Construction of ESR in Zone-7 and 8 with other ancillary work in Koraput Municipality under State Plan, D.No.13-4215 SUJALA for the Year 2025-26

Construction ESR with piping arrangement near OGR (Hill top) Tikira Sahi, Koraput (8.00 lakh liter capacity)

Design, Supply, Construction, Testing & Commisioning of 8.00 lakh ltr capacity with 25mtr high staging RCC ESR and piping arrangement up to 5 Mtr from external face etc. all complete as per the direction of Engineer-in-charge.

Supplying all labour and T&P for laying trenches M.S. pipe of following dia for tapping of water from OGR & ligfting to ESR as per specification & direction of Engineer-in-charges. (including painting)

250mm dia M.S.pipe (6.3mm thickness)

Supplying all materials,labour and T&P for fabrication of 600mm dia common header and inlet and Exit 250mm dia MS pipe 12mm wall thickness as per specification and direction of E.I.C - 2nos

Supplying all labour and T&P for laying trenches M.S. pipe of following dia for tapping of water from OGR & ligting to ESR (Bottom) as per specification & direction of Engineer-in-charges. (including painting)

600mm dia M.S.pipe (12.5mm thickness)

250mm dia M.S.pipe (6.3mm thickness)

Supplying all materials,labour and T&P such as welding machine,Oxyacetelen gas set and other consumables for fabricating following M.S.specials including welding charges as per direction of Engineer- in- charge etc all complete

600mm.dia. M.S.flange (20mm thick)

250mm.dia. M.S.flange (12mm thick)

Supplying all materials,labour,T&P for cutting of M.S Plate/Pipe line work upto 6mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete.

Supplying all materials,labour and T&P such as welding machine,Oxyacetelen gas set and other consumables for fabricating following M.S.specials including welding charges as per direction of Engineer- in- charge etc all complete

250mm.dia. M.S.flange

250mm.dia. M.S Offset bend (Plain)

Supplying all materials, labour and T&P for fixing of following size sluice valve , N.R valve & Air valve with double flanged end for water Work propose for the following rating and nominal diameter Including testing of joints as per specification & direction of Engineer-in-charge

250mm dia N.R. Valve (Labour charges)

Cost of 250mm dia C.I. N.R. Valve (P.N.1.6) of Kirloskar / Vag/ Audco or equivalent make , Double flanged swing type non return valves IS: 5312, Part -I, Flanged ends

Construction of brick masonry Sluice valve / Flow meter / control valve / PT etc. chamber as per P.H. design and specfication etc. all complete including covering the chamber with MS shutter with required MS febrication work with required size of MS angle / flate (Size 1.35 x 1.35 x 1.20) - 5nos

Earth work in all kinds of soil

Cement concrete (1:4:8) with 4cm size hard granite metal.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth (23cm x 11cm x 8 cm)

12mm. thick C.P. in cement mortar (1:3) for brick work.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge.

Fabricating, Supplying and fixing iron shutter with iron choukat made out of 35mm x 35mm x 5mm M.S. angle, 25mm x 6mm M.S. flat, and 18 guage M.S sheet fitted with aldrop, door handle, tower bolt etc complet.

Supplying all materials,labour,T&P for cutting of M.S Plate/Pipe line work upto 6mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete.

Desing & Supplying all materials, labour T&P for Supplying all materials, labour, T&P for construction of 6.00 x 3.50m internal dimension for PLC & Control penel near OGR (Hill top) Tikira Sahi, Koraput iet complete as per direction of EIC. Including floor tile, wall tile, W/s & S/I system and internal electrification.

supplying, installation, testing, commission of 50 HP Centrifugal pump set having head 36mtr and discharges 70 Lps of reputed make as per specification and direction of E.I.C (2.nos x 50HP) of Kirloskar, Crompton, KSB, Wilo, Havells, Lubi make

supplying and laying of copper Armoured cable / Aluminium Armoured cable of following size as per specification and direction of EIC of Polycab India, Havells India, Finolex Cables, KEI Industries make

