VARIOUS WORKS AT VARIOUS PLACES

RENOVATION WORK OF BSK ROOM WITH IN NADIA COLLECTORATE BUILDING IN NADIA

Room painting with good quality interior luxury emulsion paint along with putty and good quality primer, finishing in velvet touch ,Surfaces shall be thoroughly cleaned to remove any dust, oil & grease with suitable cleaning agent followed by rinsing with clean water. Damaged painted areas shall be scrubbed thoroughly to achieve a clean surface. Pits / abrupt undulations shall be filled with compatible putty wherever required ( 15sqm main room and 10sqm for entry passages) inner and outer part

Supply of CABIN DESK ( Customised as per requirements)2. TABLE TOP & GABLE END - 25MM Thick Pre Laminate Particle Board top with teak wooden material with 2m Thick PVC Edge banding as per approved shade.WIRE CARRIER - .8-1 MM Thick CRC sheet with metal powder coated finish as per approved shade.4. WIRE RISER COVER - .8-1 MM Thick CRC sheet with metal powder coated finish as per approved shade.5. FLAPPER - Access Flap Powder Coated Finish 450 X 120. 6. MODESTY PANEL - 18MM Thick Pre Laminate Particle Board with 2mm Thick PVC Edge banding as per approved shade. 7. SIDE COMBO UNDERCOUNTER STORAGE - 900 W X 600D X 600H MM, Side Runner top made of 36mm thk. Prelam Particle board with PVC edge banding. 18mm thk Prelam Particle board side , Shelves, Drawers & Openable shutter with PVC edge banding. Back in 9mm thk Prelam Particle board with Handles/Locks & required accessories with locks arrangements at BSK Room

Construction of wood structures with waterproof plywood partitions: frame work made out of 35mmx35mm thick hard wood and nailed with 16mm. thick ply and finished with 1.5 mm. Thick laminates of approved colour and design on both the surfaces of the frame work as per drawing and design.The edges to be covered with decorative wood moulding with two coat of superior wax polish.The work is to be finished with all material ,labour,nails,screws,hings,locks,handles,door closer and all other hard wares as per requirements.

Supply, fitting and fixing of fully 2 side coverd upto 5ft height from ground with front good quality fiber glass TABLE PARTITION Material: BWP ISI Grade Plywood, Finish: hot dip galvanized or epoxy coated or enamel painted, or powder coated , (length will be Customized as per requirements

High-impact hanging ceiling directional signage. Designed to be visible from every angle,Sizes Available: Customisable with widths ranging from 800mm to 1200mm, and heights tailored to fit your content perfectly Material: Durable Foamex PVC or sleek aluminium Fixings: Secure ceiling cable systems for signs ranging from 3mm to 7mm in thickness Printed Sides: Choose between single or double-sided printing Additional Finishing Options:*: Gloss or Matt lamination

High-impact hanging display board. Designed to be visible from every angle,Sizes Available: 5FT X 7FT and 12FT X 2FT,Louvered design of casework helps to increase contrast in high ambient light, Material: Durable Foamex PVC or sleek aluminium Fixings: Secure ceiling cable systems Incasement in aluminium extruded profile, black powder coated Low power consumption & low heat

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative , 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

Fitting and fixing of Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in -Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974

3 Seater SS waiting chairs with two arms and backrest made of SS 304 grade materials, overall length 1500 mm, width 450 mm and height 900 mm.sheet thickness 1.5 mm. final product will be matt finished.

A) Electrical installation for room, including the switchboard, lighting, power outlets, and wiring. The switchboard, located 1.5 meters above the floor near the entrance, will feature a 40 A main switch, distribution MCBs (10 A for lighting, 16 A for power outlets), and a 30 mA, 40 A RCD for safety. B)The lighting system will include energy-efficient LED fixtures, with wiring using 1.5 mm² or 2.5 mm² copper cables routed through PVC conduits. Single-pole switches will be mounted at 1.2 meters height. Power outlets (13 A, 240 V) will be installed, with additional outlets for heavy equipment rated at 16 A or 20 A. C)A dedicated 20 A circuit will be provided for air conditioning. The earthing system will comply with safety standards, ensuring resistance does not exceed 1 ohm. After installation, the system will undergo testing and commissioning.

CONSTRUCTION OF TIN SHED FOR STAFF ROOM WITH WINDOW NET ,KITCHEN ROOM FLOOR AND OTHER RELATED WORKS AT ADM LR BANGLOW IN NADIA

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work with all ms structure of sqaure bars height upto requirements ) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap..(i) In Roof

Supply , fitting and fixing of Stainless Steel Window Fly Screen Mesh at staffroom window Stainless steel insect mesh is made of the basic stainless alloy. corrosion resistanced ,Mesh count per inch-18 × 14, Wire diameter - 0.22 mm (Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm)-25mm(7' x 3.5')-2 nos door,(4.5'x3.5') 1 nos window,

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. room size- 10ft x 5ft

Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. with shelf system complete fittings with shelf door. Arrangements as per requirements of works (a) Slab Thickness 20 to 25 mm

Supply of Jaquar Under Counter Basin With Fixing with Jaquar brand Accessories-Size: 485x370x205 mm, Shape: Rectangular Fruit buckets ,Shop Dispenser 30X18X9 In Black Nano Coating Integrated Waterfall Kitchen Sink Multifunction Faucet Tap, Glass Washer Vessel Sink, all necessary traps premium quality, PVC pipes (required as per necessary) including roof top PVC water tank with connections and distributing water as per requiremets zones.

CONSTRUCTION OF TIN SHED FOR GYM ROOM AND OTHER RELATED WORKS AT DM BANGLOW IN NADIA

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work with all ms structure of sqaure bars height upto requirements ) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. Including Painting Complete structure painting 01 coat red, oxide followed by 02 coat enamel synthetic paint. (As per color choice).(i) In Roof

Supply , fitting and fixing of M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs and M.S. round or square bar grating of windows etc. fitted and fixed in holes of window frame and with intermediate flat bar stiffener( with necessary holes for the grating bars and with the ends turned and fixed to timber frame with necessary screws) complete, as directed INCLUDING (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand, papering etc.

Supply, fitting and fixing of socket outlet points include all works necessary in complete wiring lenghth about 250ft with MCB board with starter 16Amp, 32Amp DC starter for AC connection, 16Amp plugpoint (16 nos) and 5Amp plugpoint (20 nos) Modular GI boards of 14nos including 50Amp LED tubelights and LED Flood Light ( 50 Amp and 100amp total 5nos) to the the controlling switch . The scope of wiring for a point shall, however, includes the wiring work necessary in tapping from another point in the same distribution circuit with supply of All fixing accessories such as clips, nails, screws, Phil plug, raw plug etc. as requirement

PARTHA SARATHI PODDAR