REPAIR AND MAINT OF E/M INFRASTRUCTURE AT AF STN MANDORE UNDER AGE E/M, GE (AF) NO 02 JODHPUR

Amount

Excavating in trenches, not exc 1.5 metre wide and not exc 1.5 metre in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. laying cables, pipe lines, etc. not exc 10 Sqm on plan & not exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil/material to a distance not exc 50 metre and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified and as directed.

M&L for sand filling under floors and similar locations including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed. Notes : (i) For the purpose of payment, only consolidated thickness shall be measured.

M&L for stone Slab 40 to 50 mm thick rough dressed jodhpur stone patties/ slab cover in trenches for protection of cable 25 to 30 CM wide and thickness not less than 50 mm in length lay dry abutting each other with gap between adjacent slab not exceeding 10 mm over sand cushioning.

Taking out old defective LT cable XLPE/PVC sheathed 1100 volt grade heavy duty armoured with aluminium conductor from tranch, shifting sericable cable 4 core 16 Sqmm for lelaying or taking the unserviceable cable asa a credit complete all as specified & directed. Note: Excavation and earth work shall be measured & paid separately.

All as per serial item No. 6.00 here-in-before but cable size 3.5 core 25 Sqmm

All as per serial item No. 7.00 here-in-before but cable size 3.5 core 35 Sqmm

All as per serial item No. 7.00 here-in-before but cable size 3.5 core 120 Sqmm

All as per serial item No. 7.00 here-in-before but cable size 3.5 core 400 Sqmm

Supply, laying, jointing and testing LT XLPE insulated screened, bedded, errazzo steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Notes :- (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

All as per serial item No. 11.00 here-in-before but cable size 25 Sqmm 3.5 core

All as per serial item No. 11.00 here-in-before but cable size 35 Sqmm 3.5 core

All as per serial item No. 11.00 here-in-before but cable size 120 Sqmm 3.5 core

All as per serial item No. 11.00 here-in-before but cable size 400 Sqmm 3.5 core

M&L for Galvanized iron tubing, 80mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete all as specified & directed. Note :- Excavation & earthwork shall be measured & paid for separately.

All as per serial item No. 16.00 here-in-before but bore size 50 mm.

All as per serial item No. 16.00 here-in-before but bore size 40 mm.

Notes for LT panel : (i) LT panel base frame shall be grouted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate. The base shall be 60cm height from the nearest road level/floor level or as directed. (ii) All incoming MCCB shall be connected through MCCB spreaders with incoming bus bar and incoming cable shall be connected with incoming bus bar. (iii) Drawing of LT Panel shall be got approved well in advance from GE before fabrication of LT Panel. (iv) The quoted rate shall deemed to include supply & provision of 65mm lock with 2 keys. Make of Lock :- Godrej / Harrison / Link. (v) Cost of platform, MCCB spreaders, cable glands, locking arrangement with lock and key and any minor addition/alteration if required at site (the decision of GE will be final and binding regarding extent to which the change can be considered as minor addition/alteration) shall be deemed to be included in the quoted rates.

Notes for LT panel : (i) LT panel base frame shall be grouted in PCC (1:2:4) type B-1 using 20mm graded stone aggregate. The base shall be 60cm height from the nearest road level/floor level or as directed. (ii) All incoming MCCB shall be connected through MCCB spreaders with incoming bus bar and incoming cable shall be connected with incoming bus bar. (iii) Drawing of LT Panel shall be got approved well in advance from GE before fabrication of LT Panel. (iv) The quoted rate shall deemed to include supply & provision of 65mm lock with 2 keys. Make of Lock :- Godrej / Harrison / Link. (v) Cost of platform, MCCB spreaders, cable glands, locking arrangement with lock and key and any minor addition/alteration if required at site (the decision of GE will be final and binding regarding extent to which the change can be considered as minor addition/alteration) shall be deemed to be included in the quoted rates.

M&L for PCC 1:2:4 type B2 using 40 mm graded crushed stone aggregate in foundations, copping, floor surface etc., complete all as specified & directed.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and as directed.

S&F in replacement HERITAGE LED Post Ideal to lit up parks, garden ways and heritage sites 20 Watts complete all as directed. (Make :Crompton cat pat no -LPTH-20-CDL or eqult Havells/Bajaj)

S&F in replacement of Inverted Tripod type LED bollard light 10 watt with soft light disturbution complete all as directed. (Make :Crompton cat pat no -LBLSN-10-CDL or eqult Havells/Bajaj)

S&F in replacement MCCB, 63 Amps, 3 pole, 415 volts, 50 HZ, rupturing capacity 16KA, connection with proper size of thimbles complete all as specified and directed.

S&F in replacement MCCB, 160 Amps, 4 pole, 415 volts, 50 HZ, rupturing capacity 25KA, connection with proper size of thimbles complete all as specified and directed.

S&F in replacement MCCB, 250 Amps, 4 pole, 415 volts, 50 HZ, rupturing capacity 36KA, connection with proper size of thimbles complete all as specified and directed.

S&F in replacement Change over main switch, on load, four poles, 250 Amps, 415 Volts, 36 KA, 50 Hz, with enclosure, fixed in the existing LT panel board/ sheet metal enclosure including connecting up incoming/ outgoing cables with suitable lugs and testing complete all as specified and as directed.

RAMA REFLECTION INDIA

KAVYA ENTERPRISES