SPECIAL REPAIR OF ENTRANCE HALL STAIR CASE AND OTHER RELATED WORKS OF OFFRS MESS, EXTENSION OF PORCH (OFFICER MESS) AT 2 CBPO AND PROVN OF TOILET IN BARANAGAR UNDER GE (N) KOLKATA

Amount

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for vitrified ceramic coloured tiles (1600x800 mm) 7 to 8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles (450x300) x7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles (1600x800 mm) x7mm thick in vertical surface etc set and jointed with adhesive as per manufacturer's instruction and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed.

Material and labour for vitrified tiles 7 to 8 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm and nexc 0.38 of each tile in floor set and jointed in neat cement slurry & pointed in white cement ,shade light or dark and pigment to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) complete as specified and directed.

Material and labour for vitrified tiles 7 mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm as in skirting etc shade light or dark, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Material and labour for providing WPC Charcoal louver panel of approved make, design and shed in required size (100mm-200mm width, 12mm-15mm thick and 2400mm-3000mm length) having density 650-750 Kg/m3, water resistant, termite and borer proof, UV resistant panels to be fixed directly on wall, MS, Aluminium, treated sub frame with stainless steel screws, clips as per manufacturer's specification including necessary frame work expansion gaps, scaffolding, labour, tools, wastage, transportation, taxes etc complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Supply and fix in repair 12.0 mm thick toughened glass as in hinged doors, partitions, automatic doors and similar work including cutting to shpe drilling holes required each pane,complete all as specified and as directed.

Supply and fix in repair 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane, complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Supply and fix anodised aluminium snap grid frame work(size of 605x605mm) for false ceiling including suspenders/hangers 2 mm dia GI wire(upto 1200mm length) adjusting level fixed to roof shads by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified as per manufacturers instructions.

Supply and fix of 4 mm thick high pressure steam cured non- asbestos fibre cement designer ceiling board of size grid mould(605x605mmas specified above) and fix in grid mould with necessary fixing arrangement complete all as specified and as directed (Make: Everest/Rhino/charminar)

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars,window - cills, cooking plateforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in CM (1:6), including demolition of old one complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Material and labour for 75mm thick PCC (1:2:4) type B-2 using 40mm garded stone aggragate as in foundation,filling, sub base of floors etc including demolition of old PCC complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry as in floors including demolition of old tiles complete all as specified and directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine, washing down, removal of nail etc & filling cracks/hole with putty, and applying two coats of 100% Premium acrylic emulsion paint by spray machine on plastered surface, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed. Note : Guarantee of smart periodical shall be 5(five) years from the date of completion of the work.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall by vaccum based sanding machine, applying wall care putty min thickness 1 mm, (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil emulsion distemper white or coloured by Auto Roller over a coat of primer complete all as specified and directed and as per manufacturers instructions.

Material and labour for complete removal of existing treatment from old plastered surfaces of wall by Vaccum based sanding machine, removal of nails etc & filling cracks/ hole with putty, applying wall care putty upto 1mm thick as required ( Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller over a coat of primer complete all as specified and directed and as per manufacturers instructions.

Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in any description & in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Surface excavation n.exc.30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified & directed.

Excavation in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in Soft/loose soil complete all as specified & directed.

Material and labour for providing cement concrete 1:4:8 type D2 ( using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed

M&L for reinforced cement concrete M-25(design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25(design mix) as in columns, pillars, piers,posts and struts etc complete all as specified and directed.

M&L for reinforced cement concrete M-25(design mix) as in slabs supported on walls, beams, columns, in floors, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick ( horizontal or sloping) complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item no 34 above but 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders complete all as specified and directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar (1:4) complete all as specified and as directed.

Material and Labour for 20 mm thick rendering with CM 1:4 in two layers, 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed. ( Note: Water proofing liquid admixture shall be measured and paid seperately )

Supply only integral water proofing liquid admixture for concrete / mortar (Make: CONPLAST X421IC of Fosroc/ PLASTOCRETE PLUS of SIKA or equivalent brand of PIDILITE)

Material and labour for 5 mm thick plastering in CM (1:3) on ceiling, including finish the surface even and fair without using extra cement complete all as specified and as directed

Material and labour for applying two coats of 100% Premium acrylic emulsion paint on newly plastered surfaces of wall by spray machine after cleaning the surface by Vacuum based sanding machine, washing down etc having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. Note : Guarantee of smart periodical shall be 5(five) years from the date of completion of the work.

M&L for applying 1.00mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to newly plaster of ceiling complete all as specified and as directed.

Returning filling in, including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil complete all as specified & directed.

Removing excavated soil n.exc 50 mtr and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified .

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry as in floors complete all as specified and directed.

M&L for Hardcore of gauge exc.63mm but n. exc 100mm by using stone aggregate, deposited, spread and levelled in layers n.exc.15cm thick, watered, well rammed to a true surface complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 using 40mm garded stone aggragate as in foundation,filling, sub base of floors etc complete all as specified and as directed.

M&L for reinforced cement concrete 1:1.5:3 type A1 ( using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A1 ( using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A1 ( using 20mm graded stone aggregate) as in slabs supported on walls, beams, columns, in floors, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type A1 ( using 20mm graded stone aggregate) as in columns, pillars, piers,posts and struts etc complete all as specified and directed.

M&L for use and waste of formwork to sides and soffits of floor beams and roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhang, etc. also splays between floor and beams etc. complete all as specified and directed.

M&L for use and waste of formwork to edges of concrete roof slabs and chajjas n exc 20cm wide complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for applying 1.00mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to newly plaster of wall complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:4:8) type D-2 using 40mm garded stone aggragate as in sub base of floors etc complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation , complete all as specified and directed.

Material & labour for 40mm thick cement concrete ,1:2:4 type B-1 using 20mm graded stone aggregate as in flooring and finished the surface even & fair complete all as specified and as directed

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection, laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand) and finished the surface fair and even complete all as specified & directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube & fixing in the opening as per specification & drawing complete all as specified and directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles)with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face ,with particle board core ,supplying and fixing in frame at site as per specification and drawing complete all as specified and directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed.

S&F 15 mm bore Steel water tubing, 'medium grade', galvanised , with all fittings ; and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20 mm dia Steel water tubing, 'medium grade' ,galvanised , with all fittings ; and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and as directed.

M&L for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs UPVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints laid in trenches complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2(using 40 mm graded stone aggregate) bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150 mm dia pipe complete all as specified and as directed.

Cutting into exisiting manholes for connecting new drain pipe, making good and rendering, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished , and reforming benching as required complete all as specified and as directed.

S&F 100mm( outer dia) Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 100mm( outer dia) cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipe in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipe in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

Supply and fix 100mm bore cast iron cowls complete all as specified and as directed.

Supply and fix vitreous china wash down water closet pan semi pedestal pattern (Anglo Indian type) , white including 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and as directed.

Supply and fix one piece-white wash basin with pedestal 550 x 400mm (oval/square) alongwith brackets / MS nuts and bolts for fixing; fixed with CP waste coupling and connecting waste pipe etc complete all as specified and directed.

S&F waste fittings, 32mm, brass chromium plated for glazed ware sink, basin etc. with long screwed shanks and fly -nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fix pillar cock of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix stop cock concealed type, 15mm bore, fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix angular stop cock of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed

S&F 15 mm PVC connections with PTMT nuts of length 600mm complete all as specified and directed.

S&F Vitreous china half stall semi oval type urinal flat back of size 710 x 330 x 450mm white including chromium plated fancy type urinal spreader with grating and union for discharge pipe and complete including providing plugs, bedding urinals against wall in CM (1:2), securing urinal to plug with and including 60 mm long brass screws, pointing around urinal back in cement, grating, union for discharge pipe and waste pipe complete all as specified and directed.

Supply and fix health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar or equivalent.

Supply and fix chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and as directed.

Supply and fix grating doom 125mm dia of PTMT (Minimum wt 25 gm) complete all as specified and as directed.

Supply and fix brass chromium plated shower rose of 125mm size fixed in 15 mm dia pipe complete all as specified and directed.

Supply and fix Rotational moulded polyethylene water storage tanks (multi layer) 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix powder coated anodised aluminium glass louver /ventilators with blades of 10mm heavy duty with lever handle etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)

Supply and fix 4mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to wooden frame complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirement mixed with integral water proofing liquid admixture as per manufacturer's instructions complete all as specified and as directed. Note : (i) Minimum thickness of PCC shall be 50mm. (ii) Integral water proofing liquid admixture shall be measured and paid separately under appropriate item.

Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment :- (a) Apply bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces complete all as specified. (MAKE : Pibial Primer of TEXSA or equivalent product of BITUMAT/ BITUNIL/SIKA/Hindcon/Asian) (b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 4 Kg of TEXA/WP Shield 103 PM of SIKA/Hindcon/Asian or Equivalent material of BITUNIL/BITUMAT. (Note :- Cost of cutting groove to parapet wall for inserting APP membrance and filling groove with cement mortar (1:3) is deemed to be included in the quoted rate.)

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside to store in safe custody or for taking credit including making good of the disturbed surfaces complete all as specified and directed.

Material and labour for point wiring (Concealed type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC rigid conduit (medium grade) of adequate size with fittings and accessories pressed steel sunken terminal box made out of GI sheet concealed in wall for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed. (Note: Chases cutting and making good the disturbed surfaces to match with the existings shall deemed to be included in the quoted rate)

All as per item No 102 here in above but for One light point controlled by two way switch complete all as specified and as directed.

All as per item No 102 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.

All as per item No 102 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 102 here in above but for One bell/buzzer point controlled by one push button on the same board with other switches complete all as specified and as directed.

Material and labour for point wiring (Concealed type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories pressed steel sunken terminal box made out of GI sheet concealed in wall for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and as directed. (Note: Chases cutting and making good the disturbed surfaces to match with the existings shall deemed to be included in the quoted rate)

Material and labour in repair for sub-main wiring (Concealed type) with FRLSH two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as earth continuity wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site complete all as specified and as directed. (Note: Three run of 6.0sqmm copper conductor and One run PVC conduit including chase cutting and making good the disturbed surface shall measured as one unit)

Material and labour in repair for sub-main wiring (Concealed type) with FRLSH two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as earth continuity wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site complete all as specified and as directed. (Note: Three run of 4.0sqmm copper conductor and One run PVC conduit including chase cutting and making good the disturbed surface shall measured as one unit)

Supply & fix Modular switch, one way, 6 Amp, 1 module complete all as specified and directed.

Supply & fix Modular switch, one way, 16 Amp, 1 module complete all as specified and directed.

Supply & fix Modular switch, two way, 6 Amp, 1 module complete all as specified and directed.

Supply & fix Modular bell push, 6 Amp, 1 module complete all as specified and directed.

Supply & fix Modular socket, 6A/16A-2/3 pin combined 2 Module complete all as specified and directed.

Supply & fix Modular electronic fan stepped regulator, 120 watt, 2 module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 1 Module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 2 Module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 3 Module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 4 Module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 6 Module complete all as specified and directed.

Supply and fix Modular white cover plate with metal frame- 8 Module complete all as specified and directed. Note : Make for item no 110 to 121 Myrius/ Living now of Legrand or equivalent in GM/Anchor/Crabtree

Supply and fix ceiling rose PVC insulated body, three terminals complete all as specified and directed.

Supply and fix bell push, flush type 6 Amps complete all as specified and directed.

Supply and fix in replacement Musical call bell, AC, 230V single pole complete all as specified as directed.

Supply & fix in replacement Endura Linear Pro batten surface mounting general purpose aluminium battens with best in class luminaire efficacy. These Extruded aluminium housing battens are equipped with high specification CISPR 15 compliant electronics driver and mikly white, special polycarbonate diffuser for glare free efficient light distribution complete all as specified and as directed. (Make : HAVELLS CAT NO-ENDURALINEARPROBS20WLED865SPCSSIND, HSN CODE -9405/Crompton CAT No-CCS-100-20-65-HL2-DP-NWH or any equivalent make as per PS).

Supply & fix in replacement Plano Taps/Taps POP a versatile 2x2 recess/surface mounted luminaires which suitable various ceiling type 35mm depth with tapered housing makes is most flexible to install in low clearance ceiling. Unique Dual Optics-Primary Individual PMMA Lens on LEDs) & Secondary (Opal diffuser) to ensure homogeneous uniform lighting distribution and unmatched visual comfort complete all as specified and as directed.

Supply and fix in replacement LED light fitting, 1x10/1x9w bulk head luminaries, with LED lamp, etc. complete with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix indoor commercial LED Luminaires Intelligent, modular high efficacy LED 2x2 luminaire with integrated PIR sensor which offers autonomous operation and provides soft-light and glare free symmetrical ilumination suitable for Armstrong/Grid ceiling complete all as specified and as directed. (Make: HAVELLS Cat No.VENUSNEOHE2x2R36WLED857PIRSENSOR. HSN CODE-8405/CROMPTON Model No LCTLRNM-36-FO-CDL. or any quivalent make as per PS)

Supply and fix Lumiline smart batten with a smart range of aesthetically designed LED batten having extruded Aluminium housing with Microwave motion technology for providing an energy efficient solution and with aluminium housing & integrated electronic driver complete all as specified and as directed. (Make: HAVELLS Cat No. LUMILINESMART20WLED865PCWH. HSN CODE 9405 or any quivalent make as per PS).

Supply and fix in repair vertical TPN DB with MCCB incomer of 4 way in double door suitable for four pole MCCB (63A/100A) as incomer including MCCB+12 modules incoming and outgoing making good the damaged surface/wall including reconnection with existing earth wire to DB complete all as specified and as directed. (Note:- MCCB shall be measured and paid seperately). (Make: Cat No. 507745 of Legrand or equivalent in L&T/Hager/Schneider)

Supply and fix in repair MCCB triple pole & neutral 40-100 amps,16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door with proper size of aluminium lugs complete all as specified as directed. (Make: Cat No 420015, of Legrand or equivalent in L&T/Hager/Schneider)

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA, complete all as specified and directed.(Cat No 408587-95, Make: Legrand or equivalent in L&T/Hager/Schneider)

S & F LED building security light fitting 35W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having seperate driver compartment with IP65 protection and impact resistance of IK07 including mounting bracket of suitable size complete complete all as specified and directed.

Supply & fix in replacement modular type power unit 16 amps with 4 module plate, starter plug and socket complete all as specified and directed. (Make-Legrand Model No 673030 & 673045 or equivalent.)

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep, 35 watt. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) including taking down old unsv fan and deposit to E/M store complete complete all as specified and directed. (Make BAJAJ/CROMPTON/HAVELLS or equivalent)

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I complete all as specified as directed.

RBS Builders (BID ID -3492749)

RADHA ENTERPRISE (BID ID -3491857)

JHAWAR SUPPLIERS (BID ID -3491890)

MOTHER LUMIER INDUSTRIES (BID ID -3494764)

PODDAR SALES CORPORATION (BID ID -3495294)