SPL REPAIRS TO ROADS, PATH AND CULVERTS AROUND MH AREA AT PANGODE MIL STN UNDER GE (ARMY) TRIVANDRUM

Amount

M&L for repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed.

M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleared surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen at the rate of 5 kg per 10 sqm complete all as specified and as directed.

M&L for bituminous premixed semi dense asphaltic concrete, 40mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-30, rolled and compacted to required camber and gradient with 8 to 10 tone capacity power roller complete all as specified and as directed.

M&L for applying 2 mm thick road marking paint with reflective thermoplastic white road marking paint confirming to BS 3262 (1989),either continues or broken lines over existing or new painting surface of cement or bituminous surface, laid down through road marking machine using thermoplastic material by incorporating the white glass powder for reflectivity in 100 to 150 mm width in white or golden yellow colour by using applicator machine fitted with profile shoe, glass beds dispenser, propane tank heater and profile shoe heater, including cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directed by Engineer-un Charge

Demolition of stone slabs/ tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and remove the rubbish off the premises complete all as specified and as directed.

M&L for 75mm thick cement concrete1:3:6 type C1 using 40mm graded stone aggregate as in pcc sub base flooring complete all as specified and as directed.

M&L for sand filling/cushioning under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed.

Laying only 60mm thick interlocking paver blocks (obtained from item No 7 above ) any shape complete all as specified and as directed.

M&L for PCC 1:2:4, type B1, using 20mm graded stone aggregate as in kerbs or mud stops etc rounded or chamfered etc including necessary form work etc complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and as directed.

M&L for pre-cast solid block masonry made of cement concrete 1:3:6, type C1, using 20mm graded stone aggregate exceeding 10 cm in width and setting in CM 1:4. complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

JEETH CONSTRUCTION