Tender Document For Renovation, reparing and other required civil and electrical work at IITE campus

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal cu.

size) and curing complete excluding cost of formwork in (A) m

5 Foundation and Plinth

Providing and laying cement concrete 1:2:4 (1- Cement : 2-

Coarse sand : 4- graded stone aggregates 20 mm nominal

05010BA 5.3.13 size) and curing complete excluding cost of formwork in

(B)Independent piers, columns, and pillars, upto floor two

Providing and laying cement concrete work 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm nominal

05011AA 5.4.1 size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A)

7 Foundations, footings, Base or columns and Mass concrete

Providing and laying cement concrete work 1:2:4 (1- Cement :

2- Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork and cu.

reinforcement for reinforced concrete work in (B) Slabs, m

landing, shelves, Balconis , Lintels, Beams, Girders and

8 Cantilever upto floor two level.

Providing TMT Bar FE 415 reinforcement for R.C.C. work

05014BA 5.4.11 including bending, binding and placing in position complete kg

9 upto floor two level

Deduct for omiting in R.C.C. work smooth finishing of the

05017 5.4.16 exposed surface with cement mortar 1:3 (1-Cement : 3- Fine

Providing and laying damp proof course 25mm thick cement

05021A 5.7.1 concrete 1:2:4 (1-Cement : 2 coarse sand : 4 stone aggregate

11 10 mm nominal size) and curing complete

Extra for providing and mixing water proofing material in

05022 5.7.5 Cement concrete in mix proportion recommended by the Litres or Kg per Quintal of Cement

12 manufacturers.

Providing and fixing 25 cm Wide & 3mm thick exterior

composite panel on existing expansion joint horizontally & Sq

vertically with all material, hardware, acessories & fittings etc m

Providing and laying controlled cement concrete M.150 for curing complete cu. m

5.8.1 excluding cost of formwork and reinforcement for reinforced concrete work in (A)

14 Foundations, footings,Base of columns and Mass concrete

Providing and laying controlled cement concrete M.150 for curing complete cu. m

5.8.1 excluding cost of formwork and reinforcement for reinforced concrete work in (B)

15 Walls, from top of foundation level upto floor two level

Providing and laying controlled cement concrete M.150 for curing complete

05023C excluding cost of formwork and reinforcement for reinforced concrete work in (C)

A Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever upto

16 floor two level

Providing and laying controlled cement concrete M.150 for curing complete cu. m

5.8.1excluding cost of formwork and reinforcement for reinforced concrete work in (D)

17 Columns, Pillars posts and struts upto floor two level.

Providing and laying controlled cement concrete M.150 for curing complete cu. m

5.8.1 excluding cost of formwork and reinforcement for reinforced concrete work in (E)

18 Staircases excluding landing upto floor two level

Providing and laying controlled cement concrete M.150 for curing complete cu. m

5.8.1 excluding cost of formwork and reinforcement for reinforced concrete work in (K)

19 Vertical and Horizontial its upto floor two level.

Providing and laying controlled cement concrete M.200 and curing complete cu. m

5.8.2 excluding the cost of formwork and reinforcement for reinforced concrete work

20 in (A) Foundations, footings, Base of columns and Mass concrete

Providing and laying controlled cement concrete M.200 and curing complete cu. m

5.8.2 excluding the cost of formwork and reinforcement for reinforced concrete work

21 in (B) Walls, from top of foundation level upto floor two level

Providing and laying controlled cement concrete M.200 and curing complete

05024C excluding the cost of formwork and reinforcement for reinforced concrete work

A in (C) Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto

22 floor two level.

Providing and laying controlled cement concrete M.200 and curing complete cu. m

5.8.2 excluding the cost of formwork and reinforcement for reinforced concrete work

23 in (D) Columns, Pillars posts and struts upto floor two level.

Providing and laying controlled cement concrete M.200 and curing complete cu. m

5.8.2 excluding the cost of formwork and reinforcement for reinforced concrete work

24 in (E) Staircases excluding landing upto floor two level

Providing and laying controlled cement concrete M.200 and curing complete cu. m

5.8.2 excluding the cost of formwork and reinforcement for reinforced concrete work

25 in (K) Vertical and Horizontial its upto floor two level.

Providing and laying controlled cement concrete M.250 and curing complete cu. m

5.8.3 excluding the cost of formwork and reinforcement for reinforced concrete work

26 in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete cu. m

5.8.3 excluding the cost of formwork and reinforcement for reinforced concrete work

27 in (B) Walls, from top of foundation level upto floor two level

Providing and laying controlled cement concrete M.250 and curing complete

05025C excluding the cost of formwork and reinforcement for reinforced concrete work

A in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever upto

28 floor two level.

Providing and laying controlled cement concrete M.250 and curing complete cu. m

5.8.3 excluding the cost of formwork and reinforcement for reinforced concrete work

29 in (D) Columns, Pillars posts and struts, upto floor two level.

Extra for half brick masonry in superstructure above plinth Sq

30 level upto floor two level. (A) Modular m

Providing formwork of ordinary timber planking so as to

give a rough finish including centering shuttering strutting

and propping etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M. and removal Sq

of the same for in situ reinforced concrete and plain m

concrete work in. (C) Vertical surface such as walls (any

thickness) partitions and the like including attached

31 buttresses & string course & the like.

STEEL ALUMINIUM AND IRON WORK

Steel work, riveted in built up sections framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A) In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

32 purlins conneted to common rafters and the like.

Steel work, riveted in built up sections framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (D) In trussses and trussed

33 purlins, upto 25 M. span and 15 M ovarall height.

Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (D) In trussses and trussed

34 purlins, upto 25 M. span and 15 M. ovarall height.

Providing and fixing 1mm thick M.S. sheet sliding shutters

with frame and diagonal braces of 40 x 40 x 6 mm angle iron,

3.15 mm M.S. gusset plates at Junctions and corners 25 mm

11004A 11.700 dia. pulley, 40 x 40 x 6mm angle and T-iron guide rail at top

and bottom respactively with handles, stoppers and locking

agangement etc, including applying a priming coat of red

Fixing standard steel Doors, windows and ventilatos inwalls

with 16 x 3.15 mm longs 10 cm. long embeded in Cement

11009 11.14 Concrete block 15 x 10 x 10 of 1:3:6 (1- Cement : 3-coarse

sand : 6-graded stone aggregate of 20mm size ) cost for

36 supply of door/ window/ ventilators shall be paid separately.

Providing and fixing M.S. Fan clamps type 1 to 16mm dia

M.S. bar bent to shape with hooked ends to R.C.C. slabs Eac

curing, laying including painting the exposed portion of h

37 loops, all as per standard design complete.

Extra over rate of item 20 for providing and fixing M.S. fan

clamps type-II as per standard design in R.C.C. beams during

laying towards additional height of the clamp due to beam

Providing and fixing M.S. round holding down or anchor bolts

39 with nuts and washer plates complete.

Providing and fixing EZ-7 section door/window frame

11013 0.00 including welding and fixtures fastenings including 3 coats of

40 approved enamel oil paint etc complete.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm@ wt

kg/m, vertical member of size 122.20mm x 31.75mm x

1.50mm @1.398 kg/mt with sliding shutters of horizontal Sq

member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical m

member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with

5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

41 etc complete for window.

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member Sq

size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical m

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

42 as per details etc

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

Kg/mt, vertical member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal Sq

member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, m

vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant

43 glass fixing to frame as per details etc complete for window.

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt

with colour anodized alluminium frame with 5 mm thick Sq

transparent bronze colour tinted float glass with colour m

anodized alluminium frame for ventilation with 5 mm thick

44 frosted glass as details etc complete for.window

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt Sq

with colour anodized alluminium frame for ventilation with 5 m

45 mm thick frosted glass as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt

11031 with colour anodized alluminium frame with 5 mm thick

transparent bronze colour tinted float glass as details etc

46 complete for Fix window.

Providing and fixing extruded aluminum window having

extruded aluminum Colour Powder Coated section frame

main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384

Kg/mt,horizontal Four track member size 122.20mm x

31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of

size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt

11032 with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical member of size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm

thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

47 etc complete for window.

Providing and fixing window having extruded aluminum

Colour Powder Coated section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt, horizontal Three track

member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt,

vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt.

1.06 Kg/mt with sliding shutters of horizontal member size Sq

40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical m

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per

Providing and fixing window having extruded aluminum

Colour Powder Coated section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

Kg/mt, vertical member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.0.659 Kg/mt with sliding shutters of horizontal Sq

member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, m

vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per

49 details etc complete for window

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt

with colour Powder Coated alluminium frame with 5 mm Sq

thick transparent bronze colour tinted float glass with colour m

anodized alluminium frame for ventilation with 5 mm thick

50 frosted glass as details etc complete for.window

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x 1.2mm , @ Wt.

11036 Kg/mt with colour Powder Coated alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

51 complete for Ventilation

Providing and fixing standared extruded of alluminium

section of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt

11037 with colour Powder Coated alluminium frame with 5 mm

thick transparent bronze colour tinted float glass as details

52 etc complete for Fix window.

Fixing Metallic tower bolts of sizes with necessary screws

12001 12.400 etc. complete (Tower bolts and screws to be paid under

53 separate items)

Fixing Metallic flush bolts of sizes with necessary screws

12002 12.500 etc. complete (Flush bolts and screws to be paid under

54 separate items)

Fixing metallic or plastic door handles of sizes with

12003 12.300 necessary screws etc. complete (Door handles and screws

55 to be paid under separate items)

Fixing metallic gate and shutter hooks and eyes of size Eac

56 (Hoks and eyes to be paid under seperate items) h

Fixing metallic door latches of sizes with necessary screws

12005 11.11 etc. complete (Door latches and screws to be paid under

57 separate items)

Fixing metallic mortice night latches with necassary screws

including making necessary holes in wooden door shutter Eac

etc. complete (Mortice night latches and screw to be paid h

58 under separate items)

Fixing metallic ball catchers 10mm dia. (Ball catchers to be Eac

59 paid under separate item) h

Fixing metallic casement window fasteners with necessary

12008 12.200 screws etc. complete (casement window fasteners and

60 screws to be paid under separate items)

Fixing metallic casement stays of size with necessary

12009 12.21 screws etc. complete (casement stays and screws to be paid

61 under separate items)

Fixing metallic cup board or wardrobe locks of sizes with

12010 12.24 necessary screws etc.complete (Locks and screws to be

62 paid separately)

Fixing metallic or plastic cupboard or handrobe knobs of

12011 12.25 sizes with necessary screws/ bolts etc. complete (knobs and

63 screws / bolts to be paid separately)

Fixing metallic floor door stoppers of sizes with rubber

cushion screws etc. to suit shutter thickeness complete Eac

(Floor door stopper with rubber cushion and screws to be h

64 paid under separate items)

Fixing metallic door handles or knobs for mortice locks with

12013 12.28 necessary screws etc. complete (Door handles /knobs and

65 screws to be paid spearately)

Providing and fixing sheet glass, selected quality (Type-C)

bedded in putty and fixed with wooden beading including Sq

the cost of wooden beadings of first class teakwood and m

66 necessary cutting of glass. (2) 6 mm thick.

Providing and fixing rough cast wired glass, 6mm thick

bedded in putty and fixed with wooden beading including Sq

the cost of wooden beadings of Indian teak wood and m

67 necessary cutting of glass. (C) Wired - figured glass

Providing and fixing sheet glass ordinary quality bedded in

putty and fixed with wooden beadings including the cost of Sq

wooden beadings of first-class teak wood and necessary m

68 cutting of glass. (3) 3mm thick

Providing and fixing sheet glass ordinary quality bedded in

putty and fixed with wooden beadings including the cost of Sq

wooden beadings of first-class teak wood and necessary m

69 cutting of glass. (4) 4mm thick

Extra for using ground glass (frosted or obscured on one Sq

70 side) instead of plain glass. m

Deduct for difference in cost of meterials and labour

involved in method of glazing if changed in item No. 13 (A) Sq

Front and back puttied and sprigged or fixed with glazing m

Grinding, Polishing and rounding of edges of glass or Rm

72 glazing sheets. t

PAVING AND FLOOR FINISH

Providing and laying cushioning layer on R.C.C. Slab

consisting of 75mm thick lime, concrete using brick Sq

aggregate of 20mm nominal size mortar compresing of 1- m

73 Lime : 2- fine sand)

Precast terrzo tiles 27 to 28mm thick with white Black or

white and black marble chips of sizes upto 6mm laid in

floors, treads of steps and landings on a bed of 25mm

14003EA 0.00 average thickness of lime mortar 1:6 jointed with neat

cement slurry mixed with pigment to match the shade of

tiles including rubbing and polishing complete with precast

74 tiles of (2) Dark shades using ordinary cement

Providing and laying precast terrazo tile 20mm thick

white,black, white and black (or of the colour specified in

specification of tender item) marble chips of sizes upto

6mm laid in floors, treads of steps and landings on a bed of

25mm average thickness of Lime mortar 1:1.5(1-Lime putty Sq

: 1.5 coarse sand) or C.M. 1:6 (1:cement :6 - coarse sand) m

jointed with neat cement slurry mixed with pigment to

match the shade of tiles including rubbing and polishing

complete with precast tiles of.(A) Light shades using white

Providing and laying precast terrazo tile 20mm thick white

and black (or of the colour specified in specification of

tender item) marble chips of sizes upto 6mm laid in floors,

treads of steps and landings on a bed of 25mm average

14004BA 14.19 thickness of Lime mortar 1:1.5(1-Lime putty : 1.5 sand) or

C.M. 1:6 jointed with neat cement slurry mixed with

pigment to match the shade of tiles including rubbing and

polishing complete with precast tiles of.(B) Medium shades

76 using approx. 50% white cement and 50% ordinary cement

Providing and laying precast terrazo tile 20mm thick

white,black,white and black (or of the colour specified in

specification of tender item) marble chips of sizes upto

6mm laid in floors, treads of steps and landings on a bed of

25mm average thickness of Lime mortar 1:1.5(1-Lime putty Sq

: 1.5 coarse sand) or C.M. 1:6(:1 - cement :6 - coarse sand) m

jointed with neat cement slurry mixed with pigment to

match the shade of tiles including rubbing and polishing

complete with precast tiles of. (B) Dark shades using

77 ordinary cement

Providing and laying precast terrazo tiles 20mm thick with

marble chips of sizes. upto 6mm in skirting and risers of

steps not exceedings 30 cms. in height on 10mm thick Sq

cement plaster 1:3 (1-cement : 3-coarse sand ) jointed with m

neat cement slurry including rubbing and polishing

78 complete with tiles of. (A) Light shades using white cement

Providing and laying chequered terrazo tiles 22mm thick

with marble chips of sizes upto 6mm in floors on 25mm

thick bed of Lime mortar 1:1.5 (1-Lime putty : 1.5 coarse

14006AA 14.25 sand) or C.M. 1:6 (1 -cement :6 - coarse sand) jointed with

neat cement slurry mixed with pigment to match the shade

of the tiles including rubbing and polishing complete. (A)

79 Light shades using white cement

Providing and laying chequered terrazo tiles 28mm thick

with marble chips of sizes upto 6mm in treads of stairs and

staircases in 12mm thick bed of lime mortar 1:1.5 (1-Lime

14007AA 14.27 putty :1.5 coarse sand) or C.M. 1:6 (1- cement : 6- coarse

sand) jointed with neat cement slurry mixed with pigment

to match the shade of tiles including rubbing and polishing

80 complete. (A) Light shades using white cement

Providing and laying chequered terrazo tiles 28mm thick

with marble chips of sizes upto 6mm in treads of stairs and

staircases in 12mm thick bed of lime mortar 1:1.5 (1-Lime

14007BA 14.27 putty :1.5 coarse sand) or C.M. 1:6 jointed with neat

cement slurry mixed with pigment to match the shade of

tiles including rubbing and polishing complete. (B) Dark

81 shades using ordinary cement

Providing and laying white glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of 12mm Sq

thick cement mortar 1:3 (1-cement : 3-coarse sand ) m

82 finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

14.29 24'' in flooring treads of steps and landing laid on a bed of Sq

(C1) 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) m

83 finishing with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x

14.29 36'' in flooring treads of steps and landing laid on a bed of Sq

(C2) 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) m

84 finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in

skrting risers of steps and dedo on 10mm thick cement Sq

plaster 1:3 (1-cement : 3-coarse sand) and jointed with m

85 white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x

14.32 24'' in skrting risers of steps and dedo on 10mm thick Sq

(C1) cement plaster 1:3 (1-cement : 3-coarse sand) and jointed m

86 with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , in

14.32 skrting risers of steps and dedo on 10mm thick cement Sq

(C2) plaster 1:3 (1-cement : 3-coarse sand) and jointed with m

87 white cement slurry

Providing and fixing 50mm internal or external angles of Rm

88 glazed tiles t

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

14011A 14.36 sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid

and jointed with gray cement slurry including rubbing and

89 polishing complete. (A) Marble slab 25mm thick

Providing and laying polished kota stone slab 25mm thick

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and Sq

jointed with gray cement slury mixed with pigment to m

match the shade of slab including rubbing and polishing

90 etc. complete.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M250 grade concret as per approved design Rm

and including excavation for fixing in proper line and t

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

14033 per approved design Confirming to IS 15658 : 2006

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

92 IRC : SP 63-2018 etc. Complete.

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope and

14035 to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and

extending them upto 15 cm along the wall,clearing with

93 water and oxalic acid etc. as directed.

Providing and laying coloured glazed tiles of the size

14036 skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

94 cement slurry.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

15001A 15.100 with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of

95 purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Providing ridges or hips 600 mm overall in plain G.I. sheet

class-3 fixed with G.I.J. or L Hooks and nuts 8mm dia G.I. Sq

Limpet and bitumen washer complete. (1) 0.80 mm thick m

Providing valleys 900mm overall in plain 1.6mm thick G.I.

sheet fixed with G.I. J or L Hooks, Bolts and nuts glavanised Sq

iron J or L Hooks Bolts and nuts 8mm dia G.I. Limpet and m

97 bitumen washers complete.

Providing and fixing 150mm wide 450mm over all

semicircular plain G.I.sheet class-3 gutter with Iron

15005A 15.10 brackets 40mm x 3mm size Bolts, Nuts, washers etc.

including making necessary connection with rain water

98 pipes. (i) 0.80 mm thick Sheet.

Filling cement concrete 1:2:4 (1- Cement :2-coarse sand :4-

15007 15.26 graded stone aggregate 12.5 mm nominal size) in gaps of

99 A.C. sheet corrugation and wings of ridges.

Providing and fixing tiles roofing with manglore tiles Rm

100 including teak reepers of sizes 50mm x 25mm. t

Providing and fixing on wall face C.I. Rain water pipe

including filling the joints with spun yarn soaked in neat Rm

cement slurry and cement mortar 1:2 (1- Cement : 2-fine t

101 sand) (A) 75 mm dia.

Providing and fixing M.S Holder bat clamps of approved

design to C.I. or S.C.I. pipes embedded in and including

cement concrete blocks 100mm x 100mm x 100mm. size of Eac

1:2:4 ( 1-Cement : 2- coarse sand :4- graded stone h

aggregate of 20mm nominal size ) and cutting holes and

102 making good the wall etc, complete. (A) 75mm dia.

Providing and fixing and embedding sand, C.I. rain water

pipes in the masonry surrounded with 12mm thick cement Rm

mortar of the same mix as that of masonry. (A) 75 mm dia t

Providing and fixing for wall plugs and standard holder bat

clamps comprising of two semicircular haves of flat iron Eac

and cast iron base screwed on wooden plugs. (B) 80 mm h

Providing and fixing for wall plugs and standard holder bat

clamps comprising of two semicircular haves of flat iron Eac

and cast iron base screwed on wooden plugs. (C) 100 mm h

Providing and Fixing 6 mm thick Lexan Polycarbonate multi

wall roofing sheet fixed with hilti screw and rubber silicon Sq

sealer and alluminium strip of size 50 x 3 mm etc complete m

106 as directed by Engineer in charge.

CEILING AND LINING

Providing and fixing fibre insulations board lining with butt

16003A 16.400 jointing and Nails (frame worked cover fillets to be

107 measured and paid for separately) (i) 12mm thick

Providing and fixing fibre insulations board lining with butt

16003C 16.400 jointing and Nails (frame worked cover fillets to be

108 measured and paid for separately) (iii) 25mm thick

Providing and fixing eco-friendly light weight calcium

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles shall

have , light reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation .

The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having NRC value

of 0.5 & Globe having NRC value of 0.75 NRC or equivalent

of size 595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped galvanized

steel sections (galvanizing @120 grams per sqm including Sq

16006 both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between

main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to form

grid of size 600X600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel

of size (24X24X3000mm made of 0.40mm thick (minimum)

109 sheet with the help of rawl plugs at 450mm centre to centre

Pro. And longsingle

fixing dry wall

gypsum boardand

mm thick sections using water proof board of size 1220 mm

x 1830 mm x 8.0 mm suspended by GI suspender channel of

size 25 mm x 3 mm with intermediate channel og size

mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling

section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c Sq

and perimeter channel A of size 20 mm x 27 mm x 30 mm x m

0.5 mm at edges & drops incl.paper tap sand sofit cleat,

anchor fastener, scoch bolt connecting cleat,joining

compound top coat on ceiling incl.making necy.opening for

light fitting,diffuser etc. comp. as per detail drawing as

PLASTER AND POINTING

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two Sq

level and finished even and smooth in (i)Cement mortar 1:3 m

111 (1-cement:3-sand)

Providing 10mm thick cement plaster in single coat on

brick/concrete walls for interior plastering upto floor two Sq

level and finished even and smooth in (iii) Cement mortar 1:6 m

112 (1-cement:6-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior Sq

plastering upto floor two level and finished even and smooth m

113 in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior Sq

plastering upto floor two level and finished even and smooth m

114 in (iii) Cement mortar 1:6 (1-cement:6-sand)

Providing 20mm thick cement plaster in single coat on single

or half brick walls for interior plastering upto floor two level Sq

and finished even and smooth in (i) Cement mortar 1:3 (1- m

115 cement:3-sand)

Providing 20mm thick cement plaster in single coat on single

or half brick walls for interior plastering upto floor two level Sq

and finished even and smooth in (iii) Cement mortar 1:6 (1- m

116 cement:6-sand)

20mm thick sand faced cement plaster on walls upto height

10 metres above ground level consisting of 12mm thick Sq

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick m

117 finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

17015 0.000 cement mortar 1:1 including neat cement finishing, watering Rmt

118 etc. complete.

Providing 20 mm thick double coat mala cement plaster on

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1 Sq

Cement : 4 coarse sand) in rough finishing and 8 mm thick top m

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

119 with trovel including scaffolding curing etc. complete.

Providing 15 mm thick cement plaster by using Ready Mix

Mortar for plaster in single coat on rough (similar) side of

17026 single or half brick walls for interior plastering upto floor two

level and finished even and smooth in Cement mortar 1:3 (1

120 Cement : 3 sand)

WHITE WASHING COLOR WASHINGDISTEMPER;ING & OTHER FINISHING

White washing with lime on wall surface (two coats) to give

an even shade including thoroughly booming the surface to Sq

remove all dirt, dust; mortar drops and other foreign m

White washing with lime on wall surface (one coats) to give

an even shade including thoroughly booming the surface to Sq

remove all dirt, dust; mortar drops and loose scales of lime m

122 wash and other foreign matter.

Colour washing with lime on wall surface (two coats ) over

and including a primary coat of white washing to give an Sq

even shade after through brooming the surface to remove m

123 all dirt, dust, mortar drops and other foreigh matter.

Colour washing with lime on wall surface (one coats ) to

give an even shade including throughly brooming the Sq

surface to loose scales of lime wash and other foreign m

Removing dry or oil bound distemper by a washing and

18014 18.33 scraping and sand papering the wall surface smooth

125 including necessary repairs to scratches complete.

Extra over Item 44 to 46 for every subsequent coat of Sq

126 approved brand and manufacture. m

Finishing wall with water proofing cement paint of on wall

surfaces (Two coats) to give an approved brand and

18027 18.51 manufacture and of required shape even shade after

thoroughly brushing the surface to remove all dirt and

127 remains of loose powered materials.

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

18031 18.57 surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

128 matter and sand papered smooth.

PAINTING & POLISHING

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

19001 19.200 cleaning, oil,grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand

129 paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to

19002 19.700 give an even shade including cleaning the surface an even

shade including cleanicn the surface of all dirt, dust and

130 other foreign matter.

Painting two coats (excluding priming coat) on new steel and

other metal surface with synthetic enamel paint, brushing to Sq

give an even shade including cleaning the surface of all dirt, m

131 dust and other foreign matter.

Painting one coats (excluding priming coat) on previously

printed steel and other metal surface with synthetic enamel Sq

paint, brushing to give an even shade including cleaning the m

132 surface of all dirt, dust and other foreign matter.

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and

19008B 19.500 fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of all

133 dirt, dust and other foreign matter. (B) 75mm dia.

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and

19008C 19.500 fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of all

134 dirt, dust and other foreign matter. (C) 100mm dia.

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even shade

after thoroughly brushing the surface to remove all dirt, and

135 remains of loose powdered materials.etc complete

Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give

19032 an even shade including thoroughly brushing the surface free sqm

from mortar dropping and other foreign matter and sand

136 papered smooth.

DEMOLITION & DISMANTLING

Demolition including stacking of serviceable materilas and

20002 20.300 disposal of unserviceable materials with all lead and lift. (i)

137 R.C.C. work

Demolition of Brick work and stone masonry including

stacking of serviceable materilas and disposal of cu.

unserviceable materials with all lead and lift.(ii) In Cement m

Demolition of terrace including stacking of serviceable

20004 20.21 materilas and disposal of unserviceable materials with all

139 lead and lift.(i) Brick tile covering.

Dismentaling tiled of stone floors laid in mortar including

20005 20.23 stacking of serviceable materilas and disposal of

140 unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materilas and Sq

disposal of unserviceable materials with all lead and lift.(i) m

141 G.I.sheet roofing.

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, holdfasts and Eac

other attachment etc. complete and stacking them within all h

142 lead and lift.(i) Not exceeding 3 Sq.M. in area.

Removing and scraping of old deteriorated plaster of any

thickness fromm wall / R.C.C member including stacking of Sq

serviceable material and disposal of unserviceable from site m

143 of work with all lead and lift

Structural steel work ( Confirming to IS 4923-1997) riveted,

bolted or welded in builtup for all type sections, in framed

work, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer all

complete as per the structural designs and directions of

144 Engineer in charge.Column ( 122 x 61 x 3.6mm )

REPAIRS TO BUILDING

Providing and fixing M.S. fan clamps of shape and size as

21001 21.800 specified in existing R.C.C. slab including cutting chase and

145 making good.

Cutting out cracks of roof terrace to V- section , cleaning

21002A 21.23 out, wetting , grouting with cement and sand slurry 1:3 (1- Rmt

146 cement 3-sand )

Cutting out cracks roof terrace to V-Section cleaning out

21003A 21.24 and filling solidly with a hot mixture of bitumen and clean Rmt

147 dry sand (1:1 by weight)

Providing and fixing 1.20 Metre high fencing with 2.0 Metre

long M.S. Angle posts 40mm x 40 mm x6 mm and oil

painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan

22001 22.200 lines and two diagonals of galvanised steel barbed wire Rmt

weighting 9.38 Kg. per 100 Metre, strained and fixed to

posts with G.I,staples including fixing the postsin ground

148 with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consistment with

I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC.

22007 0.00 As Per 6131_paret-II Consentration Weight one percent is Smt

recommended i.e one litre 20 EC chemical emulsion with

liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of

149 surface is recommended as per I.S

Pro. and mixing Migratory Corrosion Admixture having

Specific Gravity 1.01 to 1.04 pH value (Minimum 9.50) shall

be alkaline in nature and having bipolar concrete

penetrating corrosion inhibiting properties, inhabitor shall

be non-nitrite based & have the ability to provide corrosion

protection to both anodic and cathodic sites on the steel

surface, inhibitor-steel complex shall formed polydentate

complexes, having more than one bond with steel per

molecule of inhibitor, with steel surface to promote proper

film formation with enhenced bond to steel, inhibiting the

electro-chemical corrosion reaction, inhibitor shall not have

any adverse effect on concrete compressive strength,

inhibitor shall have a corrosion rate of zero coulombs per

ASTM-G109-2005, admixture shall be conforming to IS

and in liquid form at the rate of 5% by weight of

150 cementitious materials.. Etc. complete.

Anti-Termite System:Providing and laying of permanent

piping technology anti-termite treatment before flooring

work by installing LLDP (Low linear density polyethylene)

tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube, having

working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be

installed at the entire periphery of the building and at

internal network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance (adjusted as per

building layout ) & Ends of loop pass through a PVC elbow of

minimum 32 mm ID at junction box of wall and floor level, Sq.

entering into a steel reinforced grooved flexible pipe of mt

minimum 22 mm ID leading into junction box and the loops

shall terminate in junction boxes & test every junction

during injecting chemicals for termite control treatment.

The anti termite chemical Imidacloprid 30.5% SC mix as per

IS-6313 (part III) shall be injected by the pressure pump

diluted with water @ 10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junction boxes

dully approved by Engineer-in-Charge with bond of 5 year

warranty.(i)Anti Termite chemical injected area (Chemical

151 injecting incl. labour cost)

Anti-Termite System:Providing and laying of permanent

piping technology anti-termite treatment before flooring

work by installing LLDP (Low linear density polyethylene)

tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube, having

working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be

installed at the entire periphery of the building and at

internal network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance (adjusted as per

building layout ) & Ends of loop pass through a PVC elbow of

minimum 32 mm ID at junction box of wall and floor level, sq.

entering into a steel reinforced grooved flexible pipe of mt

minimum 22 mm ID leading into junction box and the loops

shall terminate in junction boxes & test every junction

during injecting chemicals for termite control treatment.

The anti termite chemical Imidacloprid 30.5% SC mix as per

IS-6313 (part III) shall be injected by the pressure pump

diluted with water @ 10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junction boxes

dully approved by Engineer-in-Charge with bond of 5 year

warranty.(II)Anti Termite chemical injected area (Chemical

152 injecting incl. labour cost)

WATER SUPPLY PLUMBING & SANITARY FITTING

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside

23004A 23.800 Dia. Low densidy, complete with special falnge compression

type fittings, wall clipsetc. including making good the wall

153 ceiling and floor.(A) 20mm

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside

23004B 23.800 Dia. Low densidy, complete with special falnge compression

type fittings, wall clipsetc. including making good the wall

154 ceiling and floor.(B) 25mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

23004C 23.800 outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

155 good the wall ceiling and floor.(C) 32mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

23004D 23.800 outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

156 good the wall ceiling and floor.(D) 40mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

23004E 23.800 outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

157 good the wall ceiling and floor.(E) 50mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the following

23004F 23.800 outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

158 good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure poluthene pipes of the following

23004G 23.800 outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making

159 good the wall ceiling and floor.(G)110 mm

Providing and fixing cast iron spigot and socket soil, waste

23005BA 23.79 and ventilating pipes of the following nominal size.(B)

Providing and fixing cast iron spigot and socket soil, waste

23005CA 23.79 and ventilating pipes of the following nominal size.(C)

Providing and fixing in position cowel went to pipes.(B) Eac

162 75mm dia. h

Providing and fixing in position cowel went to pipes.(C) Eac

163 100mm dia h

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

23008 23.857 screaed down or higned grating including cost of cutting

and making good the walls and floor 100mm inlet and

164 50mm outlet.(C) 100mm dia.

Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste Eac

and trap to be measured and paid for separately) (A) h

165 Vitreous China.(I) Long pattern = White colour

Providing and fixing wsh down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the

23010 23.112 trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine

sand) (Seal and cover to be measured and paid for

166 separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing 100mm size P or S trap for water

closet squatting pan including jointing the trap with the pan Eac

and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine h

167 sand)(A) Vitreous China.

Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-

coarse sand)a, pair of white vitreous China 250mm x Eac

130mm x 30mm footrest to long pattern squatting pan h

168 water closet.

Providing and fixing 12.5 Litres low level flushing cistern

with a pair, of C.I. or Mild brackets, complete with fittings

such as lead valve less syphon, 15mm nom.nal size brass

ball valve with polythene float, C.P brass handle unions and

couplings for connections, with inlet, outlet and overflow Eac

pipes, 40mm dia. porcelain enamelled flush bend including h

cutting holes in walls and making good the same

connecting the flush bend with cistern and closet (overflow

pipe to be measured and paid for separately)(A) Vitreous

169 China (I) In white colour

Providing and fixing 12.5 Litres high level C..I. flushing

cistern with A pair of C.I. or Mild steel brackets, womplete

with fittings such as syplionic arrangement, 15mm nominal

size brass ball valve with polythene float, lever G.I. China Eac

(60 cm. ) and pull union and couplings for connections with h

inlet, outlet and overflow pipes etc. including cutting holes

in walls and making good the same (overflow pipe to be

170 measured and paid fo separately )

Providing and fixing in position with clamps etc. 32mm

nominal internal diameter galvanised steel tube flush pipe

23015 23.117 for high level flushing cistern including connecting the

flush pipe with cistern and closet and making good the

171 walls and floors.

Providing and fixing plastic seat and cover for wash down

23017 23.121 water closer with C.P. brass hinges and rubber buffers. (B)

172 Black plastic seal and cover.

Providing and fixing washbasin with single hole for pillar

tap with C.I. or M.S. brackets painted white including

23018 23.127 sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm

173 x v 400mm size. (i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making Eac

good the same but excluding fittings. (C) Vitreous China h

174 Sink.(i) 600mm x 450mm x 150mm size

Providing and fixing C.P. brass waste for washbasin or sink. Eac

175 (A) 32mmdia. h

Providing and fixing C.P. brass waste for washbasin or sink. Eac

176 (B) 40mm dia. h

Providing and fixing M.I. fisher union for washbasin or sink. Eac

177 (A) 32mm dia. h

Providing and fixing M.I. fisher union for washbasin or sink. Eac

178 (B) 40mm dia. h

Providing and fixing 100mm sand cast iron grating for Eac

179 gully, floor or Nahni trap. h

Providing and fixing C.P. brass shower rose with 15mm or Eac

180 20mm inlet.(A) 100mm dia. Each h

Providing and fixing C.P. brass towel rail comlete with C.P.

23025 23.144 brass brackets fixed to wooden plugs with C.P. brass

181 scews.(B) 600mm x 20mm size.

Providing and fixing 600mm x 120mm glass shelf with C.P.

23026 23.145 brass bracket and guard rail complete mixed to wooden

182 plug with C.P. brass screws.

23027 23.146 Providing and fixing toilet paper holder.(A) C.P. Brass

Providing and fixing screw down bib taps of following

23028A1 23.92 size.(A) Brass screw down bib tap polished bright. (i) 15mm

Providing and fixing screw down bib taps of following

23028A2 23.92 size.(A) Brass screw down bib tap polished bright. (ii)

Providing and fixing screw down bib taps of following

23028B1 23.92 size.(B) Brass chromium plated screws down Bib Tap. (i)

Providing and fixing screw down bib taps of following

23028B2 23.92 size.(B) Brass chromium plated screws down Bib Tap. (ii)

Providing and fixing screw down bib taps of following Eac

188 size.(C) Gun metal screw down bib tap. (i) 15mm dia. h

Providing and fixing screw down bib taps of following Eac

189 size.(C) Gun metal screw down bib tap. (ii) 20mm dia. h

Providing and fixing pillar tap, capstan head, screw down

23029A 23.95 high pressure with screws, shanks and back nuts. (i) 15mm

Providing and fixing pillar tap, capstan head, screw down

23029B 23.95 high pressure with screws, shanks and back nuts. (ii) 20mm

Providing and fixing brass screw down stop tap.(A) 15mm Eac

Providing and fixing brass screw down stop tap.(B) 20mm Eac

Providing and fixing brass screw down stop tap.(C) 25mm Eac

Providing and fixing Gun metal check or non-return fullway Eac

195 wheel valve.(A) 15mm dia. h

Providing and fixing Gun metal check or non-return fullway Eac

196 wheel valve.(B) 20mm dia. h

Providing and fixing Gun metal check or non-return fullway Eac

197 wheel valve.(C) 25mm dia. h

Providing and fixing Gun metal check or non-return fullway Eac

198 wheel valve.(D) 32mm dia. h

Providing and fixing Gun metal check or non-return fullway Eac

199 wheel valve.(E) 40mm dia. h

Providing and fixing chromium plated brass half trun flush

23032A 0.00 cock of approved quality including fixing in pipe line etc.

200 complete.(i) 20mm dia.

Providing and fixing chromium plated brass half trun flush

23032B 0.00 cock of approved quality including fixing in pipe line etc.

201 complete.(ii) 25mm dia.

Providing and fixing chromium plated brass half trun flush

23032C 0.00 cock of approved quality including fixing in pipe line etc.

202 complete.(iii) 32mm dia.

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc. complete.(A) Eac

White earthenware flat back or corner type size 430mm x h

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush Eac

pipe.(A) Squating plate pattern white earthenware 550mm h

23035 23.134 Providing and fixing Rubber plug for sink or wash basin.

Providing and fixing chromium plated, bottle trap with Eac

206 necessary couplings of approved quality for wash basin. h

Providing and fixing ball cock of approved. quality as Eac

207 directed.(A) Copper Metal (i) 25mm dia. h

Providing and fixing ball cock of approved. quality as Eac

208 directed.(A) Copper Metal (ii) 50mm dia. h

Providing and fixing ball cock of approved. quality as Eac

209 directed.(B) Abonite (i) 25mm dia. h

Providing and fixing ball cock of approved. quality as Eac

210 directed.(B) Abonite (ii) 50mm dia. h

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

23055 Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

211 good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

23056 Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

212 good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

23057 Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

213 good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

23058 Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

214 good the wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

23059 Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

215 good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

23060 Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

216 good the wall, ceiling and floor etc. complete. [F] 50mm.

Providing laying and jointing in true line and level 15mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre Rm

C/C or shall be concealed as directed including necessary t

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 25mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre Rm

C/C or shall be concealed as directed including necessary t

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 32mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre Rm

C/C or shall be concealed as directed including necessary t

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre Rm

C/C or shall be concealed as directed including necessary t

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50mm

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre Rm

C/C or shall be concealed as directed including necessary t

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on Rm

wall using of PVC clamp of the size 160 mm diametre x 210 t

mm length x 196 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

222 cement including cost of all materials.

Providing, laying and jointing in true line and level

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on Rm

wall using of PVC clamp of the size 110 mm diametre x 149 t

mm length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

223 cement including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with jali of the following nominal

23068 diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

224 good the walls.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 75 mm diameter with jali of the following nominal

23069 diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

225 good the walls.

DRAINAGE & SEWERAGE ITEM

Providing and laying (to level or slopes) and jointing with

stiff mixture of Cement Mortar in proportion 1:1 Salt glazed

stoneware pipes including testing of pipes and joints

226 complete.(A) 100mm dia.

Providing and laying jointing and pointing with stiff mixture

24005A 24.18 of Cement Mortar 1:1 (1-Cement : 1-Fine sand) 150 mm Rmt

227 internal diameter salt glazed stoneware half round channels.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of Eac

300mm x 300mm size (inside) with standard weight.(i) h

228 Square mouth traps. (A) 100mm x 100mm size P type.

Providing laying (to level or slopes) and jointing reinforced

concrete Light duty non-pressure pipes I.S. class NP2 of the

24007DA 24.22 following internal diameter with collars and butt ends Rmt

prepared for collar joints including testing of joints

229 complete.(D) 300mm

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size) finished Eac

smooth complete including curing and festing (i) Inside size h

900mm x 1200mm and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight of cover and frame

to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick msonry

using brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1)

230 A type depth 0.90 Metre for 150mm diameter sewer.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-

Coarse sand :4-stone aggregate 20mm nominal size) finished Eac

smooth complete including curing and festing (i) Inside size h

900mm x 1200mm and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight of cover and frame

to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick msonry

using brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2)

231 B type depth 1.50 Metre for 150mm diameter sewer.

(A) With 230mm thick walls of brick msonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Eac

Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (4) D type h

232 depth 3.15 Metre for 150mm diameter sewer.

233 providing and fixing 5mm glass for Aluminium section Sq m

234 providing and fixing 5mm ACP sheet for Aluminium section Sq m

121 INTERNAL ELECTRIFICATION: Point

Point wiring for Light/ Bell with 2.1 sq.mm. & earth wire of 1.0 sq.mm (green) both

are of ISI marked FR. P.V.C. insulated multistrand copper wires in existing pipe duly

erected complete with 6A Modular type switch/bell push & accessories and earth

continuity of following type erected on Metalic box covered with approriate front

plate Modules erected concealed in wall/celing[b]single mounting base frame &

textured / Metalic front plates(cat. III)

122 Point wiring for FAN with 2.1 sq.mm. & earth wire of 1.0 sq.mm (green) both are of Point

.I.S.I.marked FR. P.V.C. insulated multistrand copper wires in existing pipe duly

erected complete with 6A Modular type switch/hum free EME 5/6step type

electronic fan regulator with separatly mounted & accessories and earth continuity

of following type erected on Metalic box covered with approriate front plate

Modules erected concealed in wall/celing [b]single mounting base frame &

236 textured /Metalic front plates (cat. III)

1 1 3 (A) Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected Point

on PVC/ Metalic box covered with appropriate front plate Modules erected

concealed in wall/ Celing with following type accessories.[b]single mounting base

237 frame & textured / Metalic front plates (cat. III)

112 Point wiring for individual plug with 2.1 sq.mm. & earth wire of 1.0 sq.mm (green) Point

both are of .I.S.I.marked FR. P.V.C. insulated multistrand copper wires in existing

pipe duly erected complete with 6A Modular type switch & 6A 5 pin plug erected on

metallic box coverd with appropriate front plate modules concealed in wall /

cealing with follwing type of accessories.[b]single mounting base frame & textured

238 / Metalic front plates (cat. III)

126 Providing Following Type Modular accessories Mounted on Metalic box coverd with Point

appropriate front plate Modules errected with necessary connectioin(Cat. III)

[1] one No. SP 6 Amp or One No. 5 Pin plug

240 [4] Blank plate single Nos.

241 [6] 16 Amp one way switch Nos.

242 [7] 6/16 Amp Universal socket Nos.

DO as item no.1 but with RJ-11 Tel.socket with company made box with front Nos.

243 moduler cover plate. (Without wiring - it will be included in circuit mains).

DO as item no.1 but with RJ-45 Data socket with company made with front moduler Nos.

cover plate suitable for legrand make race way. (Without wiring - it will be included

244 in circuit mains).

115 Providing, installing, testing, commissioning of CIRCUIT MAINS of following sizes

PVC insulated copper conductor multi-stranded flexible type wires with 20 / 25mm

dia P.V.C. Rigid conduits 1.5 mm thick ISI mark of above specified make with

following size of wires with LAPP cable make copper lugs, numbering ferrul as per

245 instruction of engineer in charge

Do as above but with 2 nos. of 1.5 sq mm and 1 no. of 1.0 sq mm (for earthing) Mtr.

Do as above but with 2 nos. of 2.5 sq mm and 1 no. of 1.0 sq mm (for earthing) Mtr.

247 wires ( ROOM DB TO SB Lighting Mainline).

Do as above but with 2 nos. of 4 sq mm and 1 no. of 2.5 sq mm (for Mtr.

248 earthing) wires ( ROOM DB TO AC). and AC point

Do as above but with 3 nos. of 6 sq mm and 1 no. of 2.5 sq mm (for Mtr.

249 earthing) wires ( ROOM DB TO 3 Phase PANAL mainline ).

Do as above but with1 no. of 2 Pair 0.5 cross section copper tinned pvc insulated Mtr.

Telephone wire with termination, ferrul numbering at both ends for identification (

250 ELE. SHAFT TO Tel. point ).

Do as above but with 1 no. of Cat-6 Data Cable wire with termination, ferrul Mtr.

numbering at both ends for identification ( server/switch to computer point, D-

251 Link / Molex / Lapp make.

Do as above but with 3+1 no. of CC TV Cable wire with termination, ferrul Mtr.

252 numbering at both ends for identification ( server/switch to DVR point)

132 Providing & erecting 1.5mm thick FIA approved and ISI Mark (embosed) Rigid PVC Mtr.

Pipe of following size complete erected with necessary PVC fitting & Junction box

fixed with adhesive solution & Clamps for the concealed types of erection.25mm

132 Providing & erecting 1.5mm thick FIA approved and ISI Mark (embosed) Rigid PVC Mtr.

Pipe of following size complete erected with necessary PVC fitting & Junction box

fixed with adhesive solution & Clamps for the concealed types of erection. 20 mm

MR Mains with 1.1 KV grade FRPVC insulated ISI Marked standred copper conductor Mtr.

with in existing pipe erected with 1.5 sq.mm FRP insuleted wire of Green colour for

earth continuity of following size

255 [a] 2 wire 1.5 Sq.mm

516 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with Nos

Condenser 230 volt A.C. 50 Cys. 1200 mm sweep complete having 3 blades with

aluminium blades with, canopy & 30 cms. down rod erected with24/0.2 flat 3 coreb

flexible wire with earthing &electronic humming free Regulator as per the OEM of

257 534 Supplying & erecting approved make Reversible fresh air Exhust fan having size 305 mmNos1400 RPM.1600

2 16 2 BUILDING LIGHTING. Supplying and erecting LED street light / Flood light fittings Nos

with High power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 &

LM-80 certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown. (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

3 10 1 (B) Miniatuer circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. Nos

system and having overload and short circuit tripping elements and breaking

capacity 10 KA to be erected in existing M.S. box confirming to IS 8828 / 1996 with

259 ISI Mark Cat - III

3 10 3 Providing & erecting 240 V MCB double pole switch for lighting load (B curve) Nos

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

260 following capacity , 6 to 32Amp. Cat.:- III

3 10 8 Providing and erecting four pole MCB Isolator A.C. 22 duty confirms to IS 13947 - 3 Ea.

261 in existing metal clad MCB distribution board. (a) For 40 Amp. Cat.:- III

2 17 2 upplying and erecting LED street light / Flood light fittings with High power White Nos

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown. (A)

Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection.( CAT iii)

263 Mics items for Elect

264 providing and fixing aluminium armor 25 sq mm XPL cable meters

providing and fixing distribution board 4 way TPN double shutter powder coated Nos

266 providing and fixing 125 amp MCCB switch 4 pole with MS powder coated box Nos

267 12 Way SPN distribution board Nos