Supplying Installation Testing and Commissioning of Electrical Installations Fans Fittings Earthing Lightening conductor etc for External Project work at 30 Bedded Civil Hospital at Dalash Teh Anni Distt Kullu HP

Supplying, installation, Testing & Commissioning of Panel light of following sizes and body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50 Hz, Operating temperature range -50°C to 40°C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD<10%, P. F. ≥0.95, IP20, CRI≥80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends, CCT 4000°K/5700°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (Preferred make Philips/ Wipro/ Havells/ Crompton/ Bajaj/ Osram/ Surya or Similar Superior)

600mm x 600mm (Nominal dimension) Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) 36 watt surface mounting type

600mm x 600mm (Nominal dimension) Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) 36 watt Recess mounting type

300mm x 300mm Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) 24 watt surface mounting type

300mm x 300mm Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) 24 watt recess mounting type

1200mm x 300mm Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) 36 watt surface mounting type

1200mm x 300mm Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) 36 watt recess mounting type

Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, frequency 50Hz, Operating temp range -5°C to 40°C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 4000°K/5700°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (Preferred make Philips/ Wipro/ Havells/ Crompton/ Bajaj/ Osram/ Surya or Similar Superior Make)

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) 40 Watt