Construction of Medical College Division building HP PWD at Tanda now renamed HP PWD Divisional office building Tanda at Nagrota Bagwan (SH Construction of Building work Water supply and Sanitary installation)

Amount

Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, shoring, strutting or bailing out water (Surface and sub soil water) upto any depth or height any quantum of water including de-watering removal of slush, lift upto any height, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre)layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or wedging out rocks where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height any quantum of water including slush which may arrise during dewatering any other mixed variety of soil, lift upto any height, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths, sides of foundations etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specifications, approved drawing, design, specification and as per the entire satisfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Cutting in earth work in all classification of soil such as Pick work, Jumper work, pick Jumper work, blasting work, hard and soft rock conglomerate rocks chiesling or wedging out rock where blasting is prohibited or any other variety of soil including removal of bushes etcetera including de-watering and proping or bailing out water (Surface and sub-soil water) upto any layers/depths or any quantum of water including slush which may raised during dewatering complete including filling of mud depressions where required including stacking the servicable materials and disposal of unservicable materials as per specifications, approval drawings, design as per the entire satisfaction of and direction of Engineer-in-Charge within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in earth work and filling in 15 cm (Fifteen centimetres) layers in foundation and plinths including ramming, watering and consolidating upto all lead and lift upto any height as per entire satisfaction and direction of Engineer-in-Charge as per drawing, design and specification complete as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Sand filling under floor including watering, ramming, consolidating and dressing complete as per specification, approved design, drawing as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in circular columns, pillars, posts and struts in plan upto all floor including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera; including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in vertical fins and vertical sun breakers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, and entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling in plinth with hard stone approved quality under floor including watering, ramming, consolidating and dressing complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) with minimum cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic metre to give a smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete in all depths/thickness upto all floors levels as per specifications, approved drawing, design as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum comressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/thickness including mouldings, cornices etcetera; upto all floor levels as per specifications, approved drawing, design as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge including incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical and horizontal walls/fins (thickness not more than 0.10m) (Zero point one zero metre) individually or forming box louvers and projected band upto all floor level as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum crushing strength of 20N/mm square with minimum cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor level as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed, vibrated and curing complete for reinforced concrete Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work but excluding the cost of reinforcement for reinforced concrete work up to all floor levels up to all height as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and specifications. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilograms) per cubic metre mechanically mixed and vibrated to give smooth and even surfaces including centring, shuttering but excluding cost of reinforcement as in mouldings, cornices, window sills etcetera to any girth, as per specifications, drawing and design complete, as directed by the Engineer-in-charge.upto floor all levels including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA/Sail/Tisco for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Random rubble masonry coursed with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 ((one cement: six sand: twelve graded crushed stone aggregate 20 mm (Twenty millimetres nominal size) raking out joints in cement mortar 1:6 (One cement : Six sand) and curing complete as per specifications, approved drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glass strip 40mm wide and 6mm thick in flooring in joints terrazzo and cement concrete flooring etcetera complete as per entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick masonry using common burnt clay building bricks in super-structure upto any heights in all floor level in cement mortar 1:6 (One cement: Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class half brick masonry using common burnt clay building bricks in super-structure upto any height in all floor levels in cement mortar 1:4 (One cement: Four sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x19mm (Nineteen into nineteen millimetres) for styles and 15mmx15mm (Fifteen into fifteen millimetres) for top & bottom nails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm (Thirty millimetres) thickness, 70mm (Seventy millimetres) width cut of which 50mm shall be flat and 20mm (Twenty millimetres) shall be tappred in 45 degree angle on either side forming style and 5mm thick, 95mm (Ninety five millimetres) wide, PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetres) wide PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetres) thick, 20mm (Twenty millimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm (One hundred into fifty into one point ninety millimetres) size with necessary screws etc. (Code No. 9.120) of RAJSHRI complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetres) thick Phenol bonded both side prelaminated BWP exterior/interior grade in matt finish of Tesa/Centaury/Kitlam/Green ply ISI marked IS No. 12863 board partition with butt jointing and nails (frame work and cover fillets to be measured and paid for separately as per approved shade of Greenlum or its equivalent as per specifications, drawings design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in doors, windows, ventolators, shutters and partition etcetra with froasted glass panes of 5 to 6 (Five to Six) millimetres thickness of Modi Guard with PVC/Neoprene gaskets etcetra in toilets as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof termit resistant commercial board of Centuary/Alpro ISI marked for shutter of cup board including 6mm (Six millimetres) hard wood edging fixing with nickel plated piano hinges with screws complete shutter from outside shall be finished with 1mm (One millimetres) thick lamination of approved shade in matt finished & painted from inside including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof commercial board in shelves/box of Kit ply /Centuary/Alpro ISI marked for cup board including its shelves and all cut portions of the board shall have 6mm (Six millimetres) thick hard wood edging with butt joints & fixing with nails & screws etc. complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 6mm (Six millimetres) thick ply wood lining of Kitply/Century ply with butt jointing (frame work and cover fillets to be measured and paid for separately) complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetres) thick water proof commercial board in SDB/MDB shutter of Kitply/Centuary ply including all cut portions of the board shall have 6mm (Six millimetres) thick hard wood edging and all exposed portion shall be finished and 0.63 mm (Zero point six three millimetres) thick P.G.I. sheet lining of the shutter inner side of the shutter including fixing with nickel plated piano hinges with screws etc complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing door closer with necessary screws complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing cup-board shutter magnic catcher with necessary screws etcetera complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) size special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete (Indian make) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium pilot sheet on equivalent double action hydraulic floor spring bright finished with nut & screws complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium pilot sheet on equivalent door stopper bright finished with nut & screws complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Fly wire mesh shutter using galvanised S.S. wire guage of I.S. Guage designation 85 G with wire of dia 0.56 mm (Zero point five six milimetres) for doors, windows and clearstorey windows including bright finished/black enamelled iron hinges with necessary screws complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) size aluminium oxidised Pilot/sheel or its equivalent sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium oxidzed seccular anodized transparent or dyed to required colour and shade with necessary screws etcetera.Tower bolts (Barrel type) bright finished with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

200x10mm (Two hundred into Ten millimetres) nominal size

150x10mm (One hundred fifty into Ten millimetres) nominal size

Providing and fixing aluminium Pilot oxidized seccuolar anodized transparent or dyed to required colour and shade handles with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetres) nominal size

100mm (One hundred millimetres) nominal size

75mm (Seventy five millimetres) nominal size

Providing and fixing 150mm (One hundred fifty millimetres) size aluminium Seccolar anodized transparent or dyed to required colour and shade with necessary screws etcetera; hooks and eyes complete including carriage of material within all leads, lifts and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing 50mm (Fifty millimetres) thick cement concrete flooring cement concrete 1:2:4 (One cement : Two sand: Four graded crushed stone aggregate 20mm (twenty millimetres nominal size) laid in one layer finished with a floating coat of neat cement including finishing complete upto all floor level, including carriage of material within all leads, lifts of material and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetres) thick Kota Stone flooring (Mirror polished) of 55x55cms (Fifty five into fifty five centimetres) size of approved shade over base of cement mortar 1:4(One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing/moulding single or double complete including carriage of material within all leads, lifts of material and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying automatic vibro hydraulically compressed and polished precast terrazzo tiles of ISI marked No. 1237 in 50% (Fifty percent) white cement and 50% (Fifty percent) grey cement) in white, yellow, green and maroon chips of chips O,B, 2B sizes of NTC(SG 403-B), the precast terrazzo tiles having size 300x300x25mm (Three hundred into three hundred into twenty five millimetres) with marble chips of specified sizes shall be laid in floors, treads of steps, ramp and landings on a bed of 25mm (Twenty five millimetres) thickness in cement mortar 1:6 (One cement : Six Sand) jointed with cement slurry and mixed with pigment to match the shade of tiles (Wherever required) including rubbing and polishing complete upto all floors levels, including carriage of material within all leads, lifts and other incidental and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Precast terrazzo tiles hydraulic compressed 25 mm (Twenty five millimetres) thick ISI marked N:1237 50% (Fifty percent white and fifty percent grey cement) in white yellow, green and maroon chips of chips O,B.2B sizes of NTC in skirting and risers of steps upto all height on 10mm (Ten millimetres) thick cement mortar 1:3 (One cement : Three sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) upto all floor levels complete including rubbing, nosing and polishing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. (mild steel) IRC Fabric Jali including M.S. (mild steel) frame and necessary screws complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying anti skid ceramic tiles of Premium quality of Somany/Nitco/Rak of minimum 5.5 mm (Five point five millimetres) thick in flooring 300x300mm (Three hundred into Three hundred millimetres) size in treads of steps laid on a bed of 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : three sand) finished with flush pointing in white cement upto all floor levels, including carriage of material within all leads, lifts and other incidental and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetres) thick kota stone slab skirting (mirror polished) in risers of steps, dado and pillars laid on a bed of 12mm (Twelve millimetres) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pgiment to match the shade of the slabs including rubbing, nosing and polishing and moulding complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Cheema Pink/Black granite single slab in flooring laid on 20mm (Twenty millimetres) (average) thick base of cement mortar 1:3 (One cement: Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing and double round nosing complete incluing carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying ceramic glazed tiles 6mm (Six millimetres) thick of IS quality 30x45cm (Thirty into Forty Five centimetres) of Orient/Bell/Rak/Kajaria of approved shade in skirting and dado upto all heights on 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) and jointed with cement slurry including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 60 mm (Sixty millimetres) thick precast cement concrete inter locking paver blocks ISI marked of NTC IS No 15658 in PVC/fibre moulds with vibro compacted upto M-50(M-Fifteen) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Labrador design (rainbow series) of NTC 300x300x25 mm (Three hundred into three hundred into twenty five millimetres) laid on a bed of 20 mm (Twenty millimetres) average thick base of cement mortar 1:4 (One cement : Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, nosing