Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC GALI NO 4 GAUSHALA ROAD VIKASH NAGAR RAMGARH CANTT RAMGARH JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | L1 | Accepted-AOC AOC ACCEPTED | |
| 2 | L2₹21.9 L+₹2.1 L (10.6%)Rejected-AOC | L2 | Rejected-AOC AOC NOT ACCEPTED | |
| 3 | L3₹22.9 L+₹3.1 L (15.8%)Rejected-AOC | L3 | Rejected-AOC AOC NOT ACCEPTED | |
| 4 | L4₹23.9 L+₹4.1 L (20.8%)Rejected-AOC | L4 | Rejected-AOC AOC NOT ACCEPTED | |
| 5 | L5₹24.2 L+₹4.4 L (22.2%)Rejected-AOC | L5 | Rejected-AOC AOC NOT ACCEPTED |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RAMGARH CANTT
GE RAMGARH CANTT, JHARKHAND, PIN 829122
PERIODICAL SERVICES TO OTM AND MD ACCN TO CERTAIN BUILDINGS AT PRC MES ASC DAD AND MINOR UNITS AT RAMGARH CANTT
2022_MES_549602_1
8300/3110/E8
Open Tender
Civil Works
Item Rate
180 days
GE RAMGARH
Class E Cat a(i)
7 documents required · 7 mandatory
₹500
Yes
GE RAMGARH CANTT
₹44,000
Yes
22 Oct 2022
3 Sept 2022
5 Oct 2022
3 Sept 2022
3 Oct 2022
19 Sept 2022
60 days
Amount
M & L for complete removal of existing treatment by scraping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having diameter of 7"/9": to make the surface free from dust, loose paint etc., by skilled labour complete all as directed.
M & L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre, the spray machine should be of approved manufacturer with pro guard technology and capacity of tracking pressure and paint usage and certificate by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hard to reach areas and penetration of distemper on the surface, complete all as specified and as directed. Note: Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment by paint manufacturer.
M & L for applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre, the spray machine should be of approved manufacturer with pro guard technology and capacity of tracking pressure and paint usage and certificate by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hars to reach areas and penetration of distemper on the surface, complete all as specified and as directed. Note: Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment by paint manufacturer.
M & L for applying one coat of oil cement base paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre, the spray machine should be of approved manufacturer with pro guard technology and capacity of tracking pressure and paint usage and certificate by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hars to reach areas and penetration of distemper on the surface, complete all as specified and as directed. Note: Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment by paint manufacturer.
M & L for applying two coats of oil cement base paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 metre, the spray machine should be of approved manufacturer with pro guard technology and capacity of tracking pressure and paint usage and certificate by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spary in hars to reach areas and penetration of distemper on the surface, complete all as specified and as directed. Note: Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment by paint manufacturer.
M & L for two coats of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive and colour stay Technology. Excellent Dirt Pick up resistance with low volatile orgarnic compound (VOC) less than 50 gram/litre as per LEEDS specification, Anti algal properties in two coats @ 1.79 lit (undiluted) 10 sqm diluted with water as per manufacturers instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Lit per minute having a pressure of 3300 PSI. Allow 6-8 hours to dry the surface in both the coats of paint complete all as specified. Note for item 1 to 6: (a) The work pertaining to periodical services and water proofing shall be executed from authorised applicator through manufacturer of which the materials i.e. Paint, Distemper, cement base paint, putty etc., is proposed to be use by the contractor and approved by Garrison Engineer (b) The lowest bidder shall submit "Memorandum of Understanding" (MOU), along with the documents, with manufacturer mentioned in the contract.
M & L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash. Note:- Quoted rate shall be deemed to be included for work in buildings/structure (like staircase, mumpty, OHT, Shed, Sump etc.,) of any height including necessary scaffolding.
All as per item No. 7 here-in-before but two coats of whitewash.
M & L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash.
Taking down cement plaster of any description and in any position including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.
M & L for rendering 15mm thick in Cement mortar (1:4) on chajjas/lintel etc. and finished even and fair without using extra cement in patches, complete all as specifed and as directed.
M & L for rendering 15mm thick on fair faces of walls surface work in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and as directed.
M & L 5 mm thick rendering in cement mortar (1:4) on concrete surfaces of ceiling finishing even and fair without using extra cement, complete all as specified and as directed.
M & L for preparation of new surfaces of walls/chajjas/lintel and applying three coats of white wash complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls/chajjas/lintel and applying Two coats of cement base paint (white or tinted) over a coat of alkali resistant primer, complete all as specified & directed.
M & L for preparation of new plastered surfaces of walls/chajja/lintel and applying two coats of oil bound distemper, white or tinted over a coat of chalk whiting, complete all as specified and directed.
M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M & L, for preparation of old decorated surfaces on walls including washing, rubbing down, stopping and applying one coat of cement base paint by applying bump roller applicator white or tinted, complete all as specified and directed.
M & L, for complete removal of existing surface and applying two coats of cement base paint on walls etc., by applying bump roller applicator white or tinted, complete all as specified and directed.
M & L, for preparation of old decoreated surfaces and and applying one coat of oil bound distemper on walls etc., white or tinted by applying bump roller applicator, complete all as specified and directed.
M & L, for preparation of old decoreated surfaces and and applying one coat of oil bound distemper on ceiling, white or tinted by applying bump roller applicator, complete all as specified and directed.
M & L, for complete removal of old treatment by mechanical means from walls and applying two coats of oil bound distemper (OBD), white or tinted over one coat of alkali reistant primer, over two coat of wall care putty and sanding and applying by bump roller applicator, complete all as specified and directed.
M & L, for preparation of newly plastered surfaces of wall providing and applying two or more coats of acrylic smooth exterior paint of required shade new work (two or more coats applied @ 1.67 Ltr/10 Sqm and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm applying by bump roller applicator complete all as specified and directed.
M & L painting of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint(ordinary tint), any colour, complete all as specified and directed by Engr-In-Charge .
M & L painting of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint(ordinary tint), any colour, complete all as specified and directed by Engr-In-Charge .
M & L painting of old wooden surfaces of any description not otherwise described over 10cm width or girth and change of existing colour including removal of scaled paint paint wherever required and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-In-Charge .
M & L painting of old steel surfaces of any description not otherwise described over 10cm width or girth and change of existing colour including removal of scaled paint paint wherever required and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-In-Charge .
M & L for obliterating old writing of any description n.exc 0.10 Sqm with synthetic enamel paint to match existing work and rewriting existing letter, complete all as specified and directed by Engr.-in-charge.
M & L for taking down existing wall finishes, any type by vigorously wire brushing, brooming, dusting and finally washing with water to clean the surface absolutely free from any king of existing finishes and foreign materials, making good minor surface undulations such as holes, dents, cracks etc., in cement mortar (1:3) and applying one coat of putty on the surface with uniform thickness incorporating putty @ 2.00 Kg/Sqm and making surface absolutely smooth on entire satisfaction of Engr-in-Charge and applying two coats of oil emulsion distemper, white or tinted, using bump roller applicator, complete all as specified and as directed.
Removing of trees/ plants including roots from wall / roof top surface and making good the disturbed surfaces before applying finishes, complete all as specified and directed.
Balaji Construction And Company
AASHIRWAD ENTERPRISES
M/s friend enterprises
upadhyay engineers and consultant
M/s Shubham Constructions Co.
Modernage Constructions Pvt. Ltd.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .