REPAIR TO WOODEN FURNITURE LIKE CHANGE OF UNSERVICEABLE FRAMES, PLYWOOD, PRELAMINATED PARTICLE BOARD, TABLE TOP AND RECANNING OF CHAIRS INCLUDING POLISHING ETC AT ARMY AREA TRICHY AND REPAIRS TO SOFA AND WRITING, COMPUTER CHAIR MAP, REVOLVING CHAIRS

Amount

TABLE 900X600X760 MM WITH DARAWER WOODEN (FD - 283) FD-283 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table 900x600x760 mm with drawer all as per drg and as directed.

FD-283 : M&L removing unserviceable top of Table 900x600x760 mm with drawer and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed.

FD-283 : Taking out broken Stiffener of Table wooden 900 x 600 x 760 with drawer and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

TABLE CENTRE (FD - 274) FD-274: M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table Centre all as per drg and as directed.

FD-274 : M&L removing unserviceable top of Table Centre and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-274 : Taking out broken legs of Table Centre and supply and fixing new leg of required size made out of well seasoned 1st class teak wood without damageing to other parts, all as per drawing & as specified and directed by the Engr-in-Charge.

TEAPOY (FD-278/232/382) FD-278, FD-382, FD-232 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Teapoy all as per drg and as directed.

FD-278, FD-382, FD-232 : M&L removing unserviceable top of Teapoy and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-278, FD-382, FD-232 : Taking out broken legs of Teapoy and supply and fixing new leg of required size made out of well seasoned 1st class teak wood without damageing to other parts, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-278, FD-382, FD-232 : M & L for replacement of damaged Front rail of Teapoy with well seasoned 1st class teakwood, all as per drawing & as specified and directed by the Engr-in-Charge Including taking out old front rail without damageing other part of the Teapoy.

CHAIR WRITING (FD-280) FD-280 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Writing all as per drg and as directed.

FD-280 : Taking down old worn out Plastic Cane from Chair Writing and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round plastic cane. Canning shall be done with Godrej pattern. All as per drg or as directed by Engr-in-Charge. (Make : AJAY/PREMIER)

CHAIR EASY (FD-229) FD-229 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Easy all as per drg and as directed.

FD-229 : M/L for removing but unservicable rubber/PVC bush from Chair Easy and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing chair and all as per drg and as directed.

FD-229 : Taking down old worn out Plastic Cane from Chair Easy and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round plastic cane. Canning shall be done with Godrej pattern. All as per drg or as directed by Engr-in-Charge. (Make : AJAY/PREMIER)

CHAIR DINING (FD-228/279) FD-228/279 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Chair Dining all as per drg and as directed.

FD-228/279 : M/L for removing but unservicable rubber/PVC bush from Chair Dining and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing chair and all as per drg and as directed.

FD-228/279 : Taking down old worn out Plastic Cane from Chair Dining and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round plastic cane. Canning shall be done with Godrej pattern. All as per drg or as directed by Engr-in-Charge. (Make : AJAY/PREMIER)

PEG TABLE (FD-277/384) FD-277/384 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Peg Table all as per drg and as directed.

FD-277/384 : M&L removing unserviceable top of Peg Table and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-277/384 : M/L for removing but unservicable rubber/PVC bush from Peg table and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table wooden 900 x 600 x 760 with drawer and all as per drg and as directed.

FD-277/384 : M & L for replacement of Leg of Peg table with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

TABLE DINING 8 PERS (FD-376/239) FD-376/239 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table dining 8 pers all as per drg and as directed.

FD-376/239 : M&L removing unserviceable top of Table dining 8 pers and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-376/239 : Taking out broken stiffener of Table dining 8 pers and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

FD-376/239 : Taking out broken Leg of Table dining 8 pers and supply and fixing new Leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge.

TABLE DINING 6 PERS (FD-273) FD-273 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table dining 6 pers all as per drg and as directed.

FD-273 : M&L removing unserviceable top of Table dining 6 pers and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-273 : M & L for replacement of Leg of Table dining 6 pers with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

TABLE 900X900X760 MM(FD-291) FD-291 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table 900x900x760 mm all as per drg and as directed.