and granite polish finish complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero millimetres) thick prepainted steel sheets (ISI marked-Z120) TATA / Sail/Jindal or its equivalant in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips laying propper Gola/shape 60cm (Sixty centimeters) over all with 0.63mm (Zero point Six three millimetres) thick prepainted sheet ridges with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valley 90cm (Ninety centimeters) over all with 0.63mm (Zero point Six three millimetres) thick prepainted sheet roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 5 (Five) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimeters) wide 25cm (Twenty five centimeters) deep of 0.60mm (Zero decimal six zero millimetres) thick plain G.I. sheet gutter with iron brackets 40x3mm (Forty into Three millimetres) size shall be provided with dome shade grating including bolts, nuts and washers etcetera and making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge complete. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. (mild steel) B.P. sheet 2mm (Two millimetres) thick fixed in eaves board/ceiling/cutting soffits/ceiling including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millmetres) dia pipes on wall face P.V.C (D-Plast) rain water pipes of Supreme/Kisan of working pressure not less than 4.5 kg/cm2 (Four point five kilograms per sqaure centimetres) high density pipe confiming to IS Code 4985-2000 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millmetres) dia plain bend on wall faces P.V.C. (D-Plast) accessories for rain water pipes of Supreme/Kisan high density pipe confiming to IS Code 4985-2000 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-In-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millmetres) dia plain tee on wall faces P.V.C. (D-Plast) accessories for rain water pipes of Supreme/Kisan class-B working pressure not less than 4.5 kg/cm2 (Four point five kilograms per sqaure centimetres) confiming to IS Code 4985-2000including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-in-charge, including entire carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing galvanised M.S. holder bat clamps of approved design to PVC rain water pipe embedded in cement concrete blocks 10x10x20cm (Ten into ten into twenty centimetres) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size including cost of cutting holes and making good the walls etcetera; including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flushing 38cm (Thirty eight centimetres) overall with 0.60mm (Zero point six zero millimetres) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per specifications and as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per approved architectural drawing, design and specification. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections, joints channels, angles, tees frame work for ceiling/false ceiling flats with connection plates or angles, cleat as in trusses, trussed purlins, main and cross beams, hips jack rafters, purlins connected to common rafters and the like of TATA/SAIL in building including cutting, fixing, lifting, hoisting and; placing in position and applying a coat of red lead paint complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised/coloured coating aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S. Angle iron section 25x25x5mm (Twenty five into Twenty five into Five millimetres) thickness including hinges jamb,lock jamb,beed and if required angle threshold of mild steel angle 25x25mm (Twenty five into Twenty five millimetres) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five millimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface complete in all respect as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised/coloured coating aluminium work for shutters of doors windows & ventilators shutters of Jindal/Hindlco aluminium extrusion including providing and fixing hinges/pivots and making provisions for fixing of fittings wherever required including the cost of PVC/neoprene gasket as required (fittings and glazing/panelling shall be paid for separately)with extruded built up standard tubular and other sections of approved make conforming to IS : 733 and IS : 1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/ panelling C.P. brass/stainless steel screws all complete for shutters Jindal shall be used as pe specifications, approved drawing, design as per entire satisfaction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in doors, windows, ventolators, shutters and partition etcetra with glass panes of 6.00 mm (Six millimetres) thickness of Modi Guard with PVC/Neoprene gaskets etcetra as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel knock down railing of KICH AISI Grade 316 OF 50mm (Fifty milimetres) diametres hand rail fixed with 35mm (Thirty five milimetres) dia and 15/20mm (Fifteen/Twenty millimetres) SST baluster (Design code DT 53-2-163) placed at 1200mm (One thousand two hundred milimetres) centre to centre along with 3(Three) numbers at the rate of 16mm (Sixteen milimetres) mid rails connected at the side of balustered with fixture . The balustered would be fixed on the floor with casted based plate minimum 6mm (Six milimetres) thickness based plates shall be consealed with suitable S.S.316 GRADE covered cap railing hight to be taken at the rate of 85cm (Eighty five centimetres) from floor level. The aplication shall be done as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) diametre hand rail slip resistant with round ended joint at two level at 75 and 90cm (Seventy five and Ninety centimetres) height and extend thirty centimetre beyond the top & bottom of the ramp with 25mm (Twenty five millimetre) diametre SST pipe baluster welded to 50mm dia SST pipe embedded in cement concrete 60cm (Sixty centimetre) centre to centre and jointing with electrical gas welding at top alongwith hand rail of as per detail refered drawing No 33 Job no 7704 complete, as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) with Nerolac/ Asian paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on over new wood and wood based surfaces with Nerolac/ Asian paint other than white brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement: Three sand) upto all floor levels complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) upto floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetres) thick cement plasters in single coat on brick/concrete/stone walls for exterior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in door pannel etcetra with Frosted glass panes of 6 mm (Six millimetres) thickness of Modi Guard with PVC/Neoprene gaskets etcetra as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium anodised powder coated grill 8mm (Eight millimetre) thick to existing windows/ventilator with 80mm x 80mm (Eighty millimetre into eighty millimetre) panels with 25x8 mm (Twenty five into eight millimetre) thick aluminium flat in windows and ventilator including fixing with aluminium screws or bolts and nuts complete in aluminium channels base frames (Aluminium channels base frame to be measure and paid for separately) within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with acrylic washable emulsion paint of Heritage/Allteck of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two or more coats) with acrylic oil bound washable distemper of Nerolac/Asian or its equivalent of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with apex weather proof exterior emulsion paint of Heritage/Allteck of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 10mm (Ten millietres) thick anti skid water proof stain and impect resistent heavy duty vetrified Double/Ultra charged matt finish tiles of Kajaria/Nitco and full body matt finish or equivalant 600x600mmx10mm (Six hundred into Six hundred into ten milimetres) manufactured approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying vetrified tiles 600x600 (Six hundred into six hundred) of approved shade in skirting riser of steps and dado Somany, Nitco, Rak laid on a bed of 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : three sand) jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying High density fibreboard substrate with loking system laminated flooring 193 x1214x 12 mm (One hundred ninety three into one thousand two hundred fourteen into twelve millimetres) of Action Tesa/Unitex/LG/Vista required shade to match the shade of teak wood panelling complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8mm (Eight millimetres) thick teak ply paneling upto 135 cm (One hundred thirty five centimetres) height over 50 x 31 mm (Fifty into thirty one millimetres) soft wood grid frame work at 600 mm (Six hundred millimetres) centre to centre with decoretive teak wood beading over teak ply of size 25 x 12 mm (Twenty five into twelve milimetres) having moulding on both side Cornices/Edging on top of penneling to be finished with 55 x 30 mm (Fifty five into thirty milimetres) teak wood beeding including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 60mm (Sixty millimetres) thick interlocking cement concrete paver block vibro compacted upto M-50 grade with 23cm (Twenty three centimetres) half round stone ware pipe for drainage purpose over sub base concrete 1:5:10 (One cement: Five sand: Ten graded crushed stone aggregate with 25 mm (Twenty five millimetres) thick average thickness of cement mortar 1:4 (One cement : four sand) with neat cement slurry mixed with pigment to match the shade of block i/c rubbing and polishing complete including carriage of material within all leads and lifts as per specification. The rate is including of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe Kitec /Kisan U.V. stabilized with carbon black Conforming to IS-15450-2004 for water supply including clamp at appropriate spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (16mm (Sixteen millimetres) Outer diameters pipe

