Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
13 Jan 2026, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
RJT DIV.
1 condition
We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of Contract (latest revision) and upon the terms of the Revised Special Conditions and Instructions for the Guidance of the Contracts issued by the Western Railway S/137/F Revised May 2011 Amendment No. 12 of August 2018
33 conditions
The Vendors are advised to fill "Compliance to special tender condition / Checklist" with each offer by specifically stating "yes" or "No" against each special condition / Checklist and in case of a "No" must fill reason for not agreeing with that special condition / Checklist in the remark entry box as provided therein.
MARKING : Manufacturer to mark his name and date of manufacture as per drawing, wherever indicted, or at a location where it may not get obliterated in service on the item being supplied by them against the purchase order. Supplies received without this are liable to be rejected by consignee
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer are required to mention HSN Code of the offered goods and to quote correct applicable rate of GST. Tenderer will be solely responsible for correctness of the HSN code and the rate of GST for the offered goods
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 location across Gujarat · 1,266 Numbers total
AIR FILTER AND REGULATOR, ISOLATING COCK,FITTING STRAIGHT CONNECTOR
87256215~WR
87256215
Open - Indigenous
Goods
Devbhumi Dwarka, Gujarat
₹0
Exempted
13 Jan 2026
23 Dec 2025
19 items · 1,266 Numbers total
PRESET AIR FILTER AND REGULATOR 1/4 INCH AT 3 BAR PRESSURE WITH BRACKET AND FASTENERS DESIGNED FOR PRE SSURISED FLUSHING SYSTEM; PART:SPAC.0018577; MAKE: SPAC OR SIMILAR. [ Warranty Period: 30 Months after the date of deliver y ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 25.00 Numbers |
| Total | 25 Numbers | |
FERRULE CONNECTOR FOR AIR LINE (APPLICABLE SS TUBE SIZE 3/8" AND 1/4" BSP MALE THREAD) IN PNEUMATIC LINE DESIGNED FOR PRESSURISED FLUSHING SYSTEM ITEM CODE CON.0002597 [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 50.00 Numbers |
| Total | 50 Numbers | |
ANGLE SEAT VALVE-3/4 inch, DESIGNED FOR ELECTRO PNEUMATIC PRESSURISED FLUSHING SYSTEM (EPPFS) confirming to specification No. MMDTS 19027. Rev.03 (or Latest), SPAC ITEM CODE: SPAC.0011042. ACCEPTED MAKE: SPAC OR SIMILAR. [ Warra nty Period: 72 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 30.00 Numbers |
| Total | 30 Numbers | |
5/2 Push pull spring return valve-1/4" (with mounting brackets, knob, connectors, fasteners) designed for pressurized flu shing system as per MMDTS 19027. Rev. 03 or latest. SPAC.0011437. ACCEPTED MAKE/BRAND: SPAC OR EQUIVALENT MAKE FUNCTIO NALLY COMPATIBLE IN PRESSURISED FLUSHING SYSTEM. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 25.00 Numbers |
| Total | 25 Numbers | |
ISOLATING COCK (1/4" BSP WITH BOTH END FEMALE THREAD) IN PNEUMATIC LINE DESIGNED FOR PRESSURSED FLUSHI NG SYSTEM, AS PER MDTS 19027. Rev.03. ITEM CODE SPAC.0000641 MAKE: SPAC OR EQUIVALENT MAKE FUNCTIONALLY COMPATIBLE IN RESSURISED FLUSHING SYSTEM OF INDIAN RAILWAY COACHES FITTED WITH PRESSURIZED FLUSHING SYSTEM OF SPAC MAKE. [ Wa rranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 70.00 Numbers |
| Total | 70 Numbers | |
"5/2 WAY SINGLE SOLENOID VALVE BSP 1/4 INCH (WITH MOUNTING 24VDC COIL & WITHOUT FITTINGS) DESIGNED FOR P RESSURISED FLUSHING SYSTEM MAKE: SPAC, PRODUCT COMPLY WITH IEC61373, Cat 2 & EN50155 TESTED FROM NABL AUTHORISED LAB" [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 40.00 Numbers |
| Total | 40 Numbers | |
SS KNOB FOR SPAC.0011437 DESIGNED FOR PRESSURISED FLUSHING SYSTEM AS PER MDTS 19027. Rev.03.MAKE: SPA C AC.0011436 OR EQUIVALENT MAKE FUNCTIONALLY COMPATIBLE IN PRESSURISED FLUSHING SYSTEM OF INDIAN RAILWAY COACHES FITTED WITH PRESSURIZED FLUSHING SYSTEM OF SPAC MAKE. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 150.00 Numbers |
| Total | 150 Numbers | |
FITTING ELBOW 8 MM TUBE, BSP 1/4 DESIGNED FOR PRESSURISED FLUSHING SYSTEM AS PER MDTS 19027. Rev.03. ITE M CODE SPAC.0011034 OR EQUIVALENT MAKE FUNCTIONALLY COMPATIBLE IN PRESSURISED FLUSHING SYSTEM OF INDIAN RAILWAY C OACHES FITTED WITH PRESSURIZED FLUSHING SYSTEM OF SPAC MAKE. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 70.00 Numbers |
| Total | 70 Numbers | |
FITTING EQUAL TEE 8MM TUBE, DESIGNED FOR PRESSURISED FLUSHING SYSTEM MAKE: SPAC ITEM CODE SPAC.001101 7 ACCEPTED MAKE/BRAND: FIRM`S OWN MAKE EQUIVALENT.EQUIVALENT MEANS IT SHOULD BE FUNCTIONALLY COMPATIBLE IN PRESS URISED FLUSHING SYSTEM. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
NOZZLE 3/4 X 3/4 AS PER MDTS 19027. Rev.03(or latest). MAKE: SPAC ITEM CODE CON.0000617 OR EQUIVALENT MAKE FUNCTIONALLY COMPATIBLE IN PRESSURISED FLUSHING SYSTEM OF INDIAN RAILWAY COACHES FITTED WITH PRESSURIZED FLUSHING SYSTEM OF SPAC MAKE [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 50.00 Numbers |
| Total | 50 Numbers | |
MUFFLER 1/4 (SS BODY) DESIGNED FOR PRESSURISED FLUSHING SYSTEM MAKE:SPAC, PART NO.SPAC.0009376, PRODU CT COMPLY WITH IEC61373, Cat 2 & TESTED FROM NABL AUTHORISED LAB [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 200.00 Numbers |
| Total | 200 Numbers | |
FITTING STRAIGHT CONNECTOR 8MM TUBE 1/4" DESIGNED FOR PRESSURISED FLUSHING SYSTEM MAKE: SPAC, PART NO . SPAC.0010997, PRODUCT COMPLY WITH IEC61373, Cat 2 & TESTED FROM NABL AUTHORISED LAB. [ Warranty Period: 30 Months a fter the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
ELECTRICAL PUSH BUTTON (1 NO+1 NC) GREEN LED INDICATOR WITH WIRE CONNECTOR DESIGNED FOR PRESSURISED FLUSHING SYSTEM, MAKE:SPAC, PART NO. SPAC.0011223, PRODUCT COMPLY WITH IEC61373, Cat 2 & EN50155 TESTED FROM NABL A UTHORISED LAB. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 100.00 Numbers |
| Total | 100 Numbers | |
CONTROL PANEL OF WATER PRESSURISER UNIT (WITH PANEL BOX, MOUNTING PLATE, SMPS, TIMER, DIN TERMINAL, DIN STOPPER, END PLATE, WIRE GLAND, SOLENOID VALVE, FITTING, MOUNTING PLATE, ILLUMINATED SWITCH AND FASTERNERS) DESIGNE D FOR PRESSURISED FLUSHING SYSTEM MAKE: SPAC, PART NO. SPAC.0012738, PRODUCT COMPLY WITH IEC61373, Cat 2 & EN50155 TESTED FROM NABL AUTHORISED LAB. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 1.00 Numbers |
| Total | 1 Numbers | |
SMPS, INPUT RANGE-110V AC/DC WITH 30% VOLTAGE TOLERANCE, OUTPUT-24VDC, DESIGNED FOR PRESSURISED FLUS HING SYSTEM, PART NO. SPAC.0018360, PRODUCT COMPLY WITH IEC61373, Cat 2 & EN50155 TESTED FROM NABL AUTHORISED LAB. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 20.00 Numbers |
| Total | 20 Numbers | |
MUFFLER 1/8 [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 150.00 Numbers |
| Total | 150 Numbers | |
FFERRULE CONNECTOR FOR AIR LINE (APPLICABLE SS TUBE SIZE 1/2" AND 1/4" BSP MALE THREAD) IN PNEUMATIC LINE DESIGNED FOR PRESSURISED FLUSHING SYSTEM MAKE: SPAC, PART NO. CON.0001562 . [ Warranty Period: 30 Months after the dat e of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 25.00 Numbers |
| Total | 25 Numbers | |
"ELECTRONIC TIMER SPDT DESIGNED FOR PRESSURISED FLUSHING SYSTEM CONTROL PANEL PRODUCT COMPLY WITH IEC61373, Cat 2 & EN50155 TESTED FROM NABL AUTHORISED LAB" PART:SPAC.0011211; MAKE: SPAC OR SIMILAR. [ Warranty Perio d: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 30.00 Numbers |
| Total | 30 Numbers | |
NON RETURN VALVE-3/4 inch, DESIGNED FOR PRESSURISED FLUSHING SYSTEM (EPPFS) conferming to Spec. MMDTS 19 027. Rev.03 (or Latest), SPAC ITEM CODE SPAC.0010906. ACCEPTED MAKE/BRAND: SPAC OR EQUIVALENT MAKE FUNCTIONALLY COMP ATIBLE IN PRESSURISED FLUSHING SYSTEM. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SECTION ENGINEER (C&W) OKHA, WR | Gujarat | 30.00 Numbers |
| Total | 30 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SpecificationMMDTS19027Rev.-032.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .