GENERAL RM 2025-2026-RC 2 Phase 2 Cluster2 Zone 5 One Year Running Contract for various PWD Roads under Road section Manjeri in Malappuram District 5 no of Road stretches for a length of 18.65 km-Malappuram and Manjeri LAC-General Civil Work

Amount

Appendix A - Initial Rectification

OD43365/2024-2025:Removing the old existing vinyl sticker works on the Display board of Running contract and replacing with new vinyl sticker ,including lettering symbols and transporting to site etc. as per approved drawing and direction of the engineer

Appendix B- Preventive Maintenance

OD43374/2024-2025:Filling up potholes with bituminous ready mix compound (25kg) and compacting by ramming to get a compact surface including of cost of material, laying charges, transportation to site etc complete Rate is arrived for a bag of 25kg

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

OD43375/2024-2025:Conducting and reporting routine inspections for the entire length of the project road at a frequency of 7 days through out the agreement period of the running contractors directed by the departmental officer at site.

Appendix C - Pre-monsoon Works

OD43376/2024-2025:Supplying and laying bituminous ready mix pot hole repair compound for filling up pot holes after removing the failed material including clearing and trimming of sides, laying to level and grade by ramming and compacting..etc of 25 Kg bag.

OD43378/2024-2025:Cutting of grass and light jungle using bush cutter with all expense

OD43379/2024-2025:Engaging woodcutter with tools and accessories required for cutting trees,branches of trees of any girth overhanging above any structures including stacking of serviceable materials and disposal of unserviceable materials without any damages to nearby structures etc complete

OD43380/2024-2025:Engaging Man Mazdoor for lifting , removing and replacing the cover slabs for clearing the chocked culvert and drains, Helping wood cutter for cutting standing and fallen trees, assisting revenue team for fixing boundaries of the road, Clearing road land by uprooting rank vegetation, grass, bushes, shrubs..etc and other charges.

OD43382/2024-2025:Filling with granular material in the areas where the soil is of slushy in nature to achieve adequate bearing capacity and as drainage layer laid in line and level compacted with plate vibrator etc complete as per technical specification and as directed by the Engineer in charge

OD142246/2024-2025:Filling up low lying area with quarry muck ,spreading in layers ,levelling top at site and consolidating by ramming etc complete

OD142244/2024-2025:Engaging Tipper

OD142245/2024-2025:Engaging JCB for removing the obstruction such as unserviceable soil and dumped earth along shoulder side of carriageway and clearing the road surface for traffic worthy etc complete

Appendix D- Proactive Maintenance with Emergency Works

OD43366/2024-2025:Engaging JCB for removing the obstruction such as unserviceable soil and dumped earth along shoulder side of carriageway and clearing the road surface for traffic worthy etc complete

OD43367/2024-2025:Engaging Tipper (5 cum capacity) for loading and unloading materials from roadway cutting etc complete

3.13.1.B:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. Ordinary soil - Mechanical Means - (Depth upto 3 m)

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

OD43368/2024-2025:Dry Rubble with Departmental stone without concrete levelling coarse masonry with goof quality blasted material including packing to compactness to lines and levels ,complete as per direction of Departmental Officers at site ( Derived from 60.7.1 ,labour charge only)

OD43369/2024-2025:Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials ,labour charges etc. complete as per direction of Departmental officers at site ( derived from 60.7.1)

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20 (Without formwork)

8.8:Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a)

55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.

55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.

55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface.

OD43370/2024-2025:Engaging Special Mazdoor for cutting and removing fallen trees and standing trees including all charges etc.complete

OD43372/2024-2025:Engaging woodcutter with tools and accessories required for cutting trees,branches of trees of any girth overhanging above any structures including stacking of serviceable materials and disposal of unserviceable materials without any damages to nearby structures etc complete

OD43373/2024-2025:Engaging Man Mazdoor for lifting , removing and replacing the cover slabs for clearing the chocked culvert and drains, Helping wood cutter for cutting standing and fallen trees, assisting revenue team for fixing boundaries of the road, Clearing road land by uprooting rank vegetation, grass, bushes, shrubs..etc and other charges.

55.16:Providing and fixing guard post Providing and fixing guard post of size 200mmx200mm, 1400mm long, 800mm above ground level and 600mm below GL. casted in M20 Grade concrete reinforced with 4 nos of 8mm dia longitudinal bars and 6mm dia stirrups @ 100mm c/c, firmly fixed in position by means of foundation of size 0.5mx0.5mx0.7m in M15 grade concrete below ground level including painting 2 coats on exposed surface with synthetic enamel paint in alternate white & black band 20cm wide

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm

8.5:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

55.38a:Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on Structural Steel c section vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of structural steel c section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3.

OD142243/2024-2025:PVC Weep Holes-Providing weep holes using 75 mm dia PVC pipes working pressure 4 kg sq cm including cost of materials ,conveyance ,labour charges etc complete (Derived from 60.6)

SHABEER K.K. (BID ID -2207321)

Bidder Name

SHABEER K.K.

P P ABDUL KABEER