Addn Altn to Main Entry Gate Lungewala gate at PRC Provn of 01 x Vegetable sorting shed at 48 I Sup PL ASC Ramgarh Special Repairs to Toilet Blocks Bathrooms of Bldg No P 148 Pen Paradaise at 17 Camp the SRC Ramgarh and Provn of 02xGuard Post with e

Amount

Demolition of RCC work in suspended slabs, beams, lintels, column etc., (reinforcement cut as required to facilitate demolition), complete all as specified and as directed.

Demolition of brick work built in cement mortar, lime mortar, complete all as specified and directed.

Dismantling of mild steel work including doors, gates but excluding frame truss etc., complete all as specified and directed.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc., or for shafts, wells, cesspit, manholes, pier holes etc., n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft and loose soil, complete all as specified and as directed. (12.5+16+24.4)

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc., or for shafts, wells, cesspit, manholes, pier holes etc., n.exc 10 sqm on plan and exc 1.5m but n.exc 3.00 mtr in depth and getting out in soft and loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm, complete all as directed. (10+15+16)

Removing excavated materials exc. 250 m but n.exc 500m depositing where directed at a level n.exc 1.5m above the starting point, complete all as directed. (8+8.4)

M & L for PCC (1:4:8) type D2 40mm graded stone aggregate as in, foundation, sub base, filling and mass concrete, complete all as specified and as directed. (1.92+2+2.4)

M & L RCC M-25 grade concrete as in foundation, including rafts, footings, foundation beams, plinth beams, bases of column etc., basement slabs, under-reamed piles and mass concrete etc., complete all as specified and as directed.(4.1+4.3)

M & L for formwork to sides concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter etc., complete all as specified and as directed. (9.75+11.60)

M & L RCC M-25 grade concrete as in columns, pillars, piers, post and struts etc., complete all as specified and as directed. (5.6+4.2)

M & L for formwork to sides pillar, posts, struts, columns and stanchions square or rectangular etc., complete all as specified and as directed. (40.2+56)

M & L RCC M-25 grade concrete as in plinth beams, beams, cantilevers, bressumers, lintel over span 1.5metre etc., complete all as specified and as directed. (3+5.04)

M & L for formwork to sides and soffit of beams, roof beams haunching girders, bressumers, lintel rectangular or polygonal, square etc., complete all as specified and as directed. (18.3+42)

M & L for providing 100 mm thick PCC 1:4:8 type D-2 (Using 40mm grade stone aggregate) including finished surface even and smooth using extra cement as in floor, path berm, etc, including necessary formwork of edge, complete all as specified and directed. (12.8+7.20)

M & L for providing 100 mm thick PCC 1:2:4 type B-1 (Using 20mm grade stone aggregate) including finished surface even and fair without using extra cement as in floor, path, berm, etc, including necessary formwork of edge, complete all as specified and directed.

M & L for 10mm thick backing coat in cement mortar (1:4) on vertical surfaces finished even and fair to receive tiles on concrete surface etc., complete all as specified and directed.

M & L for 12mm thick granite (of any type) tiles machine cut, as in skirting/dado laid over cement screed and joined with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite including grinding and polishing, complete all as specified and directed.

S & F mild steel framed work as in doors or gates of angle or other section with gusset plates, complete doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and also fastening (Fe 410W gde E 250) complete all as specified and directed. (690+95)

M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed by Engr-in-Charge. (24.5+45+2.5)

S & F mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed. (795+1820)

S & F mild steel TMT bars 5mm dia and over, as in stirrups cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified. (370+640)

M & L for brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 50 Kg/Sqcm) old size bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and as directed. (3.5+22+2+6)

Material and labour for rendering 15mm thick in CM(1:4) finishing surface even and smooth without using extra cement, on surfaces of brick or concrete surfaces, complete all as specified and as directed. (28+75+50+64.60)

M & L for preparation of newly plastered surface of walls using sand paper and applying two coats of cement base paint over a coat of cement primer, complete all as specified and as directed. (28+75+64.60)

Removing excavated materials exc. 50 m but n.exc 250m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as directed.

Hardcore of broken stone aggregate of gauge n exc 63mm, deposited, spread and levelled in layers not exc, 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. (4+2.54)

Supply only liquid integral proofing compound, complete all as specified and directed. (5+2)

S&F mild steel work in tubular trusses, purlins, rafters including special shaped washer etc. complete using any dia of MS pipe medium grade cut to length and fixed to walls for tubular roof trusses (framed), trussed, purlins, bracing etc., complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering as in parabola, semi circular shape, incline roof covering/cladding to wall/gate, fixed with self tapping screws complete all as specified and directed.