35sqmm 3.5core LT copper Armoured cable

35sqmm 3.5core LT Aluminium Armoured cable

Supplying all materials, labour, t&p and fixing of PLC Compatable ATV930- , HEAVY DUTY 145 AMP,WITH BREAKING UNIT VFD floor mounted Control Panel made out of 2MM C.R Powder coated sheet & alluminium BusBar interconnected with copper wire and lugsh having 50KA -125A MCCB including spreader link and extended ROM-1No, RYB indicator -1set, digital ammeter- 1 No, digital volt meter- 1No, 4A control sutaible for existing pump motor 50HP/37KW VFD

Supplying, installation, testing, commission of of 100 KVA 3 Phase Transformer 11/.4 KVA with Sub Station as per specification and direction of E.I.C of Siemens, ABB, and Kirloskar Electric make

Layiing of 11 KV line with 160 x 160mm G.I pole

Procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and

painting at manufacturer’s works, packing, supply, unloading /transportation/ handling/storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity (Prime Power) Silent DG sets along with AMF Panels, Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required),instrumentation, all Auxiliaries, Exhaust system & silencer, Fuel Tank, Fuel piping , cable of required size, 2 nos earthing for DG set, required foundation, good quality(L& T or equivalent) , change over,meetering panel, with CT Meter, all complete etc. with inspection certificate from electrical inspector and as as per site condition including construction of RCC foundation and & DG set shed (Framed sheet roof) etc. conforming to CPCBIV+ & direction of E.I.C

82.50 KVA alternator Liquid Cooled with standard panel, Acoustic enclosure & Base frame with AMF panel (external IP-42 Floor mounted panel) outside conopy (Make Kirloskar / Jackson / Mahindra / Sterling)

Main busbar with Distribution busbar with required electrical accessory i.e 200Amp MCCB, internal wire, Volt meter, Ampere Meter, indicator lamp with required size of powder coated enclosure etc. all complete as per specification and direction of E.I.C.

Laying of Distribution pipe line and other ancillary work

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Cutting of B.T / C.C. road for taking C.I. pipes through

C.C road cutting

B.T road cutting

Supplying all labour and T&P for laying trenches certifugally cast spum (Iron) pressure pipe Class-B confirming to I.S.1536 of different dia as per specification & direction of Engineer-in-charges.

250mm dia D.I.pipe (K7)

200mm dia D.I.pipe (K7)

150mm dia D.I.pipe (K7)

100mm dia D.I.pipe (K7)

Supplying all labour and T&P for filling the trenches with excavated earth in layers and compacting etc. as per direction of the Engineer-in-charges.

Supplying all material, labour, T&P for laying in trenches D.I specials of the following diameter as per P.H. specification including carriage of materials from store to work site complete. as per the direction of Engineer- in- charge

Supplying all material labour and T&P for making of tyton joints using rubber rings of the following nominal diameter including testing of joints including cost of rubber rings as per P.H. design and specification as per the direction of Engg-In-Charge (Excluding cost of gasket)

DI – 250 mm dia

DI – 200 mm dia

DI – 150 mm dia

DI – 100 mm dia

Supplying all materials, labour and T&P for fixing of following size sluice valve , N.R valve & Air valve with double flanged end for water Work propose for the following rating and nominal diameter Including testing of joints as per specification & direction of Engineer-in-charge

Supplying all labour and T&P for conveyance of surplus earth to the out skirt of town (within 5.Km) by mechanical means

250mm dia N.R. Valve

250mm dia Sluice Valve

200mm dia Sluice Valve

150mm dia Sluice Valve

100mm dia Sluice Valve

250mm dia Pressure Reducing valve (PRV)

200mm dia Pressure Reducing valve (PRV)

150mm dia Pressure Reducing valve (PRV)

100mm dia Pressure Reducing valve (PRV)

250mm dia flow control valve

200mm dia flow control valve

150mm dia flow control valve

Cost of 250mm dia N.R. Valve (P.N.1.6) 250mm dia C.I. N.R. Valve (P.N.1.6) of Kirloskar / Vag/ Audco or equivalent make

Cost of 250mm dia D.I. Resilieng Seated Gland less Sluice Valve (P.N.1.6)

Cost of 200mm dia D.I. Resilieng Seated Gland less Sluice Valve (P.N.1.6)

Cost of 150mm dia D.I. Resilieng Seated Gland less Sluice Valve (P.N.1.6)

Cost of 100mm dia D.I. Resilieng Seated Gland less Sluice Valve (P.N.1.6)

Cost of 250mm dia Pressure Reducing valve (PRV)

Cost of 200mm dia Pressure Reducing valve (PRV)

Cost of 150mm dia Pressure Reducing valve (PRV)

Cost of 100mm dia Pressure Reducing valve (PRV)

Cost of 250mm dia flow control valve (FCV)

Cost of 200mm dia flow control valve (FCV)

Cost of 150mm dia flow control valve (FCV)

Earth work in all kinds of soil

Cement concrete (1:4:8) with 4cm size hard granite metal.

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth (23cm x 11cm x 8 cm)

12mm. thick C.P. in cement mortar (1:3) for brick work.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge.

Fabricating, Supplying and fixing iron shutter with iron choukat made out of 35mm x 35mm x 5mm M.S. angle, 25mm x 6mm M.S. flat, and 18 guage M.S sheet fitted with aldrop, door handle, tower bolt etc complet.

Construction of brick masonry Sluice valve / Flow meter / control valve / PT etc. chamber as per P.H. design and specfication etc. all complete including covering the chamber with MS shutter with required MS febrication work with required size of MS angle / flate - size [1.35x1.35x1.20mtr] (8.nos)

Supplying all labour and T&P for laying trenches M.S. pipe of following dia for tapping of water from OGR & ligting to ESR (Bottom) as per specification & direction of Engineer-in-charges. (including painting)

Supplying all materials,labour and T&P for fabrication of 600mm dia common header and inlet and Exit 250mm dia MS pipe 12mm wall thickness as per specification and direction of E.I.C

600mm dia M.S.pipe (12.5mm thickness)

Supplying all materials,labour and T&P such as welding machine,Oxyacetelen gas set and other consumables for fabricating following M.S.specials including welding charges as per direction of Engineer- in- charge etc all complete

250mm dia M.S.pipe (6.3mm thickness)

600mm.dia. M.S.flange (20mm thich)

Supplying all materials,labour,T&P for cutting of M.S Plate/Pipe line work upto 6mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete.

Supplying all labour and T&P for laying trenches M.S. pipe of following dia for tapping of water from OGR & ligting to ESR (Bottom) as per specification & direction of Engineer-in-charges. (including painting)

600mm dia M.S.pipe (12.5mm thickness)

250mm.dia. M.S.flange (12mm thich)

200mm dia M.S.pipe (6.30mm thickness)

150mm dia M.S.pipe (4.50mm thickness)

Supplying all materials,labour and T&P such as welding machine,Oxyacetelen gas set and other consumables for fabricating following M.S.specials including welding charges as per direction of Engineer- in- charge etc all complete

100mm dia M.S.pipe (4.00mm thickness)

250mm.dia. M.S.flange (12mm thick)

200mm.dia. M.S.flange (12mm thick)

150mm.dia. M.S.flange (10mm thick)

250mm.dia. M.S Offset bend (Plain)

100mm.dia. M.S.flange (10mm thick)

200mm.dia. M.S Offset bend (Plain)

150mm.dia. M.S Offset bend (Plain)

100mm.dia. M.S Offset bend (Plain)

Supplying all materials,labour and T&P and making flanged joints for MS pipes and specials of the following diameter including testing of joints as per specification all complete

100mm.dia flanged joint

150mm.dia flanged joint

200mm.dia flanged joint

Supplying all materials,labour,T&P for cutting of M.S Plate/Pipe line work upto 6mm thick with cost of oxygen & acetelene gas transporation charges of all machineries etc all complete.

Supplying all materials,labour,T&P for butt or fillet welding to the M.S mambers at site by using welding machine & generator with transportation charges of machineries & cost of approved electrodes etc all complete.

250mm.dia flanged joint

Supplying all materials, labour and T&P for connection of existing rising line and distribution line including cutting existing line as per specification and direction of E.I.C

Making inter-connection for 100mm.dia pipe line

Making inter-connection for 150mm.dia pipe line

Making inter-connection for 200mm.dia pipe line

Making inter-connection for 250mm.dia pipe line

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (6.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Cement concrete (1:3:6) with 4cm size hard granite metal

M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. (Base)

Trangular portion (Bottom)

Filling foundation and plinth with excavated materials(in all kinds of soil)

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (6.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Cement concrete (1:3:6) with 4cm size hard granite metal

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Supplying all materials,labour and T&P for construction of RCC thrust block as per specification and direction of E.I.C (6.nos)

Dry stone masonry or rough stone dry masonary with granite

Supplying all materials,labour and T&P for construction of retaining wall / Guard wall for Raw water rising main for a length of 100.00m as per specification and direction of E.I.C

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (6.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

R.C.C. Retaining wall (15.mtr)

Cement concrete (1:3:6) with 4cm size hard granite metal

Cement concrete (1:1½:3) for R.C.C. works with 12mm size hard granite chip

s including hoisting and laying.

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (6.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Providing 50mm dia PVC pipe for weep holes as per direction of E.I.C

R.R. Retaining wall (10.00 mtr length)

Cement concrete (1:4:8) with 4cm size hard granite metal

Random rubble stone masonry in cement mortar (1:6) in foundation and plinth

2.5cm. Dam proof course with C.C (1:2:4) using 12mm. size hard broken granite chips

20mm. thick cement plaster (1:6) for stone work

DI – 100 mm dia

Supplying all materials,labour and T&P for Dismantling of old RR masonary tank by mechanical means and conveyance of debries as per specification and direction of E.I.C

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (6.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Cement concrete (1:3:6) with 4cm size hard granite metal

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead

Supplying all materials,labour and T&P for New Construction of C.C. Drain at DNK pump house, Koraput as per specification and direction of E.I.C (15.00 mtr length)

Supplying all materials,labour and T&P for construction of RCC pillar for holding of pipe line as per specification and direction of E.I.C (6.nos)

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Filling foundation and plinth with sand watered and rammed.

Cement concrete (1:2:4) for R.C.C. works with 12mm size hard granite chips including hoisting and laying.

Cement concrete (1:3:6) with 4cm size hard granite metal

Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor.

12mm. thick cement plaster (1:4) on brick with Punning

Supplying all materials,labour and T&P for Construction of C.C. Road at DNK pump house, Koraput as per specification and direction of E.I.C (15.00 mtr length)

Expansion joints (Thermocol board) as per specification and direction of E.I.C

Supplying all materials,labour and T&P for Laying of paver block in different location in Zone- 7 & 8, Koraput as per specification and direction of E.I.C (Detail estimate attached Annexure-K)

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead

Providing Supplying, fitting and fixing of 80mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge.

Shifting House connection

Supplying all labour and T&P for fixing ferrule of the following nominal bore including drilling the water main (cast iron or pipes with metal straps )as per specification all complete

15mm dia brass ferrule

3/4" dia HDPE pipe

1" dia HDPE pipe

Provision for Extranal & Internal power supply

Cost of materials.

Cost of 250mm dia C.I mechanical joint socket

Cost of 250mm dia C.I mechanical joint Collar

Cost of 200mm dia C.I mechanical joint socket

Cost of 200mm dia C.I mechanical joint Collar

Cost of 150mm dia C.I mechanical joint socket

Cost of 150mm dia C.I mechanical joint Collar

Cost of 100mm dia C.I mechanical joint socket

Cost of 100mm dia C.I mechanical joint Collar

Cost of C.I. specials

PLC-SCDA I&C system near OGR (Hill top) Tikira Sahi, Koraput

Level Transmitter - Designing, Supplying, installing,commissioning & testing of Ultrasonic level transmitter CE marked at each filter bed with following technical parameters Interfacing with PLC panel including mounting arrangement. Range - 0.5 mtr Output - 4.20 mA/HART Power supply - 24V DC ext. Display - 4" LED Accuracy - +/1 0.25% of full scale or batter Enclosure - IP 68

Supply, installation and commissioning of LT surge arrester having 5KA capacity with spike and all accessories including cost of all materials, labour, T&P etc all complete.

Pressure transmitter - Desgning, supply, installation, commissioning , testing of pressure transmitter CE marked with following techical parameter at Clear water pump house and interfacing with PLC panel including mounting arrangement along with snubber and needle valve 1.0sqmm 2 core copper braidder screen cable wire, screw, grip & clamp for DI / MS pipe fittings Output - 4.20mA/HART Power supply - 24V DC ext. Display - 4" LED Accurcy - +/- 0.1% of full scaleor better Encloser - IP 68

Pressure Gauges: Provision of Glycerine filled pressure gouge with fittings & isolation ball valve with socket including cost of all materials, Transporation to site etc, all complete all labour, T&P etc. All complete as per the direction of E.I.C

Full-Bore Electromagnetic Flow Meter - Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100 mm1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25mtrs built in GSM/GPRS ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications.

250mm dia Electromagnetic flow meter

200mm dia Electromagnetic flow meter

150mm dia Electromagnetic flow meter

UPS - Supply, installation and commissioning of single phase 1 KVA online UPS with pure sine wave & float cum boost charging with battery rack and maintenance fee battery system including cable power plug, switch having application in 24V lot DC battery (Drytype) charging to output continuous 3 hrs power backup all complete work (WTP-1 & MCC ROOM-1 Distribution-6)

GSM/GPRS modem - Supplying , Installing and Commissioning of SMS based ON / OFF

operation of pumps at remote locations with test & trial including one year guaranty & two year comprehensive maintenance including SIM card & SMS charges. Wireless Motor Controller is suitable for all range of electrical motors and starters and pump sets. It shall protect pump set from dry run. Controller shall have inbuilt battery and charges automatically. Controller shall be controlled through SMS, Call, IVRS or Smart Phone application (All controlling modes are must). It shall have following features as, a. Auto Mode operation – Pump

Instrumentation, control and power XLPE cables along with the cable tray, glands, lugs and other accessories for interfacing the instruments at remote station with the RTU as per the technical specifications of Power Cable

Power Cable -ditto-4 core 4 mm2 copper cable

Control Cables-ditto- 3 core 1.5 mm2 copper cable

Control Cables-ditto- 6 core 1.0 mm2 copper cable

Control Cables-ditto- -20 core 1.0 mm2 copper cable

Instrument Cable- ditto- 2 Pair 1.0 mm2 cable

OFC: Supply and Laying of 12 core unarmoured Optical fibre cable ( OFC. Fiber glass with F-G 62.5/125micron, 2.6DB/KMF600) to various sites through HDPE pipe /in Air ( pole to pole ), prelaying testing of each cable drum for each fibre and tahing the OTDR traces,submission of OTDR traces (in hard as well as soft copy) to Engineer-in-charge/Site Engineer.

HDPE PIPE: Supply and Laying of 40MM(8Kg/cm2)dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.(excluding earth work)

Supply, installation, of online chlorine turbidity & PH analyser with following technical specification (ABB/E & H/Forbes marshall) a) Chlonne sensor, b) Battary 4x19AN, c) 5 Micron Cartridge filter, d) 4G Modem with GSM/Ethernel/Fibre output, e) FRP/Stainless Enclosure, f) Flow cell for chlonne & Turbidity Sensor, g) Turbidity sensor with RS 485 Modbus output, h) PH sensor, i) controller 4 channel

Supplying, installation & commissioning of stainless steel ESE lightning arrester, single phase, radius coverage area 47m GI mast height 3m NFC17-102 & CPRI approved. All complete as per electrical specification and as per direction of EIC supply termination of 70sqmm x 1 core multi strand copper cable including all materials accessories and labour charges complete in all respects as per site requirements and direction of the Enginner in charge. Supply of chemical earthing with crystaline conducting materials for back fill compound & installation of maintenance fees earthing Electro with ISI mark CU/GI pipe dia 50mm2 meter long, Ground filling compound will be provided in 25kg per bag-2nos etc. all completed as per the site requirement.