Providing & Fixing Furniture At New Multi Story ITI Taluka : Modasa District : Arvalli

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

1 Providing and supplying High Back Luxury Executive Chair 6.00 16261.00 Nos.

(Chairman / Director Level) with heavy-duty metal frame

construction. The chair shall be upholstered with premium

quality artificial leather / leatherette and molded PU foam, with

molded seat and back covers for enhanced durability and

aesthetics. The backrest foam shall be ergonomically contoured

with integrated lumbar support to provide superior comfort

during prolonged seating. The chair shall be equipped with high-

durability castors and a hydraulic gas lift mechanism. The gas

lift cylinder shall be Class-4 type and should carry a minimum 5-

year warranty. Dimensions: Back Size: 53 cm (W) x 79 cm (H);

Seat Size: 51 cm (W) x 49 cm (D). The PU foam shall be

molded with density 45 +/- 2 kg/m3. The chair shall have one-

piece armrests, made from high-strength material, scratch-

resistant and weather-resistant. The chair shall be fitted with an

advanced synchronized tilting mechanism having the following

features: 360 degree revolving type; Seat tilt up to 12 degree

and back tilt up to 19 degree; Front pivot mechanism ensuring

feet remain on ground during tilt for better ergonomics; Tilt

tension adjustment control; Minimum 5-position locking system;

Anti-shock back mechanism to prevent sudden impact on user

while releasing the lock; Static seat depth adjustment (approx.

0.5 cm range) with multi-position locking. The base shall be

made of heavy-duty metal / aluminium for stability and long

life.As per Instruction of EIC & User Department.

2 Providing and supplying High back chair with Metal frame 6.00 9292.00 Nos.

work. Upholstered with Artificial leather/Leatherette and

molded PU foam, together with molded seat & back covers.

The back foam should be designed with contoured lumbar

support for extra comfort. Caster of high durability &

hydraulic. The chair should have cylinder with 5 years

warranty. The size of chair 53cm x 79cm (Back side) and

51cm x 49cm (seat size). The PU foam should be molded

with density =45 +/- 2 kg/m3, with One-piece armrests. The

armrests are scratch and weather resistant. The permanent

contact mechanism is designed with 360 degree revolving

type, 12 degree seat tilt 19 degree back tilt, Front pivot for tilt

with feet resting on ground ensuring more comfort, Tilt

tension adjustment, 5 position locking with anti-shock back

mechanism, which should prevent the backrest from

impacting the user when the lock is released, static seat

depth adjustment=0.5 cm 5 position locking.As per

Instruction of EIC & User Department.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

3 Providing and supplying Medium back chair with Metal frame 150.00 7898.20 Nos.

work. Upholstered with changeable fabric upholstery covers

(as per requirement) and molded PU foam, together with

molded seat & back covers. The back foam should be

designed with contoured lumber support for extra comfort.

The chair should have cylinder of high durability & hydraulic

with 5 years warranty. The size of chair 47.5cm x 58cm

(Back side) and 49cm x 48cm (seat size). The PU foam

should be molded with density =45 +/- 2 kg/m3, with One-

piece armrests. The armrests are scratch and weather

resistant. The permanent contact mechanism is designed

with 360 degree revolving type, with pneumatic height

adjustment & 17 degree maximum tilt only & tilt tension

adjustment facility. As per Instruction of EIC & User

Department.

4 Providing and supplying Low back chair for work center & 252.00 5342.90 Nos.

other staff. The seat & back are made of Metal frame work.

Upholstered with changeable fabric upholstery covers (as

per requirement) and molded PU foam, together with molded

seat & back covers. The back foam should be designed with

contoured lumbar support for extra comfort. Caster of high

durability & hydraulic. The chair should have cylinder with

years warranty. The size of chair 45cm x 45cm (Back side)

and 45cm x 43cm (seat size). The PU foam should be

molded with density =45 +/- 2 kg/m3 with One-piece

armrests. The armrests are scratch and weather resistant.

The permanent contact mechanism is designed with

degree revolving type, with pneumatic height adjustment &

17 degree maximum tilt only & tilt tension adjustment

facility.As per Instruction of EIC & User Department.

5 Providing and supplying Visitor or Guest chair. The seat & 58.00 3136.05 Nos.

back are made of 12mm thick hot-pressed plywood

upholstered with changeable fabric upholstery covers (as per

requirement) and molded PU foam, together with molded

seat & back covers. The back foam should be designed with

contoured lumber support for extra comfort. The size of chair

45cm x 38cm (Back side) and 45cm x 43cm (seat size). The

PU foam should be molded with density =45 +/- 2 kg/m3.

The armrests with Leg made with Powder coated MS

with MS structure with required necessary hardware.As per

Instruction of EIC & User Department.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

6 STUDENT BENCH (2 SEATER) TYPE: Steel structure of 350.00 7075.05 Nos.

MS angle & made with using 19mm Thk Plywood (M1).

Structure finished with 1.0 mm Thk decorative laminate

(M24) sheet fixed with necessary fixtures and fastening

(Hardware) (M14) top, Seat & Back rest with MS structure.

STRUCTURE: Made of MS square box section 25 x 25 x

mm welded and one coat of metal primer of reputed made

shall be applied after proper surface finishing and applying

putty on the surface and over it one under coat and one final

coat of superior quality synthetic enamel paint of standard

make and ISI market confirming to IS-2392 shall be applied.

The whole consignment of supply order shall be painted in

per Instruction of EIC & User Department.

7 Table Admin - Providing and supplying Table made with 15.00 46985.20 Nos.

19mm Thk. Plywood(M1) structure as per architect drawing

finished with 1.0 mm Thk. decorative laminate(M24) on

outside portion & 0.8 mm Thk. liner Laminate inside as

specified & approved by architect fixed with necessary

fixtures and fastening (Hardware) (M14) as per architect

drawing. Provide Plastic Computer Desk Table Grommet

Cable Wire Outlet Hole Cover 60mm, Key-board tray, S.S.

legs, Drawers with telescopic roller channels (M15), Handle

(M19) and locking (M16) arrangements with all necessary

fixtures and fastening (M14). Provide Shutters as per

drawing fixed with handle (M19), hinges (M18), magnet

(M14), complete with bidding patties and all required

hardware (M14). Provide footrest as per drawing. All

exposed edges shall be covered with required Teak wood

beading Patti (M4) finished with approved melamine

polishing (M29) work. Complete as per architect's drawing

and as per instruction of architect & engineer in charge.

(Refer drawing)

8 Table Satff - Providing and supplying Table made with 19mm 38.00 15712.57 Nos.

Thk. Plywood(M1) structure as per architect drawing finished

with 1.0 mm Thk. decorative laminate(M24) on outside

portion & 0.8 mm Thk. liner Laminate inside as specified &

approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing.

Provide Plastic Computer Desk Table Grommet Cable Wire

Outlet Hole Cover 60mm, Key-board tray, S.S. legs, Drawers

with telescopic roller channels (M15), Handle (M19) and

locking (M16) arrangements with all necessary fixtures and

fastening (M14). Provide Shutters as per drawing fixed with

handle (M19), hinges (M18), magnet (M14), complete with

bidding patties and all required hardware (M14). Provide

footrest as per drawing. All exposed edges shall be covered

with required Teak wood beading Patti (M4) finished with

approved melamine polishing (M29) work. Complete as per

architect's drawing and as per instruction of architect &

engineer in charge. (Refer drawing)

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

9 Table Satff - Providing and supplying Table made with 19mm 70.00 9686.91 Nos.

Thk. Plywood(M1) structure as per architect drawing finished

with 1.0 mm Thk. decorative laminate(M24) on outside

portion & 0.8 mm Thk. liner Laminate inside as specified &

approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing.

Provide Plastic Computer Desk Table Grommet Cable Wire

Outlet Hole Cover 60mm, Key-board tray, S.S. legs, Drawers

with telescopic roller channels (M15), Handle (M19) and

locking (M16) arrangements with all necessary fixtures and

fastening (M14). Provide Shutters as per drawing fixed with

handle (M19), hinges (M18), magnet (M14), complete with

bidding patties and all required hardware (M14). Provide

footrest as per drawing. All exposed edges shall be covered

with required Teak wood beading Patti (M4) finished with

approved melamine polishing (M29) work. Complete as per

architect's drawing and as per instruction of architect &

engineer in charge. (Refer drawing)

10 Seminar Chair /Chair with desk board Providing and 434.00 3484.50 Nos.

supplying chair with side desk (foldable mechanism) made

with 19 mm Thk MDF board (M7) fixed with M.S structure

armrest fixed with required necessary fixtures and fastening

(Hardware) (M24). Top part of desk finished with 1.00 mm

Thk decorative laminate (M24). Back and side part of desk

Seat & back portion of chair are made of 12mm thk. hot

pressed plywood upholstered with changeable fabric

upholstery covers (as per requirement) and molded PU

foam, together with molded seat & back covers. The back

foam should be designed with contoured lumber support for

extra comfort. The size of chair 45cm x 38cm (Back side)

and 45cm x 43cm (seat size). The PU foam should be

molded with density =45 +/- 2 kg/m3. The armrests with Leg

made with Powder coated MS structure as per architect

required necessary hardware.As per Instruction of EIC &

User Department.

11 Providing and supplying Stool with revolving seat, made from 557.00 2323.00 Nos.

M.S. frame structure, with a (360 degree Swivel) rotatable

seat made of SS304 (no cushion), to rotate freely in all

directions without jamming. All necessary fixtures and

fastening (Hardware) (M14). M.S. frame structure shall be

applied with approved superior quality synthetic enamel paint

confirming to IS-2392. Complete as per architect's drawings

and as per instruction of architects and engineer in charge.

M.S. structure of stool: Square box pipe size 25 x 25 x

1.25mm. As per Instruction of EIC & User Department.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

12 Providing, Supplying & fixing white board having size 180 x 87.00 3484.50 Nos.

120 cm including Aluminum frame, including using 5mm

thick Armstrong single piece magnetic white board, including

using 12mm plywood sheets as supporting on walls, boxing

to conceal columns/beams as per plan, including fixing on

wall with all materials & labour etc. complete as per

instruction of architect & engineer in charge.

13 Providing & supplying Flannel board having size 120 x 90 cm 70.00 2323.00 Nos.

for fixing pictures and notices, made from 8mm thick Water

proof ply (M2) base, including using woolen cloth on front,

0.8 mm Thk. liner Laminate (M25) on back side, teak wood

frame on all four sides finished with Melamine polishing, with

all materials & labor etc. complete as per photograph and as

per instruction of architects and engineer in charge

14 NOTICE BOARD - Specification: Portable Loop Fabric Panel 50.00 1974.55 Nos.

Floor Display Stand. Panel Dimensions: 120cm Wide x

168cm High. Overall Display Height: 203cm. Panel Display

Frame Finishes: Light Gray or Beige. Loop Fabric Colors

Available: (Blue). Casters (Wheels) are included for easy

portability. Set up quickly and easily. Includes stable, snap-

lock feet, for alternative to casters.As per Instruction of EIC

& User Department.

15 Providing and supplying Podium made with using 19mm Thk 5.00 4816.69 Nos.

Plywood (M1) structure finished with 1.0 mm Thk decorative

laminate (M24) sheet approved by architect fixed with

necessary fixtures and fastening (Hardware) (M14). All

exposed edges finished complete as per architect's drawing

and instruction of architect & engineer in charge.

16 Providing and supplying Full height Storage, Low Height 27.00 15532.79 Nos.

Storage unit made with using 19mm Thk. Plywood (M1)

structure and finished with 1.0 mm Thk. decorative

laminate(M24) sheet on outside & and 0.8 mm Thk. liner

laminate(M25) on inside as specified / approved by architect

with fixed with necessary fixtures and fastening (Hardware)

(M14), as per architect drawing. The similar Ply + laminate

made shutter shall be fixed with required handle (M19),

hinges (M18) & Locks (M16) complete with bidding patties

(M4) and all required hardware (M14). Ply shelves removable

Type supported on side teak wood (M5) battens on both

sides. All exposed edges shall be covered with 8 mm Thk.

Teak wood beading Patti (M4) finished with melamine polish

(M29). Complete or as directed as per architect drawing and

as per instruction of architect & engineer in charge. (Up to

lintel level 210 ht.)As per Instruction of EIC & User

Department.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

17 Providing and supplying Full height Storage, Low Height 17.00 8661.76 Nos.

Storage unit made with using 19mm Thk. Plywood (M1)

structure and finished with 1.0 mm Thk. decorative

laminate(M24) sheet on outside & and 0.8 mm Thk. liner

laminate(M25) on inside as specified / approved by architect

with fixed with necessary fixtures and fastening (Hardware)

(M14), as per architect drawing. The similar Ply + laminate

made shutter shall be fixed with required handle (M19),

hinges (M18), magnet (M18) & Locks (M16) complete with

bidding patties (M4) and all required hardware (M14). Ply

shelves removable Type supported on side teak wood (M5)

battens on both sides. All exposed edges shall be covered

with 8 mm Thk. Teak wood beading Patti (M4) finished with

melamine polish (M29). Complete or as directed as per

architect drawing and as per instruction of architect &

engineer in charge. (Up to sill level 90 ht.)As per Instruction

of EIC & User Department.

18 Providing and supplying metal rack made with slotted M.S 32.00 1393.80 Nos.

angle racks with adjustable made with high grade steel IS

5986 for Upright and IS 513D. All the components shall be

thoroughly pre-treated in stage pre treatment process and all

the components shall be painted with epoxy powder coating

and film thickness of minimum 50 microns. Color: Grey color

for beam and base plate; rest all components should be in

dark Grey color. Size: 152 cm x 45 cm x 182 cm. As per

Instruction of EIC & User Department.

19 Providing and supplying computer table with partition made 156.00 7071.01 Nos.

with 19mm Thk. Plywood (M1) structure as per architect

drawing finished with 1.0 mm Thk. decorative laminate (M24)

on outside portion & 0.8 mm Thk. liner Laminate inside as

specified & approved by architect with fixed with necessary

fixtures and fastening (Hardware) (M14) as per architect

drawing. Provide Plastic Computer Desk Table Grommet

Cable Wire Outlet Hole Cover 60mm, Key-board tray, S.S

legs fixed with all necessary fixtures and fastening (M14). All

exposed edges shall be covered with required Teak wood

beading Patti (M4) finished with approved melamine

polishing (M29) work. Complete as per architect's drawing

and as per instruction of architect & engineer in charge.

(Refer drawing)

20 Providing and fixing Projector screen 244 x 300 cm including 12.00 17422.50 Nos.

Tripot as directed by engineer in charge with necessary tools

& Plants.As per Instruction of EIC & User Department

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

21 Providing and fixing Projector Screen of size 400 x 600 cm, 2.00 23230.00 Nos.

heavy duty wall mounted / ceiling mounted, suitable for

seminar hall having seating capacity of 200 trainees,

complete with frame, accessories, fixing arrangement, as

directed by Engineer-in-charge, including all tools, plants and

labour. As per Instruction of EIC & User Department

22 Providing, supplying, installing and commissioning Laser 2.00 261337.50 Nos.

Projector of minimum 6000 ANSI Lumens, WUXGA / Full HD

resolution, suitable for projection on 400 x 600 cm screen in

seminar/placement hall having seating capacity of

trainees, including ceiling mount, necessary HDMI/power

cabling, alignment, testing and commissioning, complete as

directed by Engineer-in-charge.

23 Providing & Supplying Projector - 4000 ANSI Lumens 1024 12.00 17422.50 Nos.

X 768, 4:3 with 3000 pixels video signal SDTV(480I),

EDTV(480p), image size 27" X 300" with remote control,

Bluetooth, Wi-Fi, HDMI, ultra fast input, 240Hz refresh rate

and USB Type-C Connectivity functioning and attachable

with PC, Laptop for display with necessary wiring, Cabling in

ceiling and clamping, hanging, etc., complete as directed by

Engineer in Charge

24 Providing and supplying clothes cutting & press table made 10.00 14188.48 Nos.

with good quality wood and top finished with approved

melamine polishing work (M29) and 19mm Thk plywood (M1)

for drawers finished with 1.0 mm Thk decorative laminate

(M24) on outside portion and 0.8 mm Thk liner laminate

inside as specified and approved by architect. Provide two

no. of Drawers with telescopic roller channels (M15), Handle

(M19) and locking (M16) arrangements with all necessary

fixtures and fastening (M14). Whole table made with

required size of M.S. frame structure finished with approved

superior quality synthetic enamel paint of standard metal and

ISI markets confirming to IS-2392 shall be applied. Complete

as per architect's drawings and as per instruction of

architects and engineer in charge. (Refer drawing) M.S.

structure of table - 50 x 50 mm square box section legs.

Supportive framing work 25 x 50 mm box Section and 25 x

25 'L' section. Table Size: 180 x 90 x 90 cm. As per

Instruction of EIC & User Department

25 Providing and supplying Adjustable Drawing and Drafting 69.00 6969.00 Nos.

Table with 90 W x 65 D cm Surface, Silver Frame with Birch

top. Include a full range of adjust-ability, including increments

up to 45 degrees of angle adjustment, plus 30 cm of height

adjustment. All adjustments are easily accessible via over

sized thumb screws. A sturdy steel frame and extra large

rubber feet ensure a supremely stable work surface. This

premium adjustable drawing and drafting table is available in

silver powerboat frame with a birch top. As per Instruction of

EIC & User Department

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

26 Providing and supplying Main Table with side unit table 2.00 61584.75 Nos.

made with 19mm Thk. Plywood (M1) structure as per

architect drawing finished with 1.0 mm Thk. decorative

laminate (M24) on outside portion & 0.8 mm Thk. liner

Laminate inside as specified & approved by architect fixed

with necessary fixtures and fastening (Hardware) (M14) as

per architect drawing. Provide Plastic Computer Desk Table

Grommet Cable Wire Outlet Hole Cover 60mm, Key-board

tray, S.S. legs, Drawers with telescopic roller channels

(M15), Handle (M19) and locking (M16) arrangements with

all necessary fixtures and fastening (M14). Provide Shutters

as per drawing fixed with handle (M19), hinges (M18),

magnet (M14), complete with bidding patties and all required

hardware (M14). Provide footrest as per drawing. All

exposed edges shall be covered with required Teak wood

beading Patti (M4) finished with approved melamine

polishing (M29) work. Complete as per architect's drawing

and as per instruction of architect & engineer in charge. size

as per design Drawing (Refer drawing)

27 TWO SEATER SOFA SET: Providing and supplying sofa (2 6.00 13938.00 Nos.

seater) made with using 19mm Thk. Plywood (M1) structure

frame with S.S. legs required necessary support fixed with

necessary fixtures and fastening (Hardware)(M14). It shall

be covered with 32 Density PU foam(M22) with required

Thickness as per design in seat & back and handle portion;

this should be again covered with 14 mm thick PU foam

(M22) with Madarpat cover on it & upholstered fabric(M26) or

leather of suggested & approved by architect finished with

seat, back & all visible side as per architect drawing.

Complete as per architect's drawing and as per instruction of

architect & engineer in charge. (Refer drawing)

28 Providing and supplying sofa (3 seated) made with using 4.00 20907.00 Nos.

19mm Thk. Plywood (M1) structure frame with S.S. legs

required necessary support fixed with necessary fixtures and

fastening (Hardware)(M14). It shall be covered with

Density PU foam(M22) with required Thickness as per

design in seat & back and handle portion; this should be

again covered with 14 mm thick PU foam(M22) with

Madarpat cover on it & upholstered fabric(M26) or leather of

suggested & approved by architect finished with seat, back &

all visible side as per architect drawing. Complete as per

architect's drawing and as per instruction of architect &

engineer in charge. (Refer drawing)

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

29 Providing and supplying Centre Table/Corner Table/Tipoi 3.00 2557.32 Nos.

with Glass top made with 19mm Thk. Plywood (M1) finished

with 1.0 mm Thk. decorative laminate sheet (M24) specified

and approved by architect & fixed with necessary fixtures

and fastening (Hardware) (M14) inclusive of approved

melamine polishing (M29) work. Top part of center Table

covered with 8 mm Thk. toughened Glass (M27) with

Polished Edges. Complete as per architect's drawing and as

per instruction of architect & engineer in charge. size as per

(Refer drawing)

30 Providing Visitor's group seating of three people made from 10.00 6969.00 Nos.

perforated S.S. CRC sheet (C-201), steel plate with 1.5mm

thick. Bottom: made from 20mm x 40mm S.S. CRC tubes as

per sample finished with stainless steel chrome plated as

specified in specification sheet and as approved by Engineer-

in-charge.

31 Providing and supplying powder coated M.S. Book Shelf as 10.00 3484.50 Nos.

shown in the image. Size: 180 (H) x 75 cm (W). As per

Instruction of EIC & User Department

32 4K UHD Display. Inbuilt Android System. Minimum 8GB 4.00 58075.00 Nos.

