Providing Streat Light Work from botanical garden entry gate to boat club entry gate.

Supply & fixing of decorative pole virgo made of durable mild steel with a total height of 7 mtr above ground level. Pole bottom bas section shall be 250x250x1200m, 4mm thickness column with predesigned laser cut pattern to illuminate the surroundings in 20W with noticeable mode, next-section of double pipe of size 76x4000x3mm to work together to form unique design with mid-section of illuminated in warm white laser cut design with golden casting embellishment and predesign laser cut illuminated in warm white 60W single arm bracket of 2000mm long carrying street light fixture eagle of 100W. The bas plate of pole shall be of size 300x300x12mm. Provision for inside termination box with 4way connector & 1 Nos. 6 Amps MCB for local isolation. Eagle light fixture shall be made of die cast aluminum for street light distribution. Light output of source is more the 110lm/watt CRI>80, SPD4K, operating voltage 140-270V. Fitting is IP65, wired with branded LED and constant current driver. Proper thermal management for longer life of fixture. Led burnning of 50,000 hours. The pole is primarily coated with primer, secondary epoxy resin and top coated with UV stabilized powder coat and cured. The decorative pole is suitable for outdoor lighting application. Pole light is complete in all aspects with all accessories as per direction of E/I. Make Vak lighting india pvt.ltd./Ligman/Keselec.

Construction of civil foundation for 10m G.I. Pole (R.C.C. 1.2.4) size 600mmX600mmX2300mm having verticle m.s bar size 12mm-8 nos. & sqare m.s. Ring of 500mmX500mm of 8mm bar with 63mm HDPE pipe for cable entry size 0.50mX2Nos, etc complete in all respect as per direction of E/I.

Supply and fixing 40Amp TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch mctcring instrument & instrumcnt box with CTs etc. in case of TPN, complete in all rcspect as per direction of Engineer-in-charge.

S/L of following cable "Al" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make UPPPCL/Kesco Approved as per direction of E/I. complete in all respects.

(a) 10 sq.mm

(b) 35 Sq.mm 3.5Core

(c) 70 Sq.mm 3.5 core

S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18.

(a) 10 sq.mm.

(b) 35 sq.mm

(c) 70 sq.mm

S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole.

S/B of 600mmx600mmx6mm G.I plate vertically for earthing with it top at least 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe, plate up to switch board 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt etc. as per direction of E/I. Complete in all respects.

(a) Incoming 200 Amp. MCCB 1 No. Outgoing 100 Amp MCCB-1 Nos. & 63 Amp. MCCB-3 Nos.

Electric Work (PART-B)

S/F of double pole structure with 2 nos S.T. pole for S/S 410 SP-61 in 1:3:6 CC foundation 1/6 of pole length below G.I. and 30cm above G.I. 20cm thick around the pole with 1 nos. channel 100mmx50mm 1 Nos. channel 75mmx40mm necessary nuts bolts complete with painting etc. as per direction of E/I. (PSR) F.No.17/23-24

S/F of double pole structure with 2 nos S.T. pole for S/S 410 SP-61 in 1:3:6 CC foundation 1/6 of pole length below G.I. and 30cm above G.I. 20cm thick around the pole with 1 nos. channel 75mmx40mm 2 Nos. 3.5 Mtr. long 50mmx50mmx6mm angle iron for bracing necessary nuts bolts complete with painting etc. as per direction of E/I.

S/F of S.T Pole 12.00 mtr long designsted 410 SP-61 including base plate in 1:3:6 CC foundation 1/6 of pole length below G.I. and 30cm above G.I.around the pole 20cm thick and back filling etc. complete in all respect as per direction of E/I.

S/F of “V” shape cross arm of 75mmx40mm. (6.8Kg/Mtr.) channel on pole, pin hole for 11 K.V. pin insulator, distance between pin hole insulator is 1220mm and total length of channel 1818mm including half clamp made of 50x6mm flat iron complete with red enamel paint. as per direction of E/Ich.

S/F of M.S. Channel 1.38 meter long on top pillar size 100x50mm as per direction of E/I.

S/F of 11 KV Disc insulator including gun fitting on cross arm/clamps fixed on pole complete in all respects.

S/F of 11 KV Pin insulator with G.I. Bolt /spindle nut etc. complete in all respects.

S/E of over head line with A.C.S.R. conductor on pole/service bracket including binding etc. complete in all respects. Racoon/Dog

S/E of over head line with G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects .

S/F of Hexagonal cradle type guards made of 8 to 4 SWG G.I wire etc complete in all respects.. including binding .

S/F of henley type switch fuse unit complete in all respect as per direction of E/I.

S/E of stay set at 3.5mtr away from the pole with galvanized 19mm dia 1.8 mtr long stay rod 30cmx30cmx6.3mm anchor plate thimble stay clamp stay insulator 19mmx600mm double screw tightener, 7/3.5mm G.I. stay wire etc. in 1:3:6 C.C. in all respects.

S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole.

Painting of the electric pole with 2 coats of AL’ paint over red oxide primer complete in all respects .

S/F of 11000 V danger board and Fabricated from 10 Gauge MS sheet on pole on pole as per direction of E/Ich.

S/E of 11 K.V L.A. set of 3 Nos. suitable for mounting on steel support complete in all respect as per direction of E/I.

S/E of 11 K.V. T.P.M.O. switch on pole including handle rod etc. complete in all respects as per direction of E/Ich.

S/E of 11 K.V. D.O. fuse set on pole complete in all respect as per direction of E/I.

S/E of 2.24 mtr. Long cross arm 100mmx 50mm. channel on pole including clamps complete with red enamel paint as per direction of E/Ich.

S/F of level 2 following capacity 11/0.433 K.V. copper wound conventional 50Hz 3 phase oil immersed naturally cooled distribution T/F confirming and with amendments there of, having losses as per BEE standered with all standard fittings, including first filling of oil complete in all respects, of make Crompton, Kirloskar, Areva, Kanohar (Merrut) PME Noida & Univac. Or UPPCL/KESCO Approved.

S/B of 600mmx600mmx6mm G.I plate vertically for earthing with it top at least 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe, plate up to switch board 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt at least 150mm thick alround etc. as per direction of E/I. Complete in all respects.

S/L of following size cable "Al" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side an top on surface the cable run shall be fixed on MS clamp of suitable size, approved make i.e. Havels, Polycab, Krishna, Gloster as direction of E/I. complete in all respects. 501/2018.

(a) 120 Sq.mm 3½ Core

S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18.

(a) 70 sq.mm.

(a) 120 sq.mm.

S/L of 32mmx6mm GI strip from earth electrode directly in the ground as required complete in all respect .

Supply and laying of following type high conductivity 'AL' stranded compact circular conductor XLPE armored 11 K.V. gradc cablc neutral carthed system of the depth ol 1 Mtr bclow G.L. ovur a cushion of 75mm thick sand all'round and protected with burnt brick an side and an top of cable. shall be properly connected with the earth conductor by clamp etc. with thw cost of all material labour T&P etc required for proper completion of work. Make Gloster, Polycab, KEl, Havells Or UPPCL /KESCO Approved.(PSR)

(a) 3x120 sqmm

Trenchless horizontal boring with morc than 2 mtr. And up to 3mtr below ground level with 1U0mm HDPE pipe (PE-80 PN-6 Grade) by mechine technology including cost of HDPE pipe , T&P, Labour and all required material sultable for laying of HT 3300V cable 300sqmm to 400sqmm and 33000V HT cable 120sqmm to 4000 sqmm and 33000V HT cable upto 120sqmm with proper comletion of work.

S/L of following size XLPE cable box with out door jointing kit proper completion of work make Rachem/Mahindra as per direction of E/I.

120mm'2 3 core

S/L of following sizr: G l. "B" class pipe at a depth of 750mm below ground level as cable carrier as direction of E/I.

150mm Dia

SIE of 2.24 mtr. Long cross arm 50mmx50mmx 6mm. Angle iron on polc including clamps, eye bolts with red enamel paint etc. as per direction of E/1.

Deduct in item No. 26 of this estimate duc to cable is passed through Gl/M5/Hume/HDPE pipe the cost of pipe is to be extra.