of jointing with butt welding conforming to IS 816-1969 or latest as aplicable (leak proof) in three layers at site of work with welding rods of standard make and all allied accessories whatever requried for welding at site tail pieces tees bends manufatured from parent pipes etc, and cutting of pipes whatevev required as pr site requirment including carriage all leads and lifts as directed by the Engineer Incharge (Earth wook shall be measured & paid for seprately )

S.No R.Ds Nominal Dia Length (in Mtrs)

1 0 270 65mm ( H) 270 (R/main)

2 0 40 65mm ( H) 40(column Pipe)

3 0 70 65mm ( M) 70( Tank to tank line)

Providing, welding and fixing M.S. plate flanges of various dia (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date ammendments to G.I Pipe after every 90 mtrs as per site requirement including cutting of of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relvent I.S. Code i.e. IS 816-1969 or latest as applicable with up to date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with up to date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect including all leads and lifts and as per entire satisfaction of Engineer - in - charge

S.No R.Ds Nominal Dia Length (in Mtrs) FT

Excavation in foundation trenches etc . in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of watering and then disposing of all surplus excavated earth with in all leads, lifts foundation etc. consolidating each deposited layer by ramming and complete in all respects and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:4:8 (1cement:4app.sand:8app. graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work , including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..

in foundation and plinth

in wall(any thickness not less than 0.1m thickness)

in Suspended Floor, roof landing shelves and cantilever upto floor two level

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

a)Flat surface such as soffits of suspended floors, roofs,landings and the like floors etc.in all thickness.

b)Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses,plinth and string sources and the like.

c) Edges of slab and breaks in floor and wall under 200 cm wide

Providing tor steel reinforcement for RCC work including banding, binding and placing in polsition complete upto floor two lelvel including all leads, and carriage of material at site and as directed by the Engineer Incharge.including cost of binding wires.

Providing and fixing cast iron cover with frames for man holes of size 455X610mm intenal dia metre C.I. Cover (Medium) duty the weight of cover to be not less than 38Kg( weight of cover 23 kg andweight of frame 15 kg) I/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing GMS pipe for scour pipe, outlet pipe 50mm dia , including all leads, lifts and carriage of material at site and as directed by tbe Engineer Incharge.

Providing and fixing brass full way valves with wheel of approved make and relevent ISS complete in all respects including of all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.(50mm)

Steel work welded in built up sections and framed work including cutting,hoisting,fixing in position and applying a priming coat of red lead paint. (a) In gratings, framed guard, bars, ladders, raillings, brackets and similar works including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Cutting in earth work and disposing of excavated earth upto a lead of mtrers including all leads material at site and as directed bythe Engineer Incharge .

Providing and laying cement concrete 1:5:10 (1cement:5app.sand: 10app.graded stone aggregate 40mm nominal size) with 15% plum and curing complete excluding cost of form work in retaining walls/ breast walls, the size of plums shall usually be 150mm to 300mm as per I&PH specification,including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Stone filling behind the retaining wall, including all leads, and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing PVC Pipe 80 mm dia from P or s trap to soak pit & weep hole in soak pit site and including all leads ,lifts and carrige of material at as directed by the Engineer Incharge.

Providing and laying cement concrete 1:6:12 (1cement: 6app.sand: 12 app. graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Square rubble masonary coursed with hard stone of approved quality in foundtion and plinth including racking out joints in cement mortar 1:6 (1cement :6sand) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying damp proof course 38 mm thick with cement concrete 1:2:4(1cement:2sand :4graded stone aggregate 12.5mm nominal size_) & curing complete.including entire carriage of material upto all leads and lifts

Applying a coat of hot bitumen (Maxphalt 80/100 or equivalent)using 1.70m kg/sq. mtr. On damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil.including entire carriage of materil uopto all leads and lifts.

2nd class brick work using common burnt clay building bricks in superstructure in cement mortar 1:6(1cement:6sand)including entire carriage of material upto all leads and lifts.

Providing and laying RCC work 1:2:4(1cement:2 sand:4graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and reinforcement for RCC work in suspended floors,roofs etc. including entire carriage of material upto all leads and lifts.

in wall(any thickness not less than 0.1m thickness)

20mm cement plaster in single coat on rough side of brick stone masonary for interier plastering upto floors two level including arrisis ,internal rounded angle ,chamfers and rounded angles not exceeding 80mm in girth and finished even and smooth in cement morter 1:4(1cement: 4app sand) including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

6mm cement plaster to ceiling in cement morter 1:3( 1cement:3app sand) including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing wood work in frames of door, window, clearestory window and other frames wrought, framed and fixed in position with sal wood in all leads & lifts. and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing panelled and glazed shutter for doors, window and clearstory window including bright finished /black enamlled iron butt with necessary screw 40mm thick 2nd class d/ wood including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Applying priming two coats of wood preservative on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil , grease, dirt and other forign and including preparing the surface by thoroughly cleaning oil , grease, dirt and other forign matter sand papering and knotting including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Supplying and fixing rolling shutters of approved make made of 80mm x1.25mm MS laths inter loced together through their entire length and joined together at the end locks mounted on specially designed pipe shaft, with brackets side guide and arrangement for inside and out side locking with push pull operation complete by excluding the cost of the top cover and spring

Shutters having width below 3.5 metres.

providing and fixing 27.5 centimetre long wire spring grade no2 for rolling shutters

Providing and fixing top cover for rolling shutters

Providing and fixing ball bearing for rolling shutters.

Applying priming coats over new wood and wood based surfece after and including preparing the surface by thoroughly cleaning oil , grease, dirt and other forign matter sand papering and knotting ready mixed paint brusing wood primar pink, including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Painting two coats (excluding priming coat) on new wood based surfece with enamal paint to give an even shade including cleaning the surface of all dirt dust and other foreiign matter , sand papering and stoping with paint other then white , leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

White washing with lime on undecorated wall surface (two coat) to give an even shade including thourghly brooming the surface to remove all dirt ,dust morter dirts and other foreign matter including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Cement concrete flooring 1:2:4(1cement :2app sand:4app graded stone aggregate 20mm nominal size ) laid in one layer finished with a floating coat of neat cement 40mm thick including all leads, lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing M.S round or square bars at required spacing in wooden frames of wooden and clearstory window ,including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Prviding 40x3mm flat iron hold fast 40mm long including fixing to frame with 10mm dia mtrs bolts nuts and wooden plug and wooden plug and embending in cement concrete block 30x10x15mm 1:3:6(1cement:3app sand:6app graded stone 3agg. 20mm nominal size.including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing M.S tower bolts (barel type) with necssary screw etc. complete 250x10mm including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing M.S sliding door bolts with nut and screw etc. complete 250x16mm including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing M.S. handles with necessary screws etc. complete including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge. 100mm

Providing and fixing M.S hooks and eyes 100mm including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing under layer for plinth protectionatin of 75mm thick (Un consolidated) bed of dry brick stone 40mm nominal size well rammed and consolidating and grouted with fine sand including preparation of ground including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing plinth protection 50mm in cement concrete 1:3:6(1cement :3app sand:6app graded sotne agg. 20mm nominal size) including finishing the top surfece of concrete smooth including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

C/O random rubble masonary open surface drain 150mm width with hard stone of approved quility in cement morter 1:6(1cement:6app sand) including earth work 100mm bed concrete 1:5:10 (1cement:5ap sand :10app graded stone agg. 40mm nominal size) and curing complete zand 25mm cement plaster 1:3(1cement :3app sand) including all leads , lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing W/C toilet sheet with CP Brass hings (white) including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing PVC Pipe 80 mm dia from P or s trap to septic tank & vent. in septic tank including all leads ,lifts and carrige of material at as directed by the Engineer Incharge.

Providing and fixing steel trap P Trap including all leads ,lifts and carrige of material at site and as directed by the Engineer Incharge.

Providing and fixing steel trap S Trap (PVC) including all leads ,lifts and carrige of material at site and as of material at site and asdirected by the Engineer Incharge.

Providing and fixing vent pipes & fittings single socked pipe 50 mm dia (1.83 mtr. Long) including all leads ,lifts and carrige of material at site and asdirected by the Engineer Incharge.

[email protected]

Vijay Pal Singh