Renovation of M.D. GUVNL Wing at 2nd floor at Sardar Patel Vidhyut Bhavan, Vadodara

Name of work :-Renovation of MD GUVNL Cabin & Wing at 2nd floor, S.P. Vidhyut Bhavan,Race Course, Vadodara.

m Description Qty UNIT Rate Amount

Demolition of brick work & stone masonry including stacking of serviceable materials and

1 disposal of unserviceable materials with all lead and lift. (III) In cement mortar. 15 CMT 558.57

Demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead

and lift. (I) R.C.C work.

Dismentaling tiled or stone floors laid in mortar , any type of flooring including stacking of

serviceable materials and disposal of unserviceable materials with all lead and lift.

Dismentaling wall tiled / any type of cladding material including stacking of serviceable materials

and disposal of unserviceable materials with all lead and lift.

5 Dismentaling False Ceiling 230 SMT 48.43

Providing & laying approved quality 15 mm thick Granite/Artificial stone work of approved shade (selected

and sorted for its uniform colour and thickness)., in window sills, jambs and soffits (surrounds on all

sidesof the opening) in required sizes and shapes, set with cement slurry (minimum 4.4 kg cement/sqm),

fixing toilet door shutters in two overlapping bands to give an over all width not less than 280mm including

moulded edges with cement mortar 1:3 and neat cement float in proper line, level and plumb ,filling the

joints in matching colour pigment to match the stone shade, supports, scaffolding and moulding, white

cement, matching pigment, rubbing, polishing after fixing to remove any undulation between the joints (if

6 required) with different grades of Emery, refilling of open joints, curing, daily cleaning and mopping, shall be 5 SMT 4851.00

done up to the satisfaction of the EIC. all complete as per detailed drawings and instruction of EIC. etc

complete in all aspects as per drawing and directed by Engineer. including 4 mm deep groove, at all floors,

all levels, all heights and all shapes. The rate includes machine cut edges of uniform thickness and beveling

and polishing of edges. The rate shall be inclusive of protecting sheet and after completion of work remove.

No Overlapping will be paid for measurement. Basic rate of stone is Rs. 300/ Sqft.

Providing and Laying Glossy/mat Finished vitrified tiles of size800x 1600mm fixing of new tiles on the

existing Flooring/Skirting and 10mm thick of approved make and colour having homogeniousematerials in

flooring laid on Chemical base and & fixing of new tiles on the existing Flooring with necessary adhesives /

7 chemicals. (For 2nd floor)Shade as per approved by Higher authority of approved brands like Somani 25 SMT 1713.00

,Asian(Bonzer), SunHeart,Marbito as directed by Architect/Engineer incharge.(Basic rateof The

Tiles:110/SQFT and Measurement Should be Consider L X B) ( * Basic rate of TILE - 75/- per Sq.Ft. )

Providing, supplying and fixing Openable (Swing) Door System with 12 mm thick clear toughened glass

door shutter, including automatic swing door operator, . patch fittings, locking arrangement, necessary

testing and commissioning, complete in all respects as per detail and design. ( Door size 2800 X 1000 -

Godrej make hardware - for All Doors)

Providing and fixing Floor Spring 120kg Load Adjustable,Maximum Door Width 1000 mm,Maximum Opening

angle 130 Degree,90 Degree Hold open in Both Direction as per Architect & MGVCL Instruction.Rate Shall be

Including Fitting Charge.Dorma / Euro/ Ozone / Enox /Hamco or equivalent.

Providing, supplying and fixing fixed glass partition comprising 12 mm thick clear toughened glass panels,

fixed with approved aluminium channel/U-channel or SS fittings as required, including all necessary

10 accessories, silicone sealant, gaskets, packing, alignment, cutting, edge polishing, transportation, installation 35 SMT 5219.50

and completion in all respects as per approved drawings and site conditions. (All Area)

FULL HEIGHT PARTITION (FULLY SOLID) (75mm thk.) Providing and fixing full height/half height double

skin wooden partition upto ceiling or beam bottom as per drawing and framing the skeleton(Hardwood

frame structure 00x600mm) with 50mm x 37mm thick vertical and horizontal hardwood) both side cover

with 12mm thick comm. ply finished both Side with1.0mm thick selected aminate,without any airgap and

grooving as per design & instruction of the EIC/Architect. wooden framing to be erected above false

11 ceiling.No extra cost to be paid for the same Before installation, make hole/face plate for conduit pipes of 54 SMT 3327.50

electrical networking cables with openable stud from partition Including all materials and labour etc. Open

edges also finish with laminate. complete as per detail drawing and instruction of Architect/engineer-in

charge.(Measurement shall be Consider Floor Level to false Celling Bottom Level.( Waiting area entry , pa

side & Pantry Area, MD CAbin)

Providing and fixing 75 mm thick Above ceiling partition of aluminium base framing system ( Aluminium box

frame for door of 50mm X 75mm box sections of 14 guage thk ) with required vertical and horizontal

members, securely anchored to floor, ceiling, and adjoining walls. The partition shall be clad on both sides

12 with 12 mm thick MR Grade plywood and finished. The cavity between the plywood panels shall be filled 15 SMT 3327.00

with 50 mm thick high-density Rockwool/Glass Wool acoustic insulation (48–64 kg/m³ density) to provide

sound insulation. All joints shall be properly sealed with acoustic sealant where required to minimize sound

transmission. ( Waiting area entry and pa side) & Pantry Entry

Veneer panelling: Providing & fixing 12mm thick fire retardant marine plywood as per IS 710:2010 and IS

5509:2000 fixed on frame work finish with 4mm thick Veneer & matt finish monocoat polish. The frame

work shall be made from square hollow aluminium anodised section size of 50x50x1.5 mm & 25x50x1.5

mm of approved make conforming to IS code. The framework shall be fixed as per drawing vertically @

mm c/c & horizontal 600 mm c/c horizontally. All ply/wooden shall be treated with anti- termite treatment .

Measurements for paneling work to be recorded upto finished false ceiling level only irrespective of

aluminium frame work, which shall be provided from gr. level to RCC slab / beams soffit level. Rates shall

also be inclusive of cost of making CNC/engraving /cut outs/ openings for electrical fixtures, tube lights /air-

conditioners ,grills, diffusers etc & providing additional sections for strengthening around the

13 openings/cutouts additional support for fixing of patch fittings for doors, making grooves between wall & 30 SMT 8120.00

board, in filled wit horizontally. All ply/wooden shall be treated with anti- termite treatment . Measurements

for paneling work to be recorded upto finished false ceiling level only irrespective of aluminium frame work,

which shall be provided from gr. level to RCC slab / beams soffit level. Rates shall also be inclusive of cost

of making CNC/engraving /cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills,

diffusers etc & providing additional sections for strengthening around the openings/cutouts additional

support for fixing of patch fittings for doors, making grooves between wall & board, in filled with termite

treated wooden members if required or as per drawing /instruction of EIC. and no extra payment shall be

considered for additional sections

Mirror Type 2 (Common Toilet): Providing and fixing 6 mm thick mirror of Saint Gobain/ Modiguard / Asahi

as per approved make shall be fixed with SS studs. Provision shall be made for conceal led light work as per

detailed drawing / instruction of architect complete. Rate shall be inclusive of frosting work as per detail

drawing.. ( Ante room & toilet) )

MD Cabin Door finish with Veneer with polish: Providing & fixing Single Leaf Flush Door 50 mm thick with

both side veneer finish with Polish; Door frame shall be from Ply with -Veneer with matt finish monocoat

polish, infill 25mm thick rockwool (48 kg/cumt density) with necessary vinyl gripper, necessary fittings.

Hardware fittings like concealed door closer Door handle, lock, Door stopper, Hinges etc. as per approved

15 make & sample. work complete including all type of hardware, fittings, fixtures etc shall be per approved 7 SMT 15525.00

make by Architect, bending, bidding, , safety measures as per instruction of Client/ Architect etc complete

as per detailed drawings and specifications. sample mock shall be approved from Architect/ Client. Basic

Rate for material veneer - 120 /Sq.ft.

Cabin Back side storage unit (750 H x 450 D) mm: Storage Comprising from IS 303 BWR 19 mm thick and

12 mm ply, finish with 1 mm thick Laminate finish as per approved make and shade by Architect. Storage

top : 35 mm thick post foam top edge finish as per selection and laminate as per selection suede /satin/VNR

finish. Solid Shutter : 25 mm thick comprising from IS 303 BWR ply & finish with 1 mm thick VNR Laminate

. Shelf: 19 mm thk IS 303 BWR ply finish with both side approved laminate. Inner area shall be finished

with linear laminate. Ledge/Niche comprising from IS 303 BWR ply finish with 1 mm thick Laminate

required lighting arrangement. The work shall be done as per the detailed drawing , specifications, sample

16 approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all 10 SMT 14375.00

material, labour, wastages, necessary tools & tackles, adhesives , grooves , consumable hardware &

required SS 304 grade hardware/accessories , Profile handle , Wooden frame, monocoat polish , pvc edge

banding , of approved make for all floors, all heights, all levels and all

places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No

additional claims will be entertained for this. Equivalent to VNR series laminate.

Providing and fixing acaustic wall panelling having aluminium grid framing of size 600mmx600mm by

aluminium pipes of size 50mmx45mm.Glasswool of 50mm filled in alugrid framing to create sound insulation

effect.& covered with 12mm thk plywood . top surface covering by 9mm thk plywood panelling to create C

groove of 9mm deep.All grooves are finished with dark laminate.All exposed surfaces covered with1mm thk

17 laminates of approved shade as instructed by Architect/Engineer In charge. Complete with all hardwares like 20 SMT 3000.00

nails, ss screws,adhesives etc.shown in detail drawings.

ContractorhastoprovidedallnecessarycutoutsforElectricalworks&noextra payment shall bemade for it.

ApprovedmakeArmstrong, Hunter Douglas / Peritex or equivalent.

Pantry below storage : Providing, making, fixing as per detail drawing made from 19 mm IS 710 BWP

ply structure and both side 1 mm th laminate finish shall be of approved make & shade and as per the

detail drawing. All the edges of ply shall be covered with Laminate finish Rate shall also inclusive of all

necessary brass satin finish nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm tower

bolts, ball catches/Magnet, The rate shall be inclusive of shelf both side laminated finish and as per detail

drawer unit with SS 304 grade kitchen basket as per selction by architect The rate shall be in sqm of

18 elevation area for all floors and at all heights including all costs complete as per the Architectural drawings & 2 SMT 15525.00

instructions.Only the elevation area of the storage unit will be measured and paid for. Item for laminate

fixing and polishing is included in this item. Approval of all loose material (sample of materials to be used) &

raw manufacturing to be got approved in advance from EIC & Architect prior to the final production of the

work. Manufacturing

shall in parts or as whole as per the requirements & or assembled at site as per the requirement and

directed by EIC & Architect. All material to be used

Providing and fixing Suspended ceiling in passage which includes Gypsteel ULTRA ™ CRP surface ribbed perimeter

channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed

to brick wall/partition with the help of nylon sleeves and screws, at 610mm centers Then suspending Gypsteel ULTRA™ CRP

surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with

Gypsteel ULTRA™ CRP surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion

fasteners(Mfg by Saint Gobain Gyproc). Then Gypsteel ULTRA™ CRP surface ribbed Ceiling section of having web of 51.5mm

and two flanges of 26mm each with lips of 10.5mm are then fixed to the Gypsteel ULTRA™ intermediate channel with the help of

connecting clip and in direction perpendicular to the Gypsteel intermediate™ channel at 457mm centres. Single layer of 12.5mm

19 tapered edge Gypboard® Plain (conforming to IS 2095 part 1 1996) is then screw fixed to ceiling section with 25mm drywall screws 230 SMT 1140.29

at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally

square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing

with Gyproc Jointing compound, Gyproc Joint Paper tape and two coats of Drywall Top Coat (as per recommended practices of

Saint- Gobain Gyproc India) Including making cutouts and providing supports for light fittings, diffuser, grill, speakers, smoke

detectors, sprinklers, extra framework for fittings & necessary vertical facia at drops, grooves, chamfering, moulding etc., as per

directions. Also inclusive of necessary fasteners & scaffolding at all levels.

Interior paint for wall & Ceiling :Providing & laying of three coats with Royale luxury Emulsion paint (soft

sheen,withteflonpaint)of Asian Paint or equivalent approved brand in shades and colour as directed on wall

surfaces to give an even shade incl. scaffolding to at any height with all labour and material after thoroughly

brushing the surface & making free from mortar dropings and other foreign matter including surface

preparation etc.complete. Including cost of all typeof tools, tackles,all labour,materials, transportation,

cleaning, at all floor,all level,all depth,all Height,all lead and lift,performance waranty certificate etc.work

complete as per the detailed drawing, approved sample, specifications and instruction ofArchitect/EIC.

Sample mock shall be approved from Architect/EIC.

Manual Roller blinds : ROLLER EOS 5-11 : WHITE-PEARL 5%

Fabric specification : Sunscreen mario fabric made up of 25% Polyester and 75% Polyester PVC coated 110tex Tilter

Basket weave of thickness 0.65mm ±5% (ISO 2286-3) and wieghing 465gsm±5%(ISO 2286-2)with openess factor of 3%

.The tear resistance (Warp 135N±10% & ,Weft 105N±10%) As per ISO 4674, and Fire, Smoke classification FR (US) -

NFPA 701 TM#1 &BS (GB) - 5867 Part2 TypeB & B1(CN)-GB50222. Bacterial & Fungal Resistance ASTM G21-09, ASTM E

2180-07 Reduce more than 99.9% of bacteria. Greenguard GOLD, EN71 Part 3:1994. Color fastness Grade 8 ISO105

B02:2014 >_4.0 AATCC TM 16.3-2014; Option 3; Xenon Arc lamp. SHGC (Fabric & Glass) 0.23 Fabric - White/Sand

System specification

The Roller blind system consists of 38mm OD extruded out of Aluminium alloy 6063 T6 with silver anodized to provide

an everlasting finish and luster, the rotary unit shall be 36mm in OD incorporating a clutch mechanism composed of

low – flexing braided polyster cord with nylon core, Control Ball chain shall be composed of braided nylon cord (2mm

dia) with high engineering grade plastic beads of 4.5mm diameter mounted co-axially on the cord with a pitch of

6.2mm (C-T-C) Bottom rail should be powder coated Aluminium flat bottom rail of 290 gm to finish it from the ends it

should have rail end caps. The clutch will be at the tube. The return end cap bracket shall incorporate snap spring

design to facilitate easy installation and removal for maintenance activities. The bracket shall be finished with a white

color on each side providing an aesthetic finish. It should handle up to 5 Kgs of material. The clutch should mount

flush to the face of the bracket which minimize the light gap between the shade and the window frame.

The rate shall be for complete item inclusive of providing & fixing, all material, labour, wastages, necessary tools &

tackles, hardware/accessories etc for all floors, all heights, all levels and all places within campus. Work comleted as

per approved sample by Architect/Client.

Supplying, fitting On Flooring With Chemical and fixing 8 mm thick Laminated wooden Flooring Work

conforming toEN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unlink/tongue-groove

locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-

density fibreboard (HDF) having density > 940 kg/m3 ubstratecoreoverares in saturated backing layer and

installing through unlink

or tongue- groove system(having locking strength not less than1000kg/m) over a 2mm thk under layer

polyurethane foam on polythene sheet250micron, over a smooth, flat, hard subfloor free from moisture

(<8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile,

reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per

direction & satisfaction of Engineer in charge. Cost of Laminate Floor with Accessories (Skirting, End edge,

Tmoulding,Reducer )shall be added as and when require. ln Ground FIoor: Category:HighFootfall ;Class

23;Abrasion resistance:- C4ThkonSwelling: <15%;Impact resistance:- IC2Shadeand texture shall be as

approved by MGVCL incharge/Architect (Basic rateof the Wooden Flooring:150/SQFTand Measurement

Should be Consider L X B ) waiting area, Center Area,Ant Room, Meeting Room )

Any item of GoG SoR of prevailing year / Approved Rate Analysis/Approved P.O.,W.O. / C.O. Circular etc.

For unforseen work.

Total Estimated Amount

Total Estimated Amount With GST

Executive Engineer

Baroda O&M Division