GE/KHU-38/2021-2022 SPECIAL REPAIR TO BUILDING OF 8 MTN DIV SIG REGT AND PROVN OF HARDSTANDING (20 FEETX20 FEET) AT ARTY BDE AND PROV OF UTENSIL WASHING POINT AT SATA BTY IN THE AOR OF AGE B/R-I KHUMBATHANG, UNDER GE KHUMBATHANG

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in sub base and finishing the surface even and smooth without using extra cement complte all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including cement screed base or bedding layer 20 mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completecomplete, all as specified and directed

Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50 Sqm each complete all as specified and directed..

S&F steel windows with side hung shutters including projecting type hinges with steel handle,and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle,and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F mild steel works as in framed work such as grills grating etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railings framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4.8 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.

Dismantling wall and ceiling boards (fibre,pulp,insulation,etc) or insulation boards/slabs/blankets,any thickness including cover fillets complete all as specified and directed.

Dismantling timber scantling in fillets,posts,rafters,purlins etc under 40 Sqcm in section in any position unframed work complete all as specified and directed.

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed..

M&L second class soft wood, plain fillets, square or rectangular in section of area exc 6 and n exc 13 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed.

M&L second class soft wood, plain fillets, square or rectangular in section of area n exc 3 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed.

M&L 9mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

M&L hard core of broken stone or boulders of gauge exc 63 mm but n exc. 100 mm, deposited spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:5:10 type E2 (using 40 mm graded coarse aggregate) for mass concrete as in sub base or similar works complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick cement concrete work in pavement/ hard standing of flexural strength 40 kg/per square centimetre in field using 400kg of cement per cubic metre thickness of concrete complete all as specified and directed by Engr-in-Charge.

M & L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘A’ in 100 mm thick concrete slab complete all as specified and directed by Engr-in-Charge.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed by Engr-in-Charge.

M&L for removing excavated material exc 250 m but n.exc 500 m and depositing where directed complete all as specified and directed by Engr-in-Charge.

M&L Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed by Engr-in-Charge.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete all specified and dirtected by Engr-in-Charge .

M&L for chequered cement concrete tiles of size 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge .

S&F rolled MS as in rolled section conforming to grade Fe-410-W(Gde-E-250) quality 'B' as in framing for cladding, ceilling like fixed with angle iron cleat and connecting plate incl welding to each section to frame all as specified and directed by Engr in Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed by Engr in Charge.

M&L for Preparation of new steel and iron surfaces of any description exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer (shop coat), all as specified and directed.

S & F vitreous china wash basin, flat back, size 550 x 400 mm including waste pipe , brackets, CP brass waste fitting and cutting for & pinning in ends of brackets or errecting stand but excluding taps, chain and plug, etc. complete all as specified and directed by Engr-in-Charge.

S&F Pillar taps, 15mm Bore dia of pipe, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 1000 Ltrs capacity triple layered (cylinderical/vertical with closed top) hoisted and fixed in position, inside or outside the building, including minor repairing to iron pipe for making connections and securing access cover complete all as specified and directed.

S&F 15mm bore Bib tap CP, brass cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe etc complete all as specified.

S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

S&F Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Deduct Credit for Demolished/Dismantled material Rs (-) 20,298.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

KASHMIR FAIR DEAL SERVICES

M/S HIGHLAND ENGINEERING

M/S SK TRADERS

M/S KHARZONGLA ENTERPRISES

AMAR MOTOR GARAGES

M/S DUTTA ENGINEERING WORKS

MOHD HUSSAIN