1620 (20mm (Twenty millimetres) Outer diameters pipe

Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe Kitec /Kisan U.V. stabilized with carbon black Conforming to IS-1620 kitec composite fitting including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Kitec Equal Tee

Providing and fixing Kitec Equal Elbow

Providing and fixing Kitec Female Tee

Providing and fixing Kitec Female Elbow

Providing and fixing Kitec Male thread Socket

Providing and fixing Kitec Female thread Socket

Providing and fixing Kitec Female Connector

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty millimetres to Forty millimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in trenches P.V.C. Supreme/ Kisan pipe class "B" soil, waste and ventilating pipes conforming to IS No- 13592-92 fixing with adhesive mixure complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetres) nominal bore/diametres (2.7 mm (Two point seven millimetres) thick pipe

75mm (Seventy five millimetres) nominal bore/diametres (2.2mm (Two point two millimetres) thick pipe

Providing and fixing M.S. holder bat clamps of approved design to C.I. rain water pipe embedded in and including cement concrete blocks 10x10x10cm (Ten into Ten into Ten centimetres) of 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the wallscomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetres) nominal bore/diametres (2.7 mm (Two point seven millimetres) thick pipe

75mm (Seventy five millimetres) nominal bore/diametres (2.2mm (Two point two millimetres) thick pipe

Providing and fixing PVC accessories for sewerage pipe plain bend of Supreme/Kisan conforming to IS No. 14735-99 including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) nominal bore/diametres

75mm (Seventy five millimetres) nominal bore/diametres

Providing and fixing P.V.C. tee medium class of Supreme/ Kisan/ Conforming to IS No-14735-99 ISI marked including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) diametres

75mm (Seventy five millimetres) diametres

Providing and fixing P.V.C. Supreme/ Kisan Collar ISI marked Conforming to IS No-14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) diametres

75mm (Seventy five millimetres) diametres

Providing and fixing P.V.C. Supreme/Kisan cowl ISI marked Conforming to IS No-14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetres) diametres

75mm (Seventy five millimetres) diametres

Providing and fixing PVC Dupreme/Kisan/Astral or equivalent pipe fitting & accessories single for sewerage pipe confirm to IS 14735-99 composite fitting including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetres) diametres PVC Doorl Tee

Providing and fixing 75mm (Seventy five millimetres) diametres PVC Plain Tee

Providing and fixing 40mm x 1.00 mtr. (Forty millimetres into One point zero metre) diametres PVC Long Bend

Providing and fixing 40mm (Forty millimetres) diametres PVC Elbow

Providing and fixing 110x90mm (One hundred ten into nineteen millimetres) nominal size/diameter P.V.C. floor trap Supreme/ Kisan ISI marked Conforming to IS-14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing IS marked No. 2071 of Cera Hindware/Jaquar of star white No 20090 in white colour vitreous china water closet squatting pan (Orrisa type W.C. pan) size 53x41cm (Fifty three into forty one centimetres) orissa pattern (earth work, bed concrete, foot rest and trap to be measured and paid for separately) of approved shade including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Anglo Indian No-2061 of Hindware /Cera of approved shade vitreous china wash down water closet (European type W.C. pan) of Star S No. 20087(S-10) of 57x35x39 with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC 10 (Ten) litres capacity standard control low level flushing cistern No. 502 ISI marked No. 7231 CERA/Hindware and fittings with a pair of C.I. on M.S. brackets and other fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, C.P. brass handles, union and push button, couplings for connection with inlet,outlet and over flow pipe, 40mm dia C.P. (Cromium Plated) flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) nominal bore sand cast iron P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (One cement : One sand) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat solid type and cover for wash down water closet with C.P. brass hinges and rubber buffers matching with shade of European W.C. pan including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back large urinal No 60002 size 39x37.5x59cm (Thirty nine thirty seven point five into into fifty nine centimetres) vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp flat back type Cera / Hindware or equivalent of approved shade including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin I.S. marked No. 10010 Cera / Hindware or equivalent 55x40cm (Fifty five into forty centimetres) with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back Cera / Hindware or equivalent 58x43cm (Fifty eight into forty three centimetres) with single hole No. 10080 under counter basin (under counter basin) with C.I. or M.S. brackets painted white including cutting holes and making good the same with pedestal but excluding fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 161.4 x 54 cm (One hundred sixty one point four into Fifty four centimetres) with bowl depth of 200mm (Two hundred millimetres) Cera/Diamond of approved standard stainless steel kitchen sink with drain board and C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting completeincluding carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing vitreous china pedestal I.S. marked No. 1025 Cera/Hindware of approved shade for wash basin complete with hole at the back for the resption of pipe and fittings including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin (Heavy duty makes ISI marked No. 8931) of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union of Jal/ESS for wash basin or sink.complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P. brass ISI marked IS No. 8934 of Jal/ESS ESS waste pipe for wash basin or sink including brass check nut complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of Jal/ESS (Heavy duty makes ISI marked is No. 8934) for gully floor or Nahni trap including entire carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetres) beveled edge mirror of Hindware/Cera of superior glass mounted on 6mm (Six millimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetres) C.P. brass Towel rail ISI marked IS No. 8934 of Jal/ESS ESS complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etcetera including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetres) glass shelf with C.P. brass Jal/ESS ESS (Heavy duty makes ISI marked IS No. 8934) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of (Heavy duty make ISI marked No- 8934) of Jal/ESS ESS including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600mm x 300mm (Six hundred into three hundred millimetres) vitreous China Division Plate for Urinals including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Chromium plated Jet spray of approved quality and ISI marked No 8934 of Jal / ESS ESS of approved quality and colour with one metre tube complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated PTMT push cock tap of ISI marked of Jal / ESS ESS complