REPAIR AND MAINT OF CASSETTE AC INSTALLED IN NTC AT DEFENCE LAB JODHPUR

Amount

M&L for servicing of casette type inverter AC of 1.65/2.7 TR capacity indoor & 4.0 TR outdoor, cleaning of condenser, cooling coil and other components with approved chemical solution & clean water, greasing of fan, motor, blower etc without damage any part and reinstall at the same location. The rate of wiring, thermistor any type, wire harness assembly, crankcase heater, coil motorised valve, filter etc are required deemed in the quoted rates.

S&F in replacement PCB for out door any type/model of 4.0 TR capacity of existing make complete all as specified and directed by Engineer-in-charge.

M&L, repairs to existing PCB for outdoor any type/model of 4.0 TR capacity of existing make complete all as specified and directed by Engineer-in-charge.

S&F in replacement PCB for indoor any type/model of casette AC 1.65/2.7 TR capacity of existing make complete all as specified and directed by Engineer-in-charge.

M&L, repairs to existing PCB for indoor any type/ model of casette AC 1.65/2.7 TR capacity by changing parts /soldering etc complete all as specified and directed by Engineer-in-charge.

S&F in replacement Adaptor complete all specified and directed by Engineer-in-charge.

M&L recharge top up gas refrigerant R-410A in casette type of cap 1.65/2.7 TR complete all as specified and directed by Engineer-in-charge.

S&F in replacement fan blower of casette type 1.65/2.70 TR capacity of existing make complete all as specified and directed by Engineer-in-charge.

S&F in replacement fan motor for indoor of casette type 1.65/2.70 TR capacity of existing make complete all as specified and directed by Engineer-in-charge.

S&F in replacement fan motor for oudoor of casette type AC 4.0 TR capacity of existing make complete all as specified and directed by Engineer-in-charge.

M&L finding out leakage with the pressure testing of the condensor/cooling unit/ compressor including nitrogen flushing if required and dismantling the same for recharging and stop leakage by brizing/soldering including charging the R-410A gas to required level and testing the AC for the entire satisfaction of Engineer-in-Charge.

S&F in replacement of compressor 4.0 TR Capacity casette type Air conditioner as per existing make including leakage testing etc complete all as specified and directed by Engineer-in-charge. NOTE:- (i) The rate quoted by the contractor shall be inclusive of all charges like transporation, fittings, etc. complete with necessary guarntee period including oiling and R-410A gas charging, testing etc complete.

S&F in replacement of blower and bush of casette type capacity of existing make complete all as specified and directed by Engineer-in-charge.

S&F in replacement of fan blade of casette type capacity of existing make complete all as specified and directed by Engineer-in-charge.

M&L, repairs to existing blower moter of any capacity by re-winding / changing parts /soldering etc complete all as specified and directed by Engineer-in-charge.

S&F in replacement blower moter of any capacity complete all as specified and directed by Engineer-in-charge.

Supply and fix capacitor of any type suitable for outdoor/ indoor unit as per sample and make for existing all as directed.

Supply and fix in replacement of old unsv remote control suitable for cassette type AC as per sample and make for existing all as directed.

M&L, for pipe insulation suitable for outdoor/ indoor complete all as specified and directed by Engineer-in-charge.

S&F contractor suitable for outdoor unit complete as per sample and make for existing all as directed by Engineer-in-charge.

S&F filter drain pump for indoor unit cassete type complete as per sample and make for existing all as directed by Engineer-in-charge.

S&F copper pipe/ refrigerent tube as epr existing size as required complete all as directed by Engineer-in-charge.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as directed by Engineer-in-charge.

Supply and fixing MCB 6-32 amp rating 240Volt, 10KA 'C' curve double poles in the MCB DB complete with connection testing and commissioning all as specified and as directed by Engr-in-Charge.

Supply and fixing MCB 40-63 amp rating 240Volt, 10KA 'C' curve double poles in the MCB DB complete with connection testing and commissioning all as specified and as directed by Engr-in-Charge.

Supply and fixing MCB 40-100 amp rating 415 Volt, 10KA 'C' curve 4 poles in the MCB DB complete with connection testing and commissioning all as specified and as directed by Engr-in-Charge.

S&F MCCB 4 pole 415 volts 160 Amp breaking capacity 36 KA including taking down old UNSV MCCB Complete all as specified and as directed by Engr-in-Charge.

S&F MCCB 4 pole 415 volts 630 Amp adjustable type breaking capacity 50 KA including taking down old UNSV MCCB Complete all as specified and as directed by Engr-in-Charge .

S&F MCCB 4 pole 415 volts 63 Amp rotary type breaking capacity 16 KA including taking down old UNSV MCCB Complete all as specified and as directed by Engr-in-Charge .

S&F three core copper cable 6 sqmm all as specified and as directed by Engr-in-Charge

SHRI BHIKSHU ART AND CONSTRUCTION CO (BID ID -3094706)

SNEH CORPORATION (BID ID -3094438)