WBPWD/EE/PED/NIQ41/2020-2021

Amount

Supply & delivery of 8.5 Mtr long swaged type steel tubular pole (410 SP-16) with base plate

S & F 1.2 Mtr long 40 mm Dia Detachable type G.I Single Arm bracket with stifner plate, Pole Cap etc as required incl making through hole on bracket assembly for fixing the bracket rigidly on pole top. [NS]

S & F 1.2 Mtr long 40 mm dia detachable type G.I Double Arm bracket with stifner plate, pole cap etc as required incl making through hole on bracket assembly for fixing the bracket rigidly on pole top. [NS]

Supply & delivery of 8.5 Mtr long swaged type steel tubular pole (410 SP-18) with base plate

S&F MS square type structure(2 ft x 2 ft) made up of 40 x 40 x 5 mm MS angle and 40 x 5 mm MS flat incl painting with necy holes, nuts , bolts etc to be fixed with pole cap to be fixed on pole top for fixing three nos 120 watt LED flood light.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly

Upto 9.0 mtr. Size 0.6x0.6x1.70 mts [H-1/1(a)]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmmPVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. [H-5/H-5]

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole [H-1/3(a)(i)]

Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

Upto 9.0mtr. Long pole (a)1st coat of aluminium paint over 1 coat of RO priming [H-2/4 (a)(i)]

Upto 9.0mtr. Long pole (ii) 2nd coat of aluminium paint over 1st coat [H-2/4 (a) (ii)]

Painting of Arm brackets of length 1.2 Mtr 1st coat of aluminium paint over 1 coat of RO priming & 1st coat of aluminium paint over 1 coat of RO priming with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

a) Single Arm Bracket [NS]

b) Double Arm Bracket [NS]

Connection between loop box & the HPSV fittings with 2 x 2.5 sq mm PVC insulated copper conductor as to G.S.( for 8.5 mtr pole) [E-9/1(d)]

Supply & Fixing 230 V, MF-1 Starter on iron legs on wall incl. connecti (For Compound Light only) [NS]

Supply,erection & installation of outdoor hooded type KIOSK made of 3 mm thick MS sheet having height-1400 mm, width-1000 mm & depth-750 mm provided with gasketed double leaf double door arrangement. The doors should have both railway type locking arrangement as well as pad locking system. The Kiosk shoul be provided with four nos lifting lugs on opposite sides of vertical walls.The Kiosk to be provided with brass mesh for proper ventilation at the top at the fixed two vertical sides of the body of the Kiosk. The hood of the Kiosk should be extended sufficiently to prevent rain water infiltration through the brass mesh and the door leafs to be overlapped sufficiently to prevent rain water ingress inside the kiosk.There should have at least 2 (two ) nos earthing terminals provided on the opposite fixed vetical outer walls near the base.All inside and outside walls to be painted with two coats of synthetic enamel paint over one coat of R.O. primer. The kiosk to be erected on the brick pedastal of size 1600 mm x 1200 mm & height -600 mm having hollow space inside filled with dry sand and neat cemented finish with properly maintained slope on the outside to prevent water logging at the foot of the Kiosk provided with cable entry and exit facilities at the base of the pedastal. The metal structure should have self supporting and long angle iron legs having bifercation at the bottom for grouting inside the muffing of the pedastal.The kiosk to be provided with two layers of horizontally alligned 50 mm x 5 mm MS flats welded properly with the body of the kiosk in which each layer should have at least 4(four) nos of MS flats with holes provided with proper size of nuts and bolts for fixing switches and bus bars so that all switches and bus bar chamber can be fixed in door facing orientation.The Kiosk to be provided with the followings-

415 Volt, 100 amps Four pole on load change over switch with HRC fuses (Make-L & T) as incomming switch-1 no.

415 V, 200 amps,4 bar copper bus bar of size 20 mm x 5 mm with chamber of adequate size- 1 set., 20mm x 5mm x 4 No. [each 0.75mtr length]

415V, 100 A TPN SFU with 3 nos DIN type HRC fuses ( L & T )-3 Set

415V, 63 A TPN SFU with 3 nos DIN type HRC fuses ( L & T )-2 Set

415 V,32 Amps SPN main switch with HRC fuses (L & T)- 1 Nos.

EI Danger Board of size 12" x 8" - 2 sets

CTs of range 250/5 Amps -3 set

LED Indicating Lamps (R-Y-B) with fuse/SPMCB - 3 nos

All inter connections to be made with proper size of ' PVC insulatd Aluminium cables with proper socketing/aluminium flates having proper holes, nuts bolts as requires..

Supply of 4core/ 2 core XLPE insulated & Sheathed Armoured Aluminium Conductor cable for working voltage up 1100 Volts of following sizes. [Make-Gloster/Havells/Polycab/Crystal]

2 core 10 sqmm [For Compound Light] [NS]

4 core 120 sqmm [For incoming of panel] [NS]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [F-2/1(a)]

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2(a)]

Laying of one No. cable above 35 sq mm and upto 185 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammedLaying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [ F-2/1(b) ]

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting [C-3/19]

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall

32 A, 240 V DP with fuse on L & N [Make- Standard] [D-1/1(a)]

16 A, 240 V DP with fuse on L & N [Make- Standard] [D-1/1(a)]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex /RR kable] in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [E-14/1 (a) (i)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

2 core 10 sqmm [F-4/7(a)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

2 Core 10 Sqmm cable [F-5/8(b)(iii)

S & F Street LED light fittings complete with all accessories (MAKE-Crompton NEXUS STAR NEO - 120watt (LSTP-120-CDL-M) incl. necy connection as reqd. /equivalent make of Havells/ Bajaj. [NS]

S & F Street LED light fittings complete with all accessories (MAKE-Crompton ASTRA NEO- 30 watt (LSTS-30-CDL-M) incl. necy connection as reqd. /equivalent make of Havells/ Bajaj. [NS]

S & F LED Rectangular LED Flood Light fittings complete with all accessories with IP66 Proctections (MAKE-Crompton PLUTO NEO 120 Watt (LFLN-120-CDL-M/60) incl. necy connection as reqd. /equivalent make of Havells/ Bajaj. [NS]

Supply & Fixing 240 V, 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [E-6/17(a)]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

DP MCB 10 Amp & 32 Amp [ Make- Legrand] [D-6/7]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

25 mm dia [F-6/11(a)]

40 mm dia [F-6/11(c)]

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS

For Morum Soil [G-1/1(b) ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

By ISI Medium GI pipe [ Make- Bansal Uttarkarsh] [G-1/2(a)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

4SWG [G-2/5(a)(i)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. [G-2/4(a)]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [G-2/3(a)]

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1) [J-1/1]

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works [J-1/9]

Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work [J-1/11(a)]

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required [J-2/13]

Making soldered joints between conductors and down pipes/ other metallic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint [J-1/6]

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run [J-1/7]

Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 25 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works:

Length upto 0.5 Mtr [J-1/4(a)]

Excavation of soil for installation of Earth Electrode and filling & ramming. [G-1/1]

For Morrum Soil [G-1/1(b)]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: [G-1/2]

By ISI-Medium GI pipe [G-1/2(a)]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode [G/2/3(b)]

DEB SHANKAR LAYEK

RAHUL TRADERS