RAM / 64GB Storage. Inbuilt Speaker. Wi-Fi & LAN Support.

Wall Mount Kit. As per Instruction of EIC & User Department

33 Compactor storage - (4 Twin Bay) Specification: Standard 3.00 16665.00 Nos.

company made metal compactor, equivalent to Godrej,

Neelkamal, Kompress etc. Size of single bay: 90-91.5 x 190-

215 x 45-50cm (LxHxW) each. No. of shelf per bay: with built-

in lateral file holder, 4 pieces of lateral shelf and 1-piece

base shelf to provide 5 tier filing storage. (Max loading

capacity: 50kgs per shelf). Cold Rolled Steel plate for the

whole Bay's body and shelves. (0.7mm) Square Hollow

Section and steel Flat Bar for the track / Rail. Cold Rolled

Steel Bearing and Bearing Base. Finishes: Light Gray or

Beige powder coated. Drive type opening mechanism.

Centralized locking arrangement to be included. As per

Instruction of EIC & User Department

34 Providing and supplying Library table, Table top made with 20.00 10773.67 Nos.

using 19mm Thk. Plywood (M1) finished with 1.0 mm Thk.

decorative laminate (M24) sheet approved by architect fixed

with necessary fixtures and fastening (Hardware) (M14).

Whole table made with required size of M.S. frame structure,

finished with approved superior quality synthetic enamel

paint of standard make and ISI markings confirming to IS-

2392. Top portion of table all edges shall be covered with

required Teak wood beading Patti (M4) finished with

approved melamine polishing (M29) work. Complete as per

architect's drawings and as per instruction of architect &

engineer in charge. (Refer drawing) Table size: 135 x 90 x

75(H) cm. As per Instruction of EIC & User Department

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

35 A-Shape / Roof Top Design. Double Side Display. Slanted 5.00 4065.25 Nos.

Panels for Easy Reading. Open Front Access for Quick

Newspaper Placement. Frame: Heavy Duty Mild Steel (MS).

Body Panels: Powder Coated MS Sheet. Finish: Anti-Rust

Powder Coated (Grey / White / Black). As per Instruction of

EIC & User Department

36 DIAS TABLE (Size: 3500mm x 600mm) Providing and fixing 3.00 26714.50 Nos.

35mm thick plywood top with 4mm veneer with good quality

of polish finish with 38mm vertical legs made by 18mm thick

plywood and exposed edge finish with wooden bidding with

polish finish in approved shade. The Apron should be made

from plywood with laminate finish as per detail drawing, with

wooden bidding patti on nylon castor with lock and telescopic

channel should be made from 18mm plywood with 4mm

veneer outside and 0.8mm inside laminate finish. The Table

top shall have cable manager. Including all materials and

labour etc. complete as per detail drawing and instruction of

engineer-in-charge.

37 Providing and supplying Modular Conference table as per 70.00 6969.00 Nos.

layout - 840 mm wide: made from two layers of Flat

Laminated Plywood Panels of 19mm TH Plywood (M1)

structure finished with 1mm TH decorative laminate(M24)

sheet approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing. Top

portion of conference table all edges shall be covered with

required half round Teak wood beading Patti (M4) finished

with approved melamine polishing (M29) work. The table

shall also have provision for carrying wires & mounting

electrical plug point, switches & mic etc. Complete as shown

in architect drawing and as per instruction of architect &

engineer in charge. Table Size: 120 x 75 x 75 cm (each

module, total 25 modules) & 4 modules of 75cm radius

quarter circles, as shown in drawing. As per Instruction of

EIC & User Department

38 Providing and Supplying 55" 4K Ultra HD Smart LED Display 8.00 34845.00 Nos.

with wall mount bracket, minimum 2 HDMI & 2 USB ports, Wi-

Fi enabled, 20W speaker output. As per Instruction of EIC &

User Department

39 Providing and Supplying Heavy Duty Plastic Dustbin of 80 100.00 580.75 Nos.

Liters capacity made from UV Stabilized HDPE material with

hinged lid and strong base, suitable for workshop use. As

per Instruction of EIC & User Department

40 Providing and supplying Roller Blinds assemblies are to be 29.00 854.46 Sqmt

supplied & installed in all windows with great precision. It

should be water resistant and fitted on aluminum head rails

duly powder coated and fitted with stainless steel drive rods.

Manual operated and should have ISI mark. Complete or as

directed as per architect & engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

41 Providing and supplying Full Height Storage unit made with 12.00 15532.79 Nos.

using 19mm Thk. Plywood (M1) structure and finished with

1.0 mm Thk. decorative laminate (M24) sheet on outside &

and 0.8 mm Thk. liner laminate (M25) on inside as specified /

approved by architect, fixed with necessary fixtures and

fastening (Hardware) (M14), as per architect drawing. The

similar Ply + laminate made shutter shall have 6mm. thk.

Glass, fixed with required handle (M19), hinges (M18),

magnet (M18) & Locks (M16) complete with bidding patties

(M4) and all required hardware (M14). Ply shelves removable

Type supported on side teak wood (M5) battens on both

sides. All exposed edges shall be covered with 8 mm Thk.

Teak wood beading Patti (M4) finished with melamine polish

(M29). Complete or as directed as per architect drawing and

as per instruction of architect & engineer in charge. (Size:

1200mm x 450mm x 2100mm)As per Instruction of EIC &

User Department.

42 Features: Convenient way for storing keys with door lock. 8.00 2903.75 Nos.

Door Cover with locking method for security purpose with

glass (as per instruction of architect & engineer in charge).

Size: 60 x 70cm. As per Instruction of EIC & User

Department.

43 6mm clear acrylic sheet with open able shutter and require 6.00 5807.50 Nos.

anodized aluminum framing with required fixers and height

as per requirement. Provide 4 way nylon caster wheels. As

per Instruction of EIC & User Department.

44 Mirror panel - Size - as per requirement. Providing and fixing 6.00 3484.50 Nos.

bevelled edge Mirror with led light of superior glass mounted

8mm thick MR grade plywood sheet and fixed to wooden

plugs with C.P. brass screws and washers etc. As per

Instruction of EIC & User Department.

45 Providing and fixing wooden trial room (changing room) 1.00 34845.00 Nos.

made from 19 mm thick plywood structure (M1) finished with

1.0 mm thick decorative laminate on both sides, including

door with curtain/hinged shutter, necessary hardware fittings

(hinges, handle, lock), and proper ventilation. The trial room

shall include full-size mirror (minimum 5 mm thick), cloth

hanger provision, and LED light fitting inside. All exposed

edges shall be finished with PVC/teak wood beading and

polished with approved finish. Complete as per drawing and

as directed by Engineer-in-charge. Standard Size

(Recommended) Width: 3 ft - 4 ft; Depth: 3 ft - 4 ft; Height:

ft As per Instruction of EIC & User Department.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

46 Providing and fixing 12.5 mm thick gypsum plasterboard 105.00 639.33 Sqmt

false ceiling suspended from the RCC slab with a hot-dip

galvanized steel framework consisting of perimeter channels,

intermediate channels, ceiling sections, GI hangers, clips,

expansion fasteners, self-drilling screws, joint tape, and

jointing compound, complete with finishing to achieve a

smooth, level surface ready for primer and paint. The work

shall include all cut-outs for light fittings, air-conditioning

diffusers, fire-fighting devices, access panels, and all

necessary accessories, complete in all respects, conforming

to relevant Indian Standards and approved manufacturer

specifications. As per Instruction of EIC & User Department.

47 Providing and fixing PVC plain/printed false ceiling 1650.00 1161.50 Sqmt

comprising 600 mm x 600 mm x 3 mm thick PVC panels

fixed in an anodized aluminium grid system consisting of

mm x 25 mm T-sections (minimum 1.0 mm thick/19 gauge)

forming a 600 mm x 600 mm grid. The framework shall be

suspended from the RCC slab using G.I. hooks, G.I. wire or

6 mm M.S. rods at required spacing to maintain proper

alignment and level. The perimeter shall be supported with

25 mm x 25 mm aluminium L-angle fixed to the wall with

suitable fasteners. The work shall include all necessary

accessories, cutting, wastage, scaffolding, labour, fixtures

and fittings, complete as per manufacturer's specifications

and the directions of the Engineer-in-Charge.

