Miscellaneous Engineering Works of Zone D3

Amount

Supplying the following artisan staff to attend maintenance works in all floors etc., as directed by the Engineer-in-charge complete.

(a) Mason 1st Class

(b) Fitter 1st Class

(c) Man Mazdoors

(d) Women Mazdoors

(e) Painter 1st Class

(g) Carpenter Ist Class

Earth work in excavation in soft/loose soil over areas (exceeding 30 cm. In depth 1.50 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50m and lift upto 1.50m disposed earth to be levelled and neatly dressed etc., as required and as directed by the Engineer-in-charge complete.

Earth work in excavation in Hard/Dense soil in foundation trenches or drains not exceeding 1.50 m. in width and for wells man holes and the like not exceeding 10 sq.m. on plan including dressing of sides and ramming of bottoms lift upto 1.5m. including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50 m. etc., as required and as directed by the Engineer-in-charge complete.

Earth work in excavation in soft/loose soil in foundation trenches or drains not exceeding 1.50m in width and for wells man holes and the like not exceeding 10 sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil within a lead of 50mt etc., as required and as directed by the Engineer-in-charge, complete

Surface dressing of the ground in Hard/Dense soil including removing vegetations and inequalities not exceeding 15 cm. deep and disposal of rubbish lead upto 50 m. and lift upto 1.5m. etc. as required and as directed by the Engineer-in-charge complete.

Surface dressing of the ground in soft/loose soil including removing vegetations and in equalities not exceeding 15 cm. Deep and disposal of rubbish lead upto 50m and lift upto 1.5m etc. as required and as directed by the Engineer-in-charge complete.

Filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc., in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering, lead upto 50 m. and lift upto 1.5m. etc., as required and as directed by the Engineer-in-charge, complete.

Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing etc, as required and as directed by the Engineer-in-Charge complete. All labour and materials.

Clearing jungle including uprooting of rank vegetation grass brush wood, trees and saplings of girth upto 30 cm. Measured at a height of 1 m. above ground level and removal of rubbish upto a distance of 50 m. outside the periphery of the area cleared etc., as required and as directed by the Engineer-in-Charge complete

Felling trees of the girth (measured at a height of 1 m. above ground level) including cutting trunks and branches removing the roots and stacking of serviceable materials and disposal of unserviceable materials etc., as required and as directed by the Engineer-in-Charge complete.

beyond 30 cm girth upto and including 60 cm girth

beyond 60 cm girth upto and including 120 cm girth

beyond 120 cm girth upto and including 240 cm girth

Bailing out water from foundations / pipe line trenches with oil engine driven pumps sets including hire charges, fuel charges and wages for the driver and helper etc., as required and as directed by the Engineer-in-Charge, complete. All hire and operational charges

Shoring and strutting for foundation / pipe line trenches single staging up to 2.50 mt etc., as required and as directed by the Engineer-in-Charge, complete. All labour and materials.

a) single staging 0.0m to 2.50 m

b) double staging 2.50 m to 4.50 m

Plain Cement concrete 1:4:8 nominal mix (using 170 Kgs. of cement per m3 of finished concrete) using 40 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing, curing etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials.

Plain Cement Concrete M 20 mix using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating or tamping, finishing, curing etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials.

Plain Cement Concrete M 20 mix using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating or taping, finishing, curing etc., including necessary form work (boxing) etc., as required. and as directed by the Engineer-in-Charge complete. All labour and materials.

Repair grouting 20 cm. Depth to aprons and revetments with cement concrete 1:3:6 nominal mix (using a minimum 220 kgs. of cement per m3 of finished concrete) using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing depositing in position , tamping, finishing, curing and pointing with cement mortar 1:3 etc., as required and as directed by the Engineer-in-charge complete. All labour and materials.

Supplying, placing and maintaining in position ribbed tor steel or mild steel reinforcing bars varying from 6mm to 40 mm. dia including straightening cutting, bending, tying grills, with annealed steel binding wire of 18 gauge (1.22 mm dia) including cost of binding wire, transportation to site etc., as required and as directed by the Engineer-in-charge complete. All labour and materials.

RCC M-20 mix in precast slabs, fencing posts etc., using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position tamping, finishing, curing, cost of super plasticizer etc, including necessary boxing as required lifting and placing in position etc. as required and as directed by the Engineer-in-Charge complete. All labour and materials but excluding cost of reinforcement.

Plain cement concrete 1:3:6 nominal mix (using 220 kg. of cement per cum of finished concrete) using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing and depositing in position, vibrating or tamping, finishing, curing etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials.

Plain cement concrete M 20 mix using 12 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing depositing in position, vibrating or tamping, finishing, curing etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials.

Plain cement concrete M-20 mix using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, vibrating or tamping, finishing curing etc., in encasing rail posts and structural steel members, staircase steps, copings or similar type of works including boxing etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials.

Providing brick work in CM 1:4 in superstructure using approved quality standard bricks of Class Designation-35 including scaffolding, lift, curing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials.

Providing RR masonry in CM 1:5 in plinth and foundations including necessary dressed stones at corners and junctions curing etc., as required and as directed by the Engineer-in-charge complete. All Labour and materials

Providing half brick masonry in CM 1:4 in super structure using approved quality standard bricks of class designation-35 including scaffolding, lift, curing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials .

Providing brick work in CM 1:5 in plinth and foundations using approved quality standard bricks of Class designation 35 including curing etc., as required and as directed by the Engineer-in-charge complete. All labour and materials.

Providing RR masonry in CM 1:5 in superstructure including necessary dressed stones at junctions, corners, jambs and sills of doors, windows etc., scaffolding lift curing etc., as requied and as directed by theEngineer-in-charge complete. All Labour and Materials..

Supplying plain glass 4 mm thick at site etc., as required and as directed by theEngineer-in-charge complete. All Labour and materials.

Supplying plain glass 3 mm thick at site etc., as required and as directed by the Engineer-in-charge complete. All Labour and Materials.

Supplying plain glass 5.50 mm thick at site etc., as required and as directed by the Engineer-in-charge complete. All Labour and materials.

Supplying plain glass 6 mm thick at site etc. as required and as directed by the Engineer-in-Charge complete. All labour and materials

Supplying frosted glass 4 mm thick at site etc., as required and as directed by the Engineer-in-chargecomplete. All Labour and materials.

Shelves and planks of sal or maddi wood including necessary brackets of wood and fixing to wall etc., as required and as directed by the Engineer-in-chargecomplete. All labour and materials.

Supplying and fixing MS Bars including MS flats at required spacing in wooden frames of windows, ventilators etc. as required and as directed by the Engineer-in-charge complete. All labour and materials.

Fixing glass panes of 3 mm to 6 mm thick in steel windows, ventilators, glazed partitions etc., including polishing after fixing etc., as required and as directed by the Engineer-in-charge complete. (labour charges only) but including cost of putty or wooden fillets or clips as required.

a) Ground floor

b) First floor & Second floor

c) Third floor

d) Fourth floor

Supplying and fixing 1.00 mm thick sun mica (lamination sheet) of approved pattern to the existing flush door duly removing the flush door from door frame and removing the existing old pealed off sun mica and fixing the new sun mica sheet to the door shutters with fevicol SR solution and refixing the door shutters to its original position including the cost of fevicol SR solution screws etc., as required and as directed by the Engineer-in-charge complete. All Labour and materials.

Supplying and fixing GI fly proof mesh to doors, windows, cup boards etc., including fixing etc., as required and as directed by the Engineer-in-charge complete. All Labour and Materials. but excluding frame work.

Supplying and fixing meat safe shutters fully fly proof GI Mesh over approved sal wood scantlings of 80 x 30 mm size including approved oxidised iron fittings such as butt hinges, tower bolts, handles, hooks and eyes etc., as required and as directed by the Engineer-in-charge complete. All Labour and Materials. but excluding frame work.

Supplying and fixing hydraulic door closures of approved make and quality including necessary screws etc., as required and as directed by the Engineer-in-charge complete. All Labour and materials

Supplying and fixing of anodised aluminium doors etc., of standard sections of INDAL or equivalent joints mitred and welded manufactured to relevant I.S. standard specification including providing and fixing 4 mm thick plain glass, rubber packing, glazing clips, anodised aluminium beading, fittings such as hinges, handles etc. as required and as directed by the Engineer-in-charge, applying and removing laequer coat complete. All labour and materials.

Supplying and fixing of anodised Aluminium windows side hung fully openable with glazing bars etc., of standard sections of INDAL or equivalent joints mitred and welded manufactured to relevant I.S. standard specification including providing and fixing 4 mm thick plain glass, rubber packing, glazing clips, anodised aluminium beading, fittings such as hinges, handles etc. as required and as directed by the Engineer-in-charge, applying and removing laequer coat complete. All labour and materials

Supplying and fixing of Aluminium windows sliding etc., of standard sections of INDAL or equivalent joints mitred and welded manufactured to relevant I.S. standard specification including providing and fixing 4 mm thick plain glass, rubber packing, glazing clips, anodised aluminium beading, fittings such as hinges, handles etc. as required and as directed by the Engineer-in-charge, applying and removing laequer coat complete. All labour and materials.

Supplying and fixing of Aluminium louver ventilators with adjustable louvers etc., of standard sections of INDAL or equivalent joints mitred and welded manufactured to relevant I.S. standard specification including providing and fixing 4 mm thick plain glass, rubber packing, glazing clips, anodised aluminium beading, fittings such as hinges, handles etc. as required and as directed by the Engineer-in-charge, applying and removing laequer coat complete. All labour and materials.

Supplying and Fixing glass 4mm thick, glass panes in steel windows, ventilators, glazed partitions etc., including polishing after fixing etc., complete. Labour charges only but including cost of putty or wooden fillets or clips as required and as directed by the Engineer-in-charge, complete. (a) Ground Floor

Supplying 300 mm long aluminium aldrop (16 mm dia) ISI Mark at site of work etc., as directed by the Engineer-in-charge complete. All labour and materials

Supplying 250 mm long aluminium aldrop (16 mm dia) ISI Mark at site of work etc., as directed by the Engineer-in-charge complete. All labour and materials.

Supplying 300 mm long aluminium tower bolt (10mm dia) ISI Mark at site of work etc., as directed by the Engineer-in-charge complete. All Labour and Materials.

Supplying 250 mm long aluminium tower bolts (10 mm) ISI Mark at site of work as directed by the Engineer-in-charge complete. All Labour and Materials.

