Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC ARIHANT 15 A GOKUL SOCIETY SINDHWAL MATA ROAD PRATAPNAGAR VADODARA 390 004 | VADODARA | GUJARAT | 390004 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹20.4 L+₹46,299.63 (2.32%)Rejected-AOC SHAMAL BECHAR S CHAWL SIDHANATH ROAD B H KHANDERAO MARKET VADODARA 390 001 GUJARAT | VADODARA | VADODARA | GUJARAT | 390001 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹20.5 L+₹58,501.13 (2.93%)Rejected-AOC | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹20.6 L+₹60,260.73 (3.02%)Rejected-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L4 | Rejected-AOC Being not L1 |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
2 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sachin Singhal EE GE Army Baroda
Opp Akashwani, Makarpura road PO-ONGC Baroda-390009
As per BOQ
2022_MES_561457_1
8699
Open Tender
Civil Works
Item Rate
180 days
GE Army Baroda
As per tender documents
5 documents required · 5 mandatory
₹500
Yes
GE Army Baroda
₹40,000
Yes
9 Jan 2023
4 Nov 2022
8 Dec 2022
4 Nov 2022
2 Dec 2022
18 Nov 2022
5 Nov 2022 - 17 Nov 2022
Amount
Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each
S&F Pressed steel frames for doors with one or more rebates of size 125X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; complete,as specified.
S&F Hand rail, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F in repairs 25mm dia stainless steel SS 202 tubular curtain rod including fancy type sockets, stop, rollee etc complete all as specified and directed.
Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc. 1.5 Sqm each
M&L for 18-20mm thick green marble in one piece machine cut as in Door frame, window cills and like, in cement mortor (1:4) set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to make door frame with marble shade, laid over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified.
Rounding to edges of stone slabs such as Door frame and other similar situations complete all as specified
S & F powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per the directions of Engineer-in-charge.
M & L for 4mm thick sheet glass, ordinary quality and glazing with rubber beading or with glazing clips, all as specified and directed.
S&F for Framed work as in doors, windows or gates or grill/grating of angle or other section with gusset plates, rails, braces, etc., complete, drolled for fixing of steel sheeting or other covering. Doors/Windows, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete.
M&L for preparation of new steel or iron surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified
Taking down shutters of any description exc. 2 Sqm each complete all as specified and directed.
M&L for 35mm thick 2nd calss hard wood (factory made) glazed and skeleton shutters, open rebated and prerpared to receive glass, gauge, etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing , glass etc. sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) complete all as specified.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with stainless steel wire staples or with wooden beading.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with stainless steel wire staples or with wooden beading.
S&F 125 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Dismantling wooden/ PVC Cup board shelves/ Kitchen shelves including frame work , in any position complete all as specified and directed.
Providing and fixing factory made 18(+0.7mm) thick PVC sheet both sided pre laminated sheet cabinet shutter. 18 mm(+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90 degrees and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per directions of engineer in Charge & Manufacturers's speciifcations. (Make: Rajshree)
M&L for preparation of new wood and wood based surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to stone/ concrete chowkhats with flat iron 40 x 3 mm size 75cm olng with necessary bolts, etc complete all as specified and directed.
S&F in repair Aluminium (Extrutded section) body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete. Make: Dyna and equvalent ISI marked.
Taking down shutters of any description exc. 1 Sqm but n.exc.2 Sqm each
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 75/100mm long MS screws complete.
Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitbale PVC sheet beading , and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings.
S&F stainlees steel SS 202 butt hinges 100mm complete all as specified and directed.
S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section.
S&F aluminium alloy handle 150 mm cast type anodised all as specified.
S&F 150 mm aluminium anodised barrel tower bolts of extruded section .
S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.
Demolition of brick work built in cement or cement lime mortor complete all as specified and directed.
M&L for brick work with sub class 'B'old size bricks straight or curved on plan exceeding 6 mtr mean radius,built in CM 1:6 complete all as specified.
Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius,built in CM 1:6. but except brick. Note:-Reusable Bricks obtained from item No 33 above shall be used
Taking down cement plaster from brick/concrete surface including raking out joints hacking for key scrubbing down with water etc complete all as specified .
M & L for 10mm thick rendering in cement mortor 1:6 on brick work or concrete surface of wall, surface finished even and smooth without using extra cement
M&L Rendering in two layer on fair faces of brick work or concrete sur-faces of wall 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately).
M & L for preparation of newly plastered surface of wall and applying two coats of Oil bound distemper over and including a coat of 3mm average thick birla/equivalent wall care putty over chalk whiting primer complete all as specified .
M & L for preparing new plastered surfaces of wall and applying two coats cement base paint over a coat of alkali resistant primer on external wall.
M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square area n. exc 0.5 sqm in each pane complete all as specified including hacking out old broken glass (any thickness &size,quality or description) from matel frame including punchung or drilling out old glazing pins/springs ,clips etc
M/s. RAMESH NARHARI VALEKAR
P K SHETH
Badri Electricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .