Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC | L1 | Accepted-AOC Techno-commercially acceptable | |
| 2 | L2₹4.7 L+₹22,366.40 (5.00%)Rejected-Finance AT JHARKHAND 15 NO KEDLA DIST RAMGARH JHARKHAND | RAMGARH | JHARKHAND | 825101 | L2 | Rejected-Finance Higher Quoted rate | |
| 3 | Rejected-Technical FAKODIH KUJJU MANDU RAMGARH JHARKHAND 825314 | RAMGARH | RAMGARH | JHARKHAND | 825314 | - | Rejected-Technical Technically rejected |
Tender Value
Refer Docs
EMD Value
₹5,600
Closing Date
23 May 2025, 10:00 amClosed
PE EnM
KOCP
Renovation of Earthing arrangement at Magzine room and dismantling, erection of 3.3KV over head line work at Kedla chowk near 250KVA transformer of KOCP Under Hazaribagh Area
2025_CCL_335268_1
PO/KOCP/EnM/Tender/25-26/01
Open Tender
Electrical and Maintenance Works
Item Rate
15 days
KOCP
As per NIT
2 documents required · 2 mandatory
₹5,600
2 Aug 2025
12 May 2025
24 May 2025
13 May 2025
23 May 2025
13 May 2025
13 May 2025 - 17 May 2025
Amount
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre
Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required. 5 span x 50 m x 3 wire x 324 kg/ Km
Erection of Angle iron/channel cross arm on woodeN/RCC/PCC/Steel tubular/Rail Poles etc as required.
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.
Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required
Making of cradle guard by supplying 6 SWG GI wire
Erection of cradle guard as required
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)(4 X 1 X 0.8 X 0.125 X 5=2.8 )
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)(0.675 X 0.675 X 0.5 X 5=1.6)
12 mm cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand)(4 X (0.675 X 0.5 + 0.925 X 1 + 0.8 X 0.125) X 5)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal dia Pipes
Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 90 mm long, weighing not less than 93 gms
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (25mm nominal bore)
Total impact of GST for the purpose of CTC
M S VIJAY CONTRACTOR SUPPLIER (BID ID -1154948)
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .