SPL REPAIR TO DINING HALL OF HQ COY OF 24 GUARDS (17 GRENADIERS) UNDER AGE (I) POKARAN

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M/L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.18 sqm n exc 0.36 sqm in floors/vertical surfaces etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6 laying floor finishesed complete all as specified and directed by Engr-in-Charge.

M&F glazed ceramic coloured tiles (300mmx 450mmx7 mm) in vertical surfaces jointed in neat cement slurry and pointed in white cement. Incl cutting the tiles to the required size whereven required incl mitring the corners etc over 10 mm thick backing coats of cement plaster in CM (1:4) complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frame existing doors/windows/ventilators (without taking off shutters and guard bars) of n exe 1.5 sqm complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frame existing doors/windows/ventilators (without taking off shutters and guard bars) of exe 1.5 sqm & n. exc 4 sqm etc complete all as specified and directed by Engr-in-Charge.

S&F standard aluminum sections of any Type as in doors, windows, ventilators, partitons etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directe Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate complete all as specified and directed by Engr-in-Charge.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and directed by Engr-in-Charge.

Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and directed by Engr-in-Charge.

S&F for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed by Engr-in-Charge.

M&L for IInd class Hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joint complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made plain framed, panelled shutters (two panels) With lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S & F, 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.

S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L preparation of new steel surface and applying two coats of synthetic enamel paint ovre a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for machine cut Granite (of any type) t 20mm thick for kitchen platform over and including bedded and jointed with grey cement slurry/backing coat 15 mm thick in CM (1:4) and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including dismantling of stone slab complete all as specified and directed by Engr-in-Charge.

M & L for Machine cut kota stone slab flooring 20-25mm thick for window cill, jambs and sofits over and including cement screed base 15 mm thk in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including dismantling of stone slab

M & L for Rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-Charge.

S&F Butt hinges,100mm mild steel with medium weight pin complete all as specified and directed by Engr-in-Charge.

S&F aluminium handles cast type anodised 150mm size complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size complete all as specified and directed by Engr-in-Charge.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 300mm length complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm size complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces by applying two coats of synthetic enamel painting over one coat of pink primer on wooden surfaces exceeding 10 cm width or girth including preparation of new surfaces complete all as specified and directed by Engr-in-Charge.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, as in floors or fixed to walls 75 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed to walls 110 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet 75 mm complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/stone work or concrete surfaces and finished even and smooth without using extra cement on walls complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick cement plaster in CM 1:6 water proofing compound @ 3% by the weight of cement on brick/ stone surfaces finished fair and even without using extra cement etc complete all as specified and directed by Engr-in-Charge.Note : Water proofing compound and will be measured and paid separately.

M&L for preparation of new plastered surface of wall and applying Two coat of oil bound distemper over the alkali resistance priming paint primer over 1.5 to 2mm thick wall care putty complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces on walls, chajjas,filling of hair line cracks with white cement and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of acrylic primer in approved shade and as per manufacturer's instructions including necessary scaffolding complete all as specified and directed by Engr-in-Charge..

M&L for preparation of old painted surfaces including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss; efflorescent salts & trading oil, greasy spots and applying two coat of lime white wash on the ceiling etc complete all as specified and directed (Rate inclusive of necessary scaffolding, trestels, ladders, cradles etc required for execution of work) complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment of old painted wall surfaces and applying two coats of oil bound distemper over a coat of 1.5 to 2 mm thick wall care putty of approved make & shade on walls and other places complete all as specified and directed by Engr-in-Charge.. (Rate including the required scaffolding & other accesories required for painting)

M&L for preparing old painted surfaces by washing, rubbing down and painted surfaces and applying a two coat of Acid resistatent paint of walls complete all as specified & directed by Engineer-in-charge.

Complete removal of existing water proofing treatment incl bedding if any n exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land complete all as specified and directed.

Demolition of concrete of any description and in any position (PCC Padding over roof) complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:2:4 type BO using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 50 mm as per the requirements all as directed by Engr-in-Charge.

M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC complete all as specified and directed by Engr-in-Charge. (WPC will be measured and paid separately as supply only)

Supply only integral Waterproofing compound complete all as specified and directed by Engr-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 Ltr/Sqm by forced all as specified and as directed complete all as specified and directed by Engr-in-Charge.

S&F in repair anodised aluminium tubular curtain rod with fixing brackets,stops, rollers etc, 20mm dia, complete all as specified and directed by Engr-in-Charge.

Demolition of stone masonry built in cement or cement lime mortar all as specified and directed.

M&L for squared rubble walling, Jodhpur type brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for squared rubble walling, Jodhpur type brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge. but except stone

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints with max depression on face from straight edge held against the dressed surfaces not exc 40 mm as specified of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.Note: Hidden portion of stone masonry shall not be hammer dressed complete all as specifed and directed. .

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) of thickness 100 mm as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for even spreading of 25mm thick layer of sand cushioning incl watering & consolidation complete all as specified and directed by Engr-in-Charge.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size conforming to IS 15658-2006 of M-35 grade complete all as specified and directed by Engr-in-Charge.

M&L For Type B1 1:2:4 (20 mm graded aggregate) Providing, cement concrete in kerbs of mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends and fittings etc complete all as specified and directed by Engr-in-Charge.

Taking down carefully existing point wiring of any description light, fan,sockets,bells etc) complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the disturbed surfaces, walls, floors etc. complete all as specified and directed by Engr-in-Charge.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed by Engr-in-Charge.

M&L point wiring complete with 1.5 Sqmm single core PVC insulated cable 1100 Volts grade multistranded copper conductor drawn through in PVC Casing and Capping on surface stone/brick, masonry walls, roofs floors etc including MS terminal boxes fabricaterd out of 1.12mm thick MS sheet sunk type / surface type and laminated top sheet of 2mm thick for housing switches sockets, regulators etc including provn of 1.5 sqmm dia copper conductor for earth wire connected to common dolly One light point / Fan point / Exhuast Fan point controlled by one 5 Amps One way switch complete all as specified and directed by Engr-in-Charge.

All as per Item No. 57 but for one 3 pin 5/6 Amps switch socket outlet on same board

All as per Item No. 57 but for one 3 pin 5/6 Amps switch socket outlet on independent board

All as per item No.57 above but wiring with 4.0 Sq mm and 2.5 sqmm for earth continuity for 3 pin 15/16 Amps switch socket combination

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed.

M&L switch piano flush type single pole one way 15 Ampscomplete all as specified and directed by Engr-in-Charge.

M&L Switch Socket Combination outlet, multipurpose, 2 pin 5 amps/3 pin 5 amps controled by one switch 5 amps, flush type complete all as specified and directed by Engr-in-Charge.

M&L Universal socket outlet with shutter, 5/15 amps controlled by one switch 15 amps, flush type complete all as specified and directed by Engr-in-Charge.

S&F Ceiling fan regulator Stepped type, 120 W-2 module AC 240 V complete all as specified and directed by Engr-in-Charge.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed by Engr-in-Charge.

supply and fix LED Lamp Retro fit type 9 watts 230 V and complete all as specified and directed by Engr-in-Charge.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais complete all as specified and directed by Engr-in-Charge.

S&F Sheet Modular metal enclosure DB TPN 415 Volts 4 Way double door type with 200 Amps busbar for fixing of MCBs complete all as specified and directed by Engr-in-Charge.

S&F Sheet Modular metal enclosure DB SPN 240 Volts 8 Way double door type with 200 Amps busbar for fixing of MCBs complete all as specified and directed by Engr-in-Charge.

S&F MCB Triple pole and neutral, 63A, 415 Volts AC complete all as specified and directed by Engr-in-Charge.

S&F MCB Single pole and neutral, 40A, 415 Volts AC complete all as specified and directed by Engr-in-Charge.

S&F MCB Single pole, 5-32A, 415 Volts AC complete all as specified and directed by Engr-in-Charge.

Supply and drawn sub main wiring with two runs of 4 Sq mm single core PVC insulated unsheathed cable upto and including 1100 volts grade with multistranded copper conductor drawn through in PVC Casing and Capping on surface walls, floors etc including one run of 2.5 Sqmm PVC insulated copper conductor for earth continuity wire complete all as specified and directed by Engr-in-Charge.(Note : Two runs of copper conductor and one run of 2.5 Sqmm copper earth wire will be measured and paid as one unit only )

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

S&F new generation energy saving and environmental friendly long life varsatile pressure die cast aluminium IP66 road way light fitting with high power LED as light source of capacity 20 watts with suitable drivers etc fixing to wall/poll with and including bracket made out of GI pipe of suitable dia light grade not less than 1.5 mtr long, bent to shape, fixed to Pole/Wall in any position with flat iron clamps of size 30 x 4mm including taking down old unserviceable street light fitting of any type and capacity complete all as specified and directed by Engr-in-Charge.. Make : Havells cat No : VILUMINASL20WLED757SASYBOPC or techno commercial equivalent model in Philips /Bajaj /Luker /Wipro.

Habib Traders (BID ID -3123819)