Repair and renovation works of the outside portion of the Administrative Building along with Electrical repairing works for campus lighting and pump room of West Bengal Co Operative Milk Producers Federation Limited , LB-2 , Salt lake , Kolkata-70010

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:6 cement mortar.(c) 15 mm thick plaster

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 ii) 5mm thick coloured / tinted / smoke glass.

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge)

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. a) Normal Acrylic Emulsion

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (ii) 110 mm. Dia.

ELECTRICAL REPAIRING WORKS

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connectionLegrand make 63 A FP

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Avg Run 10 Mtr

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)(for 25 nos power plugs) for SPN DB to Power Plugs

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

Supply and Fixing 20W LED tube Crompton make with batten fitting incl all accessories directly on wall /celling with screw.

Supply and fixing Crompton make LED street 100W light LSTP-60-CDL INCL Fixing outdoor type fluorescent/SV/MV light fitting on pole including supply anf fixing 25 mm dia arm bracket

supply and installation of Lauritz Knudsen MK1 DOL, Starter - 6 HP | Relay Range 6-10A | Coil Voltage 400/440V AC

Supply and laying of 1.1 KV Aluminium Armoured Cable 2 core 10 sqmm Mescab/Polycab/Gmescab make/Currency

Add: G.S.T. @ 18% of Rs.4,51,448=92 ( sum of Sl. No. 1.01 to 2.10) i.e. Rs. 81,260=81

Add: Labour Cess @ 1% of Rs. 5,32,709=73 (sum of Sl. No. 1.01 to 3.01) i.e. Rs. 5327=10

Please Enable Macros to View BoQ information