FD-291 : M&L removing unserviceable top of Table 900x900x760 mm and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-291 : M/L for removing but unservicable rubber/PVC bush from Table 900 x 900 x 760 mm and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table wooden 900 x 600 x 760 with drawer and all as per drg and as directed.

FD-291 : M & L for replacement of Leg of Table 900 x 900 x 760 mm with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

TABLE DRESSING GENTS (FD-379/230) FD-379/230 : M/L for preparing the existing wooden surfaces of table dressing gents with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table dressing Gents all as per drg and as directed.

FD-379/230 : M/L for removing the old and unserviceable mirror of Table dressing gents and supply and fix new mirror of size 380 x 760 or suitable for Table dressing gents all as per Drg and as directed by Engineer in Charge.

FD-379/230 : M/L for removing the old and unserviceable drawers of Table dressing Gents and supply and fix new drawers including one No CP Knob as per specified in drg and as directed by Engineer in Charge.

FD-379/230 : M/L for removing the old and unserviceable Knob of Table dressing Gents and supply and fixing new knob . All as per Drg and as directed by Engineer in Charge.

TABLE DRESSING LADIES (FD-251/378) FD-251/373 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table dressing ladies all as per drg and as directed.

FD-251, FD-378: M/L for removing the old and unserviceable mirror of Table dressing ladies and supply and fix new mirror of suitable size for Table dressing ladies all as per Drg and as directed by Engineer in Charge.

FD-251, FD-378 : M/L for removing of unserviceable back of Table dressing ladies and supply and fix new back suitable for the existing table dressing ladies made of 18/19 mm thick plywood and all as per drg and as directed.

FD-251, FD-378 : M/L for removing the old and unserviceable drawers of Table dressing ladies and supply and fix new drawers as per specified in drg including replacement of knobs as per specification for Table dressing ladies all as per Drg and as directed by Engineer in Charge.

FD-251/378 : M & L for replacement of Sliding glass shutter Table dressing ladies of size 300x290x5 mm thick , ordinary quality, as per drawing and directed by the Engr-in-Charge including taking out old glass shutter.

FD-251/378 : M & L for replacement of Bottom of Table dressing ladies with 18/19 mm thick particle board commercial type, exterior grade confirming to IS-3087-1989 and ISI marked all other as per existing and as per drawing. All as specified and directed by Engr-in-Charge including taking out old bottom.

FD-251/378 : M & L for Repairs to table dressing ladies by taking down the existing broken /unserviceable wooden leg and replacing the same with new leg made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-251/378 : M & L for Repairs to Table dressing ladies by taking down the existing broken /unserviceable sides and supply and fixing of new side of suitable size made of 18/19 mm thick commercial type particle board, exterior grade with 1 mm thick plastice laminated sheet, teak vaneered pested over with approved adhesive complete all as specified and directed and as shown on drawing.

FD-251/378 : M & L for Repairs to Table dressing ladies by taking down the existing broken /unserviceable Top and supply and fixing of new Top of suitable size made of 18/19 mm thick commercial type particle board, exterior grade with 1 mm thick plastice laminated sheet, teak vaneered pested over with approved adhesive complete all as specified and directed and as shown on drawing.

BED HARD (FD-246/247) FD-246, FD-247 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table Writing all as per drg and as directed.

FD-246, FD-247: M/L for removing the old and unserviceable ply wood top of Bed Hard and supply and fix new 12 mm thick commercial water proof plywood, including avoiding shaking by providing 4 brackets all as per Drg and as directed.

TABLE WRITING (FD-275) FD-275 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table Writing all as per drg and as directed.

FD-275 : M&L removing unserviceable top of Table Writing and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-275 : M/L for removing but unservicable rubber/PVC bush from Table Writing and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table writing and all as per drg and as directed.

FD-275 : M/L for removing of unserviceable back of Table Writing and supply and fix new back suitable for the existing table writing made of 6 mm th plywood and all as per drg and as directed.

FD-275 : M/L for removing the old and unserviceable drawers of Table Writing and supply and fix new drawers including one No CP Knob as per specified in drg and as directed by Engineer in Charge.