Supplying 150 mm long aluminium door handle ISI Mark at site or work as directed by the Engineer-in-charge complete. All Labour and Materials.

Supplying 300 mm long aluminium door latches ISI Mark at site of work as directed by the Engineer-in-charge complete. All Labour and Materials.

Supply of glass putty at site of work and as directed by the Engineer-in-charge complete All Labour and Materials.

Supplying of Aluminium butt hinges 100 mm long Of ISI mark for PVC doors at site of work etc., as directed by the Engineer-in-charge complete. All Labour and Materials.

Supply of aluminum fixtures of ISI mark at site of work to doors and windows with nettlefold screws or bolts etc., as directed by the Engineer-in-Charge complete. All labour and materials.

a) Aluminium tower bolt 10 mm dia 100 mm long

b) Aluminium tower bolt 10 mm dia 150 mm long

c) Aluminium tower bolt 12 mm dia 300 mm long

d) door stopper

e) aluminum tower bolt 75 mm long

f) aluminum hinges 75 mm long

g) aluminum hinges 150 mm long

Supply of Aluminum handles 100 mm long including nettlefold screws as per ISI mark at site of work etc., as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and fixing godrej or equivalent make 6 levers 75 mm size mortice lock with handles etc., at site of work as directed by the Engineer-in-charge, complete. All labour and materials

Supply of godrej multipurpose furniture locks at site of work etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials.

Supplying and fixing 2/3 weld mesh of 75 x 25 mm size with 5mm x 3.15 mm dia wire & 1/3 panelled sal wood double leafdoor shutters external or internal 35mm thick as per I.S. 1003 (Part-1) or of approved make including necessary approved oxidised iron fittings such as Butt hinges, tower bolts, handles, aldrops, door latches, locking arrangements, nettle fold screws, bolts, wooden stoppers, etc., as required and as directed by the Engineer-in-charge and as per standards complete. All labour and materials but excluding framework.

Supplying and fixing nylon flyproof mesh to doors windows, cupboards etc., including fixing as directed by the Engineer-in-Charge, complete. All labour and materials but excluding frame work

Removing of existing glass panes and refixing with tinted glass of 5mm thick of approved quality anodised aluminium windows including providing rubber beeding, aluminium brasing etc., including scaffolding all leads and lifts etc., as directed by the Engineer –in-charge complete. All labour and materials.

supplying and fixing meat safe shutters fully fly proof G.I. mesh over approved teak wood scantlings of 80x30mm size including approved oxidised iron fittings such as butt hinges, tower bolts, handles, hooks, and eyes, etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials but excluding frame work.

Providing shell series of M/s Marc Sanitation Pvt. Ltd., or equivalent etc., at site of work as directed by the Engineer-in-charge complete. All labour and materials.

a) Pillar cock (chrome plated)

b)bib cock long (chrome plated)

c) concealed stop cock 15mm (chrome plated)

d) Concealed flush valve-push /lever type 32 mm (chrome plated)

e) Towel ring (chrome plated)

f) Towel rail 24" (chrome plated)

Supplying and Fixing ornamental MS grills of approved pattern using MS Square or round bars and MS flats etc., of approved size to doors, windows, jafferies, balconies, gates etc. as directed by the Engineer-in-charge complete. All Labour and Materials.

Fabricating, welding or riveting or bolting steel built up sections, trusses and framed work including cutting, drilling holes, hoisting fixing in position and applying a priming coat of red oxide paint etc, as directed by the Engineer-in-charge complete. All Labour and Materials. but excluding cost of steel

Supplying and fixing welded steel wire mesh of size 75 mm x 25 mm and dia of wire 5mm x 3.15 mm etc., as directed by the Engineer-in-charge complete. All Labour and Materials. (excluding frame work)

Repairs to rolling shutters such as welding of shaft etc., greasing, repairs to the panels and putting the shutters in working condition etc., as directed by the Engineer-in-charge complete.

Supplying and fixing 18 gauge TMS panels (Blades) to rolling shutters etc., as directed by the Engineer-in-charge complete. All labour and materials.

Welding of mild steel rails, angles, grills, rods, channels etc. as directed by the Engineer-in-charge complete. All Labour and Materials..

Providing and fixing GI tubular gate (double shutters) with 40 mm dia GI pipes and specials including diagonal pipes and frame welded to approved weld mesh of 75 x 25 mm size (3.15 mm x 5 mm dia) including painting with one priming coat and two coats of synthetic enamel paint of approved colour and shade (total 3 coats ) etc., with locking arrangements, necessary MS flats, iron pintels etc., including fixing in CC bed blocks as directed with 12 mm dia bolts and nuts, washers etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials.

Supplying and fixing rolling shutters as per IS 6248 including hood cover 1mm thick, bracket plates, pipe shafts, pulleys, springs, ball bearing guide channels 3.15mm thick lock plates 3.15mm thick with handles, sliding locks at either end hold fasts, stoppers etc., as required and as directed by the Engineer-in-charge and finished with a coat of redoxide primer complete. All labour and materials.

a) Self coiling type (push pull type ) or manual type 18 guage (1.25mm) lath section

b) Gear operated type with crane handle 18 guage (1.25mm) lath section

Flooring 25 mm. thick with CC 1:2:4 nominal mix (using 12.2 kgs. Of cement per m2) using 12.5 mm. graded granite metal of approved quality. as coarse aggregate and river sand as fine aggregate including mixing, depositing in alternate panels tamping, finishing, with a floating coat/rendering neat and smooth with cement including cement slurry curing etc., as directed by the Engineer-in-Charge, complete. All labour and materials.

Rendering smooth the surface using 1 Kg. of cement per m2 of area including thread lining curing etc., as directed by the Engineer-in-charge complete. All Labour and Materials.

Flooring with CC 1:2:4 nominal mix using 20 mm graded granite metal of approved quality as coarse aggregate and river sand as fine aggregate including mixing, depositing in alternate panels, tamping finishing with a floating coat rendering neat and smooth with cement including cement slurry curing etc. as directed by the Engineer-in-charge complete. All Labour and Materials.

a) 50 mm thick (using 20.2kg of cement per m2)

b) 40 mm thick (using 17.0 kg of cement per m2)

Supplying and fixing commercial quality pressed ceramic Tiles of minimum thickness 8 mm for greater than or equal to 30 x 30 cm size and 7 mm forless than or equal to 20 x 30 cm size with water absorption greater than 10% confirming to IS 15622 -2006 of approved pattern colour and shade glazed or unglazed tiles for walls and raisers of steps laid on a bed of 12 mm thick CM 1:3 including pointing with white or colour cement, curing etc. as required and as directed by the Engineer-in-charge, complete. All Labour and Materials.

Supplying and fixing commercial quality tiles pressed ceramic tiles of minimum thickness of 8 mm forgreater than or equal to 30 x 30 cm size and 7 mm for size 20 x 20 cm size with water absorption of 3-6% confirming to IS 15622 -2006 of approved pattern PEI grade colour and shade, glazed or unglazed tiles for floors, treads of steps and landing laid on a bed of 12mm thick, CM 1:3 including pointing with white or colour cement, curing etc., as directed by the Engineer-in-charge complete. All labour and materials.

Providing special repairs to the ceiling of roof slab with anti corrosive coating Nito zinc Epoxy primer or equivalent to the exposed reinforcement 1 Kg/6 Sq.Mtr. and application of bonding agent nitobond EP or equivalent for bonding the existing cementitious surface at 1 Kg/2-3 Sq.Mtr and fillling the patches with polymer mortar Nitobond AR or equivalent mixed with CM 1:3 at 10 Ltrs/50 Kg. cement after that chemical curing with concure WB or equivalent @ 1 Ltr. to area of 5 Sq.Mtr. including necessary scaffolding cleaning the exposed reinforcement area etc., as required and as directed by the Engineer-in-Charge complete All labour and materials.

Plastering with CM 1:3, 20 mm thick including raking out joints, cleaning the surface, curing etc., including mixing water proofing compound pudlo or impermo 2% by weight of cement etc., as directed by the Engineer-in-charge complete. All labour and materials

Plastering with CM1:5 20 mm thick including raking out joints, cleaning the surface curing etc., as directed by the Engineer-in-charge complete. All Labour and Materials.

Plastering with CM 1:5 12 mm thick including raking out joints, cleaning the surface, curing etc., as directed by the Engineer-in-charge complete. All labour and materials.

Plastering with CM 1:3, 12 mm thick including raking out joints, cleaning the surface, curing etc., as directed by the Engineer-in-charge complete. All labour and materials.

Plastering with CM 1:4, 12 mm thick including raking out joints, cleaning the surface curing etc., as directed by the Enginner-in-charge complete. All labour and materials.

Plastering with CM 1:4, 20 mm thick including raking out joints, cleaning the surface curing etc., as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and fixing dressed double polished cuddapah slabs for cooking platforms and similar type of works etc., fixing with CM 1:3 including black oxide powder drilling holes as required etc. and as directed by the Engineer-in-charge complete. All labour and materials.

Painting priming coat to walls and ceiling surfaces with approved liquid cement primer including cleaning the surface scraping the surface and washing with soap water etc. as required and as directed by the Engineer-in-charge, complete. All labour and materials.

Painting one coat to walls, ceiling surfaces with approved plastic emulsion paint including cleaning the surface etc., as required as directed by the Engineer-in-charge, complete. All labour and materials.

Painting two coats to walls, ceiling surfaces, with approved plastic emulsion paint including cleaning the surface etc., as required and directed by the Engineer-in-charge, complete. All labour and materials.

Providing two coats of white cement based putty Birla or Jk equivalent quality of approved make to walls, ceiling surface etc., with putty blade or trowel including cleaning the surface scraping the surface with fine water proof emery paper after consecutive coats make the surface ready for painting etc., as required and as directed by the Engineer-in-charge, complete.All labour and materials.

Plastering with CM 1:3, 20 mm thick including raking out joints cleaning the surface, curing etc., complete. All labour and materials

Painting priming coat with white cement ACC or Birla or J.K. Brand or equivalent quality of approved make to walls, ceilings etc., including cleaning the surface, scraping the surface and washing with soap water including watering etc., complete. All labour and materials.

Providing painting two coats with weather coat smooth exterior paint or equivalent of approved quality, colour, and shade etc., on plastered / concerte suface including cleaning the surface, watering etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials.

supplying and fixing galvanized steel chain link mesh of 50mm x 50mm openings and 10 gauge as per IS 2721-1979 including bending tying with GI wire / welding etc., as required and as directed by the Engineer-in-charge complete. All labour and materials.

Painting with synthetic enamel paint of approved quality and shade white enamel paint including cleaning the surface and scraping the surface wherever required etc., as required and as directed by the Engineer-in-charge complete. All Labour and Materials.

a) One coat to new wood work

b) one coat to old Iron work

c) Two coats to new wood work

d) Two coats to new iron work

Painting priming coat with approved wood primer white on new wood work including cleaning the surface etc., as required and as directed by the Engineer-in-Charge complete. All labour and materials.

Snowcem or other equivalent quality water proof cement paint one coat of approved colour and shade to walls etc., on plastered and concrete surfaces including watering etc.,and as directed by the Engineer-in-charge complete. All labour and materials.

Snowcem or other equivalent quality water proof cement paint two coats of approved colour and shade to walls etc., on plastered and concrete surfaces including watering etc.,and as directed by the Engineer-in-charge complete. All labour and materials.

Scraping the old walls and removing the existing white wash or colour wash or distemper etc., and cleaning the surface as directed by theEngineer-in-charge complete.

Distempering with oil bound with approved brand (distemper of approved colour and shade) including cleaning the surface scraping the surface, washing with soap water etc., as required and as directed by the Engineer-in-charge complete. All labour and materials.

a) One Coat

b) two Coats

Varnishing one coat to wood work including cleaning the surface etc., as directed by the Engineer-in-charge, complete. All labour and materials.

Painting with synthetic enamel paint of approved colour and shade except white enamel paint including cleaning the surface and scraping the surface wherever required etc., as directed by the Engineer-in-charge complete. All labour and materials.

a) One coat to new wood work

b) Two coats to new wood work

c) One coat to old Wood Work

d) Two coats to new iron work

e)Two coats to old iron work

f) Two coats to old wood work.

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plasered concrete surfaces etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials

Distempering two coats with dry distemper with approved brand (distemper of approved colour and shade) including cleaning the surface etc., as required and as directed by the Engineer-in-charge, complete. All labour and materials

Supplying of river or gedda sand at site of work including stacking etc., as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and stacking of graded granite metal of size range 63 mm to 45 mm at site for road works including loading, unloading, transportation to site and stacking as directed by the Engineer-in-charge complete. All labour and materials.

Spreading sand or moorum or gravel or cinder in layers, compaction with hand roller and with rammers, watering etc., as directed by the Engineer-in-charge complete. All labour and materials but excluding cost of sand or moorum or gravel or cinder.

Dismantling and stacking RCC and/or steel fencing posts or struts within 50m lead including earthwork, refilling, dismantling of concrete etc., as required and as directed by the Engineer-in-charge, e, complete.

Dismantling lime or cement concrete and removing the debris within a lead of 50 m. and stacking the useful materials etc., as directed by the Engineer-in-charge complete.

Dismantling brick or stone masonry in lime (or) CM and stacking the useful materials within a lead of 50 m. and removing the debris etc., as directed by the Engineer-in-charge complete. All labour and materials.

Dismantling lime or cement plastering from walls and raking out joints up to 20 mm deep and cleaning the surface etc., including disposing the debris within a lead of 50 m. etc., as directed by the Engineer-in-charge complete.

Dismantling AC sheet or CGI sheet roofing and/ or walling including ridges etc., and stacking the useful materials and removing the debris within a lead of 50 mtrs etc., as directed by the Engineer-in-Charge complete.

Raggling of masonry or concrete surface etc. and dispose the debris within a lead of 50 m. etc. as directed by the Engineer-in-charge complete.

Removing old door with frames for repairs and refixing including dismantling masonry and making good the same etc., as directed by the Engineer-in-Charge complete. All labour and materials.

Removing old windows with frame for repairs and refixing including dismantling masonry and making good the same etc., as directed by the Engineer-in-Charge complete. All labour and materials.

Removing door or window shutters and stacking the released materials within a lead of 50 m. etc., as directed by the Engineer-in-charge complete.

Removing door or window shutters and refixing the same to the frames including hinges or screws etc., as directed by the Engineer-in-charge complete. (Measurement for existing height only)

Removing the existing wooden Jeffery and weld mesh jaffery including dismantling masonry portion and making good the masonry stacking at the place shown as directed by the Engineer-in-charge complete. All labour and materials.

Dismantling re-inforced cement concrete and removing the debris within a lead of 50 m including cutting reinforcement bars and stacking the useful materials including handing over the bars to Stores etc., as directed by the Engineer-in-charge complete

Cutting and open the masonry wall at the joints of outlet and other similar situations in all floors including closing the masonry as per original etc., as required and as directed by the Engineer-in-charge complete.

Providing surface drain including earth work excavation to required depth and constructing brick wall of size 100 mm x 150 mm (on either side of drains) plastering to walls with CM 1:4 12 mm thick including a layer of 25 mm thick benching concrete M-20, using 12 mm size graded granite metal over cement concrete 1:5:10, 100mm thick using 40 mm hard broken stone including refilling sides to original including rendering smooth etc., as directed by the Engineer-in-charge complete. All labour and materials.

Providing anti-termite treatment for existing buildings as per I.S. 6313 pt. III -1981 latest edition, using chemical emulsion chlorpyrifos 1% concentration by weight for soil treatment at foundation and under floors, walls, wood work etc., including drilling holes, pumping and sealing etc., as directed by the Engineer-in-Charge complete. All labour and materials

Transportation of debris/excavated earth etc., upto lead of 4 km. including loading and unloading stacking and levelling the unloaded materials by mechanical means as required including all leads and lifts etc. and as directed by the Engineer-in-charge complete

Transportation of debris / excavated earth up to a lead of 10 km. including stacking loading, unloading and leveling the unloading materials by mechanical means at the place shown etc., as directed by the Engineer-in-charge complete.

Supplying and fixing approved superior variety curtain cloth of polyster cotton including stiching charges with approved lining cloth of polyster material by providing 2 pleates and folding 5 cms at top,15cm at bottom, 2.50cm on both sides including ring,tape and plastic rings etc., as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and fixing ball valve of approved quality as per IS 1703 as required including polyethylene float etc., as directed by the Engineer-in-charge complete. All labour and materials.

a) 15 mm nominal size.

b) 20mm nominal size.

Supplying PVC taps of approved make and quality at site of work etc., as directed by the Engineer-in-charge complete. All labour and materials.

a) 15mm dia

b) 20mm dia

Supplying and laying unplasticized PVC (polyvinyl chloride) pipes for potable water supplies as per IS4985 schedule in plumbing work including cutting the pipes, threading, clamps etc. fixing specials such as bends, tees, sockets, unions, reducers etc., as required including making good the cuttings such as floors, walls etc, as per original and as directed by the Engineer-in-Charge complete. All labour and materials.

a) 20mm outside dia

b) 25mm outside dia

c) 32 mm outside dia

d) 50mm outside dia

Supplying and laying PVC soil waste and rain water pipes as per IS 13592-1992 and fittings or specials including cutting the pipes, chamfer the pipe ends, cost of solvent/cement/lubricant, jointing, fixing pipe clips, leak proof testing etc., including cutting masonry/ concrete as required at floors and walls etc., and making good the same as per original etc., as directed by the Engineer-in-Charge complete. All labour and materials

75 mm dia TYPE -A IS:13592:1992

75 mm dia TYPE -B IS:13592:1992

110 mm dia TYPE - A pipes IS:13592:1992

110 mm dia TYPE - B pipes IS:13592:1992

Supplying CP brass pillar cock 15 mm dia with check nuts for wash hand basin etc., at site of work etc., as directed by Engineer-in-charge complete. All labour and materials.

Providing and fixing medium grade GI Pipes and specials (as per IS 1239) including cutting the pipes threading etc., and fixing specials such as bends, tees, sockets, unions, reducers etc. by lead wool clamps etc., wherever necessary including fixing in house plumbing system and making good the cuttings as per original etc., as directed by the Engineer-in-charge complete.All labour and materials.

a) 15 mm dia

b) 20 mm dia

c) 25 mm dia

d) 40 mm dia

e) 50 mm dia

Supplying gun metal wheel valve half way with socket ends of approved make at site of work etc., as directed by the Engineer-in-Charge complete. All labour and materials.

a) 15 mm dia

Supplying and fixing vitreous wash basin of approved make single 15 mm CP Brass pillar Tap, 15mm CP Brass stop valve CP brass chain and rubber plug, 32 mm CP Brass Waste fittings, 32 mm PVC waste pipe painted CI brackets etc., including cutting and making good the walls etc., as directed by the Engineer-in-charge complete. All labour and materials.

a) Flat back 630 x 450 mm white

b) flat back 550 x 400 mm white

Supplying and fixing 600 x 450 mm bevelled or rounded edge mirror 5 mm thick of superior glass with 6 mm thick Asbestos Sheet at rear, fixing wooden cleats, CP Brass screws and washers etc., as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and fixing white vitreous wash down water closet (European type confirming to IS 2556 Pt.II with P or S trap Plastic seat and cover CP Brass hinges and rubber buffers including cutting and making good the walls and floors etc., as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and fixing 10 Ltrs. plastic flushing cistern confirming to IS 7231 for European water closets including fittings CP flush pipe 15 mm CP Brass stop valve etc., cutting and making good the walls and floors etc., as directed by the Engineer-in-charge complete. All Labour and Materials.

Supplying and fixing cuddaph sink of size 600 x 450 x 350 mm including necessary PVC 32 mm dia pipe outlet CP brass waste pipe including cutting and making good the walls and floors etc., as directed by the Engineer-in-charge complete. All Labour and materials..

Supplying and fixing aluminium towel rail 750 mm x 18 mm with aluminium brackets fixing to wooden cleats, CP Brass screws etc., as directed by the Engineer-in-charge complete. All labour and materials

Supplying and fixing Aluminium towel rail 600 MM X 18 MM with Aluminium brackets , fixing wooden cleats C.Pbrass screws etc., as directed by the Engineer-in-charge complete. All Labour and Materials.

Supplying and fixing PVC waste pipe at site of work etc., complete as directed by the Engineer-in-charge complete. All Labour and Materials.

(a) 32 mm dia

(b) 40 mm dia

Supplying Indian make water closet 580 mm size without flushing arrangements with P or S trap two foot rests of approved make at site of work as directed by the Engineer-in-charge complete. All Labour and Materials.

Supplying and fixing vitreous water closet squatting Pan (Indian type) of approved make confirming to IS 2556 (Pt.III) with P or S trap including cutting and making good the walls and floors etc., as directed by the Engineer-in-Charge complete. All labour and materials.

a) orissa pattern 580 x 440 mm white

b) orissa pattern 580 x 440 mm colour

Supplying and fixing white ware vitreous wash down water closet (European type) confirming to IS 2556 (Pt.II) “P” or “S” trap plastic seat and cover, CP Brass hinges and rubber buffers, 10 ltrs. Low level vitreous flushing cistern, confirming to IS 774 with fittings, CP flush pipes 15 mm CP brass stop valve etc., including cutting and making good the walls and floors etc., as directed by the Engineer-in-Charge complete. All labour and materials.

Desiltation of drains including removing silt slushes, pebbles, garbage iron ore iron ore fines etc., including removing the sand from under water if existing within a lead of 10 m. and lift of 2 m. and transportation of the same after drying upto ½KM and Levelling the same etc., as directed by the Engineer-in-charge complete.

Supplying and fixing vitreous white flat back or angle back lipped front bowl type urinal conforming to IS2556 (Pt.VI Sec.I) of approved make including fixing wooden plugs, screws 32 mm PVC Waste pipe etc., cutting and making good the walls etc., as directed by the Engineer-in-charge complete. All Labour and Materials.

Providing scaffolding including ballies, cost of ropes, nails and all lifts etc., as directed by the Engineer-in-charge complete. All labour and materials.

(a) From 3Mtrs. to 6 Mtrs. High (First Floor)

(b) From 6 Mtrs. To 9 Mtrs. High (Second Floor)

(c ) From 9 Mtrs to 12.00 Mtrs. (Third Floor)

(d) From 12.00 Mtrs. To 15.00 Mtrs. (Fourth Floor)

Supply of Brass Sitting (to suit 15 mm Brass bib cocks) at site of work etc as directed by the Engineer-in-charge complete All Labour and Materials.

Supply of the Gun metal gate valve (as per IS 778) of 20mm dia at site of work etc., as directed by the Engineer-in-charge complete. All labour and materials

Supplying chromium plated brass angle cocks 15 mm dia of approved make etc. as directed by the Engineering-Incharge complete. All labour and materials.

Supplying chromium plated brass waste couplings 32 mm. dia at site of work etc. as directed by the Engineering-In-charge complete. All labour and materials.

Cleaning and washing of water tanks including scraping stickey materials and cleaning with bleaching powder, removing wash out dummy and refixing after cleaning including painting the date of cleaning and due date of cleaning on the tank surface etc., as directed by the Engineer-in-charge complete Including cost of bleaching powder and paint.

(a) Ground Tank

(b) For tanks/masonry/ RCC/PVC / Steel on the roof slab of residential and non residential buildings.

(c ) For Overhead RCC or Steel or P.V.C. Tanks up to 15 m. high

Supply of 40/32 mm dia PVC Waste Pipe (flexible 75 cm. Long) for wash hand basins/sinks at site of work etc., as directed by the Engineer-in-Charge complete. All labour and materials.

Supply of 15 mm dia PVC Pipe connection (for wash hand basin) 60 cm. Long with check nut and washers at both ends at site of work etc., as directed by the Engineer-in-Charge complete. All labour and materials.

Supplying 20 mm dia PVC Flexible Hose pipe of approved make at site of work etc., as directed by the Engineer-in-Charge complete. All labour and materials.

Laying of PVC soil waste and rain water pipes of dia 110/75 mm and fittings or specials including cutting the pipes chamfer the pipe ends, cost of solvent cement, lubricant, jointing, fixing pipe clips, leak proof testing etc., including cutting masonry/concrete as required at floors and walls etc. and making good the cutting as per original etc., as directed by the Engineer-in-charge complete. All Labour and Materials. but excluding cost of PVC Pipes and fittings or specials

Supplying and fixing Sintex, Nandi or equivalent product PVC frame work for doors etc., made out of multi chamber hollow PVC Section (40 x 57mm) with EPDM Gasket and GI reinforcement. The corners shall be made metre cut and welded or joined with necessary fixtures etc. as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and fixing Sintex or Nandi or equivalent PVC door shutters single leaf comprising styles and rails made of Sintex or Nandi or equivalent PVC Section (58 x 23 mm) and panel in fill comprising of Sintex, Nandi or equivalent product multi chamber hollow PVC Section (200 mm x 20 mm x 1 mm) with dovetail locking arrangements with necessary anodised aluminium fittings etc., as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and transporting of treated drinking water in Lorry /tanker including tank hire charges, waiting charges, hose pipe, fuel, oil, wages of staff and taxes if any for all the equipment and charges etc., as directed by theEngineer-in-charge complete. All Labour and Materials. .

Supply of Motor Truck for the transportation of all sorts of materials such as sand, gravel, metal, steel, cement, boulders, debris, furniture, water supply pumps and motors including fuel charges, driver charges etc., as directed by the Engineer-in-charge complete. (payment will be made for number of hours worked at site only)

Supply of 4mm. Thick tinted glass at site of work including transportation etc., as required and as directed by the Engineer-in-charge complete. All labour and materials.

Fixing tinted glass 4 mm / 5 mm for aluminium windows and door frames with necessary rubber beading, glazing clips as required including cost of rubber beading, glazing clips, as required and as directed by the Engineer-in-charge complete. All labour and materials but excluding cost of glass - ground floor.

Supplying and providing AC Gasket of approved quality and make to the existing aluminium glazed doors alround including removing the existing door shutter and refixing the same in position as per original after providing AC gasket on all four sides of the shutters all tools and plants as required and as directed by the Engineer-in-charge complete. All Labour and materials.

Supply and fixing ISI aluminium 100mm long hinges with screws and necessary wood pieces etc., at site of work as directed by the Engineer-in-charge complete. All labour and materials.

Supplying and fixing double trappattern white vitreous syphonic wash down water closet (european type) conforming to I.S. 2556 (part -viii) 'P' or "S" trap plastic seat and cover, C.P. Brass hinges and rubber buffers 10 litres low level vitreous flushing cistern with fittings, 15mm C.P. brass stop valve etc., cutting and making good the walls and floors complete. All labour and materials.

Supplying and fixing plastic flushing cistern conforming to I.S. for water closets 10 litres capacity (with adjustable capacity of water from 5 to 10 litres) including fittings, flush pipe. Inlet pipe overflow pipe mosquito-proof, handle or knob etc., C.P. brass stop valve 15mm size cutting and making good the walls and floors complete all labour and materials.

Providing and fixing medium grade GI pipes and specials (as per IS 1239) including cutting the pipes threading etc. and fixing specials such as bends, tees, sockets, unions, reducers etc., by lead wool etc. wherever necessary including earth work excavation of trenches to required depth and refilling after laying etc. and making good as per original as directed by the Engineer-in-Charge complete. All labour and materials.

a) 50 mm dia

b) 40 mm dia

c) 20 mm dia

d) 15 mm dia

e) 25 mm dia

Supplying and fixing PVC cover for PVC water tanks with necessary PVC hinges, locking arrangements for all size of tanks etc., as directed by the Engineer-in-complete. All labour and materials.

Writing sign board on walls and concrete surface by scraping the existing surface finishing with approved colour synthetic enamel paint writing letter of size 150 to 350 mm etc., as directed by the Engineer-in-Charge complete. All Labour and Materials.

Acid cleaning of floors, dadoos by application of cleaning acid with sponge and cleaning with water jet including removing stubborn stains by scraping and applying white/ coloured cement grout wherever necessary complete as directed by the Engineer-in-charge. All Labour and Materials.

Supplying the following materials of approved quality and make at site of work etc., as directed by the Engineer-in-charge. All Labour and Materials.

(a) Commercial Plywood 12 mm thick

(b) Teak Ply 3 mm Thick

(c ) Teak Ply 6 mm Thick

(d) Sunmica for wood work

Supplying and fixing 3 mm thick commercial plywood board of required size and shape with approved glues, nails, screws etc., as directed by the Engineer-in-charge complete. All Labour and Materials. but excluding frame work

Supplying of nylon fly proof mesh of approved quality and colour etc., at site of work as directed by the Engineer-in-charge complete. All Labour and Materials.

Desiltation of septic tank using automatic vacuum loader including removing sludge, sewage water and lifting and placing the existing manhole cover (precast slabs) including transportation of removed material in a closed container within a lead of 15 kms. and disposing the same at VMC sewage area or any other sewage areas as directed by the EIC including excavation of sludge pits and leveling the same etc., complete. All Labour and Materials.

Lifting and removing the RCC precast slabs of various sizes over the drains, subways, cable ducts, man holes etc., carefully and replacing the same in position wherever required without causing damage to the slabs, drains sub ways, cable ducts and man holes etc., as directed by the Engineer-in-charge complete, with all labour and tools etc.,

Supplying and fixing polyethylene water storage tank conforming to IS 12701 rotational moulded cylindrical vertical type including top cover with locking provision, necessary GI fittings for inlet, outlet, over flow and washout including lifting, hoisting in position, fixing etc., as directed by the Engineer-in-charge complete. All Labour and Materials.

(a) 500 ltrs. Capacity. Tank

(b) 1000 Ltrs. Capacity tank

c) 2000 Litres capacity tank.

Supply of JCB(3D) earth mover for excavation levelling and removing debris/earth etc., as directed by the Engineer-in-charge including fuel, operator charges and incidental charges etc., as directed by the Engineer-in-charge complete. All Labour and equipment, spares etc., complete. (payment will be made for number of hours worked at site only)

Supplying of EX-60 Excavator at site of work for excavation/levelling and removing debris etc., as directed by the Engineer-in-Charge with fuel, operator charges, incidental charges, hire charges and transprorting the equipment to the site of work. All labour, equipment, fuel & spares etc., complete. (payment will be made for No. of hours worked at site only)

Supply of EWC seat and cover PVC with rubber washers etc., as per IS 2548 as required at site of work etc. as directed by the Engineer in charge complete. All Labour and Materials.

Supply of PVC flushing handles to PVC flushing tanks of required size and shape at site of work etc., as directed by the Engineer in charge complete. All Labour and Materials.

Supply of Float valves for PVC flush tanks at site of work etc., as directed by the Engineer in charge complete. All Labour and Materials.

Supply of cement(PortLand Slag) packed in HDPE bags each 50 Kgs. of approved brand at site of work including transportation etc., as directed by the Engineer-in-Charge complete. All labour and materials.

Add cess @ 1%

P Govinda Reddy Infrastructure (BID ID -823723)