Tender for the Work of Supply and installation of 11/22 kv distribution Transformer HT/LT Terminal Protector And Supply of HT/LT Booting, Transformer Earthing, Sleeves ( Conductor Cover), Bird Guard in Any Scheme For Transformers (Including Installation) In Solsumba Sdn Under Vapi Industrial Division.

Capital Work Labour Rates for F.Y. 2024-25 (Without GST)

Item Code Item Unit Rate QTY. Amount

1 9926000064 Binding of messenger Conductor at NO

with a distance not more than

mtr with 6 turns minimum on XLPE

Cable with single strand binding

wire (including cost of binding

2 9926000086 Supply and Installation of 11/22 kV PER SET

Distribution Transformers HT

Terminal protector (UV Resistance)

with using 95/120/150 sq.mm long

barrel aluminum lug. (1Set =

Nos i.e. on R, Y, B)

3 9926000087 Supply & Installation of HT EPR PER SET

Tap on 11/22 kV Distribution

Transformer with replacement of

bare conductor by HT ABC

conductor (DO bottom side to

transformer) after removal of

semiconductor by HT ABC (6 inch

both side). HT ABC to be supplied

by DGVCL. (1Set = 3 Nos i.e. on R,

4 9926000088 Supply, Installation, Testing and NO

Commissioning of Maintenance

Free, Ready Capsule, Pipe-In-Cage

(Pic) Type, Earth Electrodes for HT

Feeder Pole Having 2000 mm

Electrode Length as per the Tender

Specifications and Drawing. (All

Materials Will Be Supplied By

5 9926000089 Supply, Installation, Testing and NO

Commissioning of Maintenance

Free, Ready Capsule, Pipe-In-Cage

(Pic) Type, Earth Electrodes for HT

Feeder Pole Having 3000 mm

Electrode Length as per the Tender

Specifications And Drawing. (All

Materials Will Be Supplied By

File No: DGVCLDVPI/TEN/e-file/4448/2026/3074/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI

Letter No: DGVCLDVPI/0611/09/2026 Approved Date: 29-09-2026 17:18

6 9926000090 Supply and Installation of 25 X 3 Meter

mm GI Strip having hot dip-

galvanized-zinc coating of 80-100

microns without any joints or

welding. Both the end of the GI

strip should be connected with GI

nut bolts and required fabrication

work for giving separate earthling

connections to (1) Neutral of the

transformer(2) MS structures of

the transformer center

(Approximately 25 meter GI strip

per transformer center- as per

requirement and instruction of

Engineer in- charge) (All Materials

will be supplied by Agency)

7 9926000092 Supply and Installation of uPVC Meter

standard make Pipe of 1.25"

diameter for covering GI strip with

UV protected Cable Ties of 550 X

7.6 mm size to bind with pole

face(Approximately 25 meter uPVC

pipe for GI strip covering per

transformer center -as per

requirement and instruction of

Engineer in-charge.

8 9926000093 Supply & fixing of up to 33 kV per TC

Conductor sleeve for Bus bar to

Drop out Fuse and Drop out fuse to

Transformer H.T. including Bus bar

(12 mm sleeve) as per technical

specification. (All Materials will be

supplied by Agency)

9 9926000094 Supply & fixing of up to 33 kV per TC

Conductor sleeve for Bus bar to

Drop out Fuse and Drop out fuse to

Transformer H.T. including Bus

bar(15 mm sleeve) as per technical

specification. (All Materials will be

supplied by Agency)

10 9926000095 Supply & fixing of Disc type Red NO

Color FRP(Non-flammable)

material with Weather resistant,

Non-conductive bird guard

OD=300 MM, ID=33 MM, Width

=1.25 MM, one side cut from ID to

OD. (All Materials will be supplied

11 9926000096 Providing and fixing of LT Terminal NO

protectors i.e. Re-useable boot (LT

Side 1.1 kV) including LT (1.1 kV)

insulating taps. All live part at LT

side shall be covered with fixing of

LT insulating taps.

Nylon Net around Transformer

Nylon Net (12 * 15 ft)

File No: DGVCLDVPI/TEN/e-file/4448/2026/3074/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI

Letter No: DGVCLDVPI/0611/09/2026 Approved Date: 29-09-2026 17:18

12.3 9926000099 Labour charge for fitting Nylon Net Per tc

(All fabricated material for fitting

nylon net shall be provided by

TOTAL ESTIMATE COST RS.

1 DGVCL will provide key material like MS materials, ABC/Bare conductors, PSC/RSJ

poles, Insulators, Fabricated materials etc. to the contractor.

2 All fabricated items shall be fabricated as per DGVCL approved drawing and by

welding rods confirming to the relevant ISI specification and as directed by Engineer

3 Necessary electricity connection for fabrication items shall be provided by DGVCL on

payment of required charge for connection & electricity bill of the same shall be paid

4 All the rates are inclusive of PF and Exclusive of GST applicable time to time

5 Work to be carried out after issued of Sub work order by S/dn. Office not prior to that.

6 All steel material are to be painted as below :

(A) Scrubbing of rusted surface properly before applying the paints on to the RSJ

poles & steel fabricated materials of RSJ/PSC poles is must require.

(B) Two coats of approved ISI mark red oxide (primer) is to be properly painted for

the RSJ poles & Steel fabricated materials of RSJ/PSC poles.

(C) Two coats of approved ISI mark Silver paint (i.e. triple mangoes or equivalent

quality silver paint) is to be properly painted on to the RSJ poles & Steel fabricated

materials of RSJ/PSC poles.

7 Submission of Bill for Supply/Purchase of KIT Cable Usage, with bifurcation of Supply

amount along with Labor.

8 Any material (XLPE / Aerial Bunch Cable, Joint Kit etc.) provided by contractor is

approved by DGVCL make, specification and submission of Invoice with purchase bill.

9 The rates are inclusive of dismantling charges of existing bare conductor and

crediting in to store & dismantling of service lines from LT bare conductor and to

provide service connections on ABC by insulated pierce connectors through service

connection box.

10 The contractor has to collect all the required materials from DGVCL store as well as

credit the dismantle material to the DGVCL store at their cost.

11 Labor Wellfer Cess @1% shell be Deduction in Bill Amt.

EXECUTIVE ENGINEER (O&M);

DGVCL; VAPI IND DIV.

File No: DGVCLDVPI/TEN/e-file/4448/2026/3074/Account

Approved By: Executive Engineer,Technical,DGVCLDVPI