FD-275: M/L for removing the old and unserviceable Knob of Table Writing and supply and fixing new knob . All as per Drg and as directed by Engineer in Charge.

FD-275 : M & L for removing the old and unserviceable leg of Table writing and replacing the same with new made of well seasoned first class teak wood after cutting made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-275 : M & L for removing the old and unserviceable Stiffener of Table writing and replacing the same with new made of well seasoned first class teak wood after cutting made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-275 : M & L for removing the old and unserviceable Shutter of Table writing and replacing the same with new made of 18/19 mm thick prelaminated particle board one side teak face and other side balancing white including all around teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins including replacement of hinge as per the existing specification complete all as specified and directed and as shown on drawing.

SIDE BOARD (FD-241) FD-241 : M & L for Repairs to Side Board by taking down the existing broken / unserviceable top and supply and fixing of New top of suitable size made of 18/19 mm thick prelaminated particle board one side teak face & other side balancing white including all around teak wood beading of 6 mm thick fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing.

FD-241 : M & L for Repairs to Side Board by taking down the existing broken / unserviceable Door shutter and supply and fixing of New Door shutter of suitable size made of 18/19 mm thick prelaminated particle board one side teak face & other side balancing white including all around teak wood beading of 6 mm thick fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing.

FD-241 : M & L for Repairs to Side Board by taking down the existing broken / unserviceable Drawer and supply and fixing of New Drawer of suitable size made of 18/19 mm thick prelaminated particle board one side teak face & other side balancing white including all around teak wood beading of 6 mm thick fixed with adhesive and panel pins complete all as specified and directed and as shown on drawing.

FD-241 : M & L for Repairs to Side Board by taking down the existing broken / unserviceable back and supply and fixing of new back of suitable size made of 6 mm thick commercial plywood grade BWR complete all as specified and directed and as shown on drawing.

TABLE 900X900X760mm with sunmica top (wooden) (FD-291) FD-291 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Table 900x900x760 mm all as per drg and as directed.

FD-291 : M&L removing unserviceable top of Table 900x900x760 mm and providing new top of 18/19mm thick prelaminated particle board of exterior grade fixed on one side PVC edging/ teak wood beading all around as per drg and as directed

FD-291 : M/L for removing but unservicable rubber/PVC bush from Table 900 x 900 x 760 mm and supply and fix new hard rubber bush of suitable size 4 Nos each to the existing Table wooden 900 x 600 x 760 with drawer and all as per drg and as directed.

FD-291 : M & L for replacement of Leg of Table 900 x 900 x 760 mm with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

FD-291 : M & L for replacement of Leg of Table 900 x 900 x 760 mm with new Front rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

FD-291: M & L for replacement of Leg of Table 900 x 900 x 760 mm with new Side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts of the table.

SOFA SET 5 SEATER (FD-281/373) FD-281/373 : M/L for preparing the existing wooden surfaces with using sand paper, removing the stains filling knots cracks etc with bees wax complete and applying one coat of French polish of approved quality to obtain a smooth and glossy finish to the wood work of Sofa Set 5 Seater all as per drg and as directed.

FD-281/373 : M & L for replacement of Front leg of Sofa Set 5 Seater with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M & L for replacement of Rear leg of Sofa Set 5 Seater with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engr-in-Charge including taking out of old broken legs without damageing to other parts .

FD-281/373 : M&L removing Old cushion together with old faded Tapestry cloth of sofa set (five seater) and provide 100mm synthetic foam 40 density cushion covered with new tapestry cloth not less than Rs.400/ per mtr for seat and back as specified and directed. Chain and Zip also to be fixed.

FD-281/373 : M & L removing old faded tapestry cloth of sofa set five seater) and providing new tapestry cloth not less than Rs.400/ per mtr for seat and back all as specified and directed.Chain and Zip also to be fixed.

FD-281/373 : M & L for replacement of Sofa set 5 Seater by taking down the existing broken /unserviceable wooden Long rail and replacing the same with new Long rail made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD-281/373 : M & L for replacement of Sofa set 5 Seater by taking down the existing broken /unserviceable wooden Short rail and replacing the same with new Short rail made of well seasoned first class teak wood after cutting, made to shape and size as required all as shown on drawing complete all as specified and directed.

TABLE BED SIDE MAP (FD-E6/MAP/15 (R) FD/E6/MAP/08 (R) : M/L for removing dirt and rust by scrapping with emery paper from Bed Hard, preparing the surfaces smooth and applying one coat (Internal & External surface) of synthetic enamel paint (RFU Black) by spraying with spray machine over old painted surfaces outside and inside including stiffener and all as per drg and as directed.

FD/E6/MAP/08 (R) : M & L for Repairs to Table bed side by taking down the existing broken / unserviceable back of Table bedside and supply and fix new back suitable for the existing table bedside made of 18/19mm thick prelaminated particle board one side teak face & other side balancing white complete all as specified and directed and as shown on drawing.

FD/E6/MAP/08 (R) : M/L for removing of unserviceable drawer of Table bedside and supply and fix new rack suitable for the existing table bedside and all as per drg and as directed.

BED HARD (FD/E6/MAP/08 (R) FD/E6/MAP/08 (R) : M/L for removing dirt and rust by scrapping with emery paper from Bed Hard, preparing the surfaces smooth and applying one coat (Internal & External surface) of synthetic enamel paint (RFU Black) by spraying with spray machine over old painted surfaces outside and inside including stiffener and all as per drg and as directed.

FD/E6/MAP/08 (R) : M&L removing existing unserviceable/broken Plywood top from Bed Hard (FD/MAP/08 (R)) and supply and fixing new 12mm thick commercial plywood of ISI Mark and fix by appropriate size nut bolt with washer of required size and as per drg and as directed.

FD/E6/MAP/08 (R) : M & L for removing the old unserviceable leg by taking down the existing broken/ unserviceable leg and replacing the same with new leg Made of steel as required all as shawn on drawing complete as all as specified and directed.

FD/E6/MAP/08 (R) : M & L for Repairs to Bed Hard by taking down the existing broken /unserviceable steel Long rail and replacing the same with new Long rail made of Tata/Jindal, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD/E6/MAP/08 (R) : M & L for Repairs to Bed Hard by taking down the existing broken /unserviceable steel Short rail and replacing the same with new Short rail made of Tata/Jindal, made to shape and size as required all as shown on drawing complete all as specified and directed.

FD/E6/MAP/08 (R) : Taking out carefully old/ unserviceable steel head board frame made of steel requide size without damagine the adjoining parts and S & F (New) head board including partical board plank of size 18/19mm one side teak wood and other side balanceing white all as shown on drawing complete as specified and directed.

FD/E6/MAP/08 (R) : Taking out carefully old/ unserviceable steel foot board frame made of steel requide size without damagine the adjoining parts and S & F (New) head board including partical board plank of size 18/19mm one side teak wood and other side balanceing white all as shown on drawing complete as specified and directed.

BRANDED FURNITURE M&L Removing the unserviceable hydraulic lift assembly of chair revolving with high back and arms rest with castors (Revolving vhair) and providing following new parts including tightening of the frame work complete all as per FD drawing, as specified and directed.

M&L Removing the unserviceable hydraulic lifter knob of chair revolving with high back and arms rest with castors (Revolving vhair) and providing following new parts including tightening of the frame work complete all as per FD drawing, as specified and directed.

M&L Removing the unserviceable ploy urythane arm rest of chair revolving with high back and arms rest with castors (Revolving vhair) and providing following new parts including tightening of the frame work complete all as per FD drawing, as specified and directed.

M&L Removing the unserviceable pedestal assembly of chair revolving with high back and arms rest with castors (Revolving vhair) and providing following new parts including tightening of the frame work complete all as per FD drawing, as specified and directed.

M&L Removing the unserviceable castard wheel of chair revolving with high back and arms rest with castors (Revolving vhair) and providing following new parts including tightening of the frame work complete all as per FD drawing, as specified and directed.

SHANMUGA TRADERS

p.chinnasamy