S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 using 20mm graded stone aggregate as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 and sand in the ratio 1:3, complete all as specified and directed. (25+20+18.90)

M & L for providing 100 mm thick PCC 1:4:8 type D-2 (Using 40mm grade stone aggregate) including finished surface even and smooth without using extra cement as in floor, path berm, etc, including necessary formwork of edge, complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exe. 0.11 sqm but n.exe.0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed. (42+52)

M & L glazed ceramic coloured tiles of size 375x250x7mm/450x300x7 mm thick as in dado/skirting etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thick cement plaster in CM (1:3), complete all as specified and directed. (10+72)

M & L for 40mm thick plain cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor finished, even and smooth without using extra cement, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M & L for providing 100 mm thick PCC 1:2:4 type B-2 (Using 40mm grade stone aggregate) including finished surface even and smooth without using extra cement as in floor, complete all as specified and directed.

M & L for providing 50 mm thick PCC 1:2:4 type B-1 (Using 20mm grade stone aggregate) including finished surface even and smooth without using extra cement as in floor, complete all as specified and directed.

Taking down cement plaster on brick wall or concrete surface etc.including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.

M & L for plastering 15mm thick on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement in CM 1:6, complete all as specified and directed.

Demolition of brick work build in cement mortar including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.

S & F 10 litres capacity PVC low level flushing cistern including flush pipe, float valve, siphon etc, including 32 mm dia PVC flush pipe of required length, including two Nos. PVC brackets, complete with all fittings incluidng connections and making good disturbed surfaces in CM 1:3, complete all as specified and directed by Engineer-in-charge.

S & F vitreous China squatting pan (Orissa pattern), of size 580x440 mm white with integral foot rests (excluding flusing cistern and flush pipe) including provn of lime concrete and backing joints, connection to trap and flushing pipe anti syphonage pipe etc., complete all as specified and as directed.

S & F vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and including seat and cover for pedestal pan, complete all as specified and directed.

S & F vitreous China wash hand basin, white, flat back, size 550X400mm including , chain and plug, and porcelain stopper, cast iron brackets and PCC (1:2:4) type B1 using graded stone aggregate for embedding brackets and making disturbed surfaces in CM(1:3), waste pipe complete including cutting for and pinning in ends of brackets and 32 mm dia waste fitting brass chomium plated for wash hand basin etc; with long screwed shanks and fly nuts, flange end bedded in red lead cement , complete all as specified and directed.Make:- Hindware/Parryware/Cera or of equivalent approved make.

S & F 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair for PVC connection pipe of 15 mm dia and 45cm long to WHB and flushing cistern, complete all as specified and as directed.

S & F 15 mm dia angle stop valve of cast copper alloy, fancy type, chromium plated, complete all as specified and directed.

S & F bib tap, 15mm, cast copper alloy CP, fancy type with capstan head handle screwed down for iron pipe and fixed to 15mm bore pipe after taking down old brass bib tap, complete all as specified and as directed.

S & F, 110mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.

S & F, 75mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.

S & F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal, with access door complete all as specified and as directed.

S & F PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal, with access door complete all as specified and as directed.

S & F 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F 75mm bore PVC(SWR) vent Cowl complete all as specified and directd.

S & F 75 mm dia outlet PVC(SWR) floor trap plain with steel grating including jointing with solvent cement, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 15mm dia pipe, complete all as specified and as directed.

Taking up and down GI tubing including GI fittings complete from trench/wall/ceiling/floor suitable for 20mm dia pipe, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked in new or old position to walls, ceiling, floors etc., suitable for 15 mm bore, complete all as specified and as directed.

S & F for GI tubing medium grade including all types of fittings of ISI marked in new or old position to walls, ceiling, floors etc., suitable for 20 mm bore, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete in new or old position to walls, ceiling, floors etc., suitable for 15 mm dia pipe, complete all as specified and as directed.

Refixing of GI tubing and connection including new GI fittings complete in new or old position to walls, ceiling, floors etc., suitable for 20 mm dia pipe, complete all as specified and as directed.

S & F, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls, with PVC clamps, including fixing pipe with PCC (1:2:4), etc. complete all as specified and as directed by Engineer-in-charge.

S & F, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls, with PVC clamps, including fixing pipe with PCC (1:2:4), etc. complete all as specified and as directed by Engineer-in-charge.

M & L for preparation of old surfaces of walls including washing, rubbing down and stooping of distempered surface and applying one coat of oil emulsion distemper, white or tinted, complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-In-Charge .

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes supplying & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as specified and as directed.

Supply and fix 200mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S & F in repair 100mm butt hinges medium weight medium cold rolled mild steel complete all as specified and directed by Engr-In-Charge .

S & F aluminium sliding door bolts 300mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engr-In-Charge .

S & F aluminium handles cast type 150 mm long, complete all as specified and directed by Engr-In-Charge.

S & F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and as directed.

S & F 2 way angle cock with flange(Chrome finish), complete all as specified and as directed.

M & L RCC M-25 grade concrete as in slab supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc., complete all as specified and as directed.

M & L for formwork to sides and soffits of suspended slabs, floor slabs, landings and similar work n.exc 200mm thick (horizontal or sloping), complete all as specified and as directed.

M & L for formwork to edge of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n.exc 10cm but n.exc 20cm wide, complete all as specified and as directed.

M & L for cement concrete type B1, 1:2:4 (using 12.5 mm graded aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed.

M & L for 40mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor, path, berm, etc., including even and smooth using extra cement, and including formwork of edge, complete all as specified and directed.

S & F Glass dividing strips, 3 mm thick and width of 38 mm, complete all as specified and as directed.

Material and labour for rendering 10mm thick in CM(1:4) finishing surface even and smooth without using extra cement, on ceiling finishing external surfaces, complete all as specified and as directed.

M & L preparation of newly plastered surface of walls and applying three coats of white wash on surface, complete all as specified and directed.

S & F framed work as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc., including cleats, brackets, etc., complete conforming to Fe-410-W (gde E-250 quality-A).

M & L for Water Proofing treatment on "non approachable/non accessible roof" surface (Horizontal and vertical surfaces) in following sequence through manufacturer/authorised applicator of the manufacturer all as specified and directed complete. (i) Applying approved bituminous based primer conforming to IS: 3384-1955 @ 0.3 Kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated. (ii) Laying APP (Atactic polypropylene Polymer modified prefabricated membrane) water proofing membrane of weight not less than 3 Kg/Sqm with minimum 100 mm side overlap along the length from downward to upward completely sealed with Torch apllication /hot blown lamps. (iii) Applying two coats of bituminous based aluminium paint @ 0.3 Kg/Sqm, complete all as specified and as directed.

M & L for rendering 10mm thick in cement mortar (1:4) on concrete/brick surfaces with liquid water proofing compound @ 200 ml/50 Kg per bag of cement or as per manufacturer instruction finished even and smooth without using extra cement over roof/sunken slab/wall complete all as specified and as directed. (Note: Water proofing liquid shall be measured and paid separately)

M & L for point wiring for one light/ fan point/call bell controlled by one switch with 1100 volt grade PVC insulated 1.5 Sq mm multi stranded copper conductor cable with continuous earth wire of 1.5 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia & sunken anodized pressed sunken boxes made out of not less than 1.6 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet for housing/fixing switches etc complete all as specified and directed.

All as per item No 89 here-in-before but 1.5 Sq mm for 5 Amp socket outlet on same board with 1.5 Sq mm earth wire complete.

S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed.

Supply and fix ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified.

S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified.

S & F in repair LED Bulb of capacity 15 Watts lumen output (500) length 102 mm dia 56 mm base cap B22, (ISI marked) complete with all accessories base (ISI marked) all as specified and directed by Engr-in-Charge. Cat Part no. LHLDERHEML8X015 of Havells or its equivalent Of make Bajaj/Phillips/Crompton Greaves, complete all as specified and as directed.

S & F in repair LED light fitting 1 x 20, 220 V, AC decorative box type with driver, holder including LED tube light 20W retrofit type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engr-in-Charge. Make: Havells/Bajaj/Crompton Greaves/Phillips.

S & F in repair LED light fitting 1 x 9W/1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. Make: Havell/Bajaj/Phillips/Crompton Greaves.

M & L for LED street lights aesthetically designed roadway luminaries with excellent thermal management 45 watt IP- 66 of Make : Crompton CAT Part No. LSTS-45-CDL-M or equivalent in Bajaj/Syska/Havells/Surya including connecting in existing circuit with flexible wire 2 core 2.5sqmm copper conductor 1.5mtr long all as specified and directed.

S & F 40 mm dia bore galvalume iron pipe light grade, bent to shape of length, 1.50 mtr with flat iron clamp of size 50mm x 6 mm nuts and bolts of 12 mm dia 100 mm long including washer duly painted with two coats of synthetic enamel paint over a coat of red oxide primer on mild steel surface including preparation of surface on pole/wall, complete all as specified and as directed.

S & F sheet metal enclosures for DBs single pole & neutral 4 way double door with with IP-43 IK-09 protection including 200 Amp rated bus bar and neutral link (ISI marked), complete all as specified and as directed.

S & F amp rating 240V, 10 kA 'C' Curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: IndoAsian or its equivalent make in Havells/Standard/L&T.

S & F amp rating 240V, 10 kA 'B' Curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: IndoAsian or its equivalent make in Havells/Standard/L&T.

Supply 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular stranderd conductor 6 Sq mm 2 core, including testing complete all as specified and directed.

M&L, for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, as shown in electrical plate No.3 of SSR Part-I, connected to earthing testing point all as specified and directed including excavation and connected work in hard/dense soil, PCC 1:3:6 ty C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm dia bore GI light grade as earth lead protection pipe, 50 mm thick RCC (1:2:4) type B-1 cover slab of size 300x300x50 mm as earth pit cover reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer, charcoal and testing complete all as specified and directed. Note : (a) Rate quoted deemed to be included of excavation and earthwork in any type of soil with PCC type C-1 in pit PCC cover (b) Earth test result should not less than one ohm.

M/s Ramgarh Raj Construction Pvt Ltd

Paras Nath Singh

M/S Kunwar Construction

M/s Shobha Construction

M/s Ray construction

om suppler

ganpati enterprises