48 Providing and fixing full-height modular laboratory partition 750.00 1626.10 Sqmt

consisting of powder-coated aluminium extruded sections,

8/10 mm thick toughened safety glass and 12 mm HPL

compact laminate/pre-laminated solid panels, complete with

aluminium doors, SS-304 hardware, hydraulic door closer,

mortise lock, silicone sealant, EPDM gaskets, and all

necessary fittings and accessories, as per approved

drawings and manufacturer's specifications, complete in all

respects. As per Instruction of EIC & User Department.

49 (7.5 mtr x 2.1 mtr x .30 mtr) for seminar hall/ conference 2.00 74336.00 Nos.

room - Providing & fitting wooden stage made from 18mm

thick plywood skeliton structure of MR grade. The Top &

vertical surfaces shall be covered with 18mm thick plywood.

The Aprons shall be finish with 1.0mm thick laminate in

approved shade. The rate shall be Including all materials and

labour etc. complete as per detail drawing and instruction of

engineer-in-charge.

50 (Size: 3m x 2m x .30m) - Providing & fitting wooden stage 36.00 25553.00 Nos.

made from 18mm thick plywood skeliton structure of MR

grade. The Top & vertical surfaces shall be covered with

18mm thick plywood. The Aprons shall be finish with 1.0mm

thick laminate in approved shade. The rate shall be Including

all materials and labour etc. complete as per detail drawing

and instruction of engineer-in-charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

51 Providing, Supplying, Installing, Testing & Commissioning 20.00 51106.00 Nos.

(SITC) of 2.0 Ton, 5-Star Rated, DC Inverter Split Air

Conditioner complete with 100% copper condenser and

evaporator, R-32 refrigerant, wall-mounted indoor unit,

weatherproof outdoor unit, wireless remote control, copper

refrigerant piping (minimum 3 metres), insulated drain pipe,

interconnecting cables, outdoor unit stand, all accessories,

testing, commissioning, and satisfactory operation, complete

in all respects as per manufacturer's specifications and

relevant Indian Standards. As per Instruction of EIC & User

Department.

52 Providing and fixing decorative wall paneling on the wall of 100.00 14518.75 Sqmt

the Class-I Officer's office using 12 mm thick BWP (Boiling

Water Proof) grade plywood conforming to IS:303, fixed over

a framework of well-seasoned hardwood battens of size

mm x 25 mm at suitable spacing securely anchored to the

wall with approved fasteners. The exposed surface shall be

finished with 1.0 mm thick decorative laminate (approved

make such as Greenlam, Century, Merino or equivalent) of

approved shade and texture. All exposed edges shall be

finished with 2 mm matching PVC edge banding. The rear

face of the plywood shall be coated with approved wood

preservative/anti-termite treatment before fixing. The work

shall include providing decorative grooves (V-grooves) as

per approved design, necessary mouldings, stainless steel

screws, adhesives, concealed fixing accessories, cutting,

fitting and finishing complete. The item shall also include a

floating display shelf made from 18 mm BWP plywood

finished with 1.0 mm laminate on all exposed faces,

complete with concealed heavy-duty brackets/supports

capable of carrying decorative items, trophies, certificates or

books. Shelf size shall be as shown in the approved

drawings (generally 250-300 mm wide) and all exposed

edges shall have 2 mm PVC edge banding. The completed

work shall be smooth, level, properly aligned and finished in

all respects, including all materials, labour, hardware,

scaffolding, transportation, wastage, taxes (excluding GST),

and any incidental work required for satisfactory completion,

as directed by the Engineer-in-Charge.

53 Wooden wall panelling - Providing and fixing Wooden wall 99.98 3984.45 Sqmt

panelling using 12mm thick BWP plywood with back side

anodized aluminium pipe framing, Aluminium pipe of 50mm

x 38mm size with 1mm thickness, 12mm thick Plywood

covered with 4mm thick veneer with melamine polish All

work includes with required all necessary hardware and

wooden battens, all wooden and veneer edges finish with

melamine polish. Complete as per directed by Architect and

Engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

54 Providing and fixing wall clock of the desired shape and 30.00 755.48 Nos.

design as seletced by Engineer-in-charge. Wall Clock. As

per Instruction of EIC & User Department.

Total Rs.

Rupees Two Crore ThirtyThree Lakh FiftyEight Thousand Nine Hundred SixtyEight and Paisa One

I / We / am/are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rates mentioned above. Amount of my/our

tender Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have

been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Modasa Modasa