Re routing 11 KV line using ABC from Oyoor Kizhakke Jn to Kalavayal 1and 2 Transformers under Electrical Section Oyoor of Electrical Division Kundara

Fitting and erecting one HT PSC pole in position incl. fitting cross arm, digging & back filling pit,drawing earth leads

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11KV DP incl. conveyance of materials.

Transporting poles by hired vehicle to a distance up to 5km and carrying up to 4 poles excluding loading & unloading

Loading HT PSC pole from stacking place and unloading the same at work site (transport by vehicle)

Additional rate for excavation of one pit for HT pole/HT stay in Hard Laterite

Fitting one Additional 75x40mm, 1.8m channel cross arm in existing single pole incl. conveyance of materials

Additional rate for excavation of Pit for A type pole in Hard Laterite

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and erecting one HT A type pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads

Fitting and providing one HT stay for 11KV pole incl. digging and back filling pit

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Fitting one set AB switch and giving connection

Drilling hole of various sizes on existing Channel/Cross arm

Additional rate for excavation of one Pit for HT Pole/HT stay in Laterite

Fitting one set (3 No) 11 KV LA and giving connections excluding earthing

Dismantling ( without damage) one LT PSC/RCC pole after disconnecting stays, strut, etc. and stacking the same

Additional rate for excavation of one pit for HT pole/HT Stay in Soft Rock.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all materials(as per specification)

Stringing of 11 kV Aerial Bunched cable of size 3x120+1x95 sqmm with bare/insulated messenger through existing poles

Erection of Anchor clamp/dead end clamp for 11 KV ABC of any size

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc.and stacking the same.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arm, digging & back filling pit, drawing earth leads.

Transferring LT S ph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole

Erection of suspension clamp for 11 KV ABC of any size

Transferring LT 3 ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole

Dismantling and reconnecting S ph service connection from the OH line incl.lowering down the WP portion

Doing one cable end termination on HT ABC of sizes upto 3x150+1x120 sqmm

Dismantling and reconnecting 3 ph service connection from the OH line incl.lowering down the WP portion

Providing one coil earth using GI earth wire ,digging separate pit at standard distance away from the pole/structure and backfilling

Fitting and providing one strut using HT PSC pole incl.digging and backfilling pit

Providing one earth using earth pipe incl.digging separate pit at standard distance away from the pole/structure &backfilling

Fitting one no MVT on existing cross arm excluding termination work ( for one phase) of any rating for 11 KV AB cable

Please Enable Macros to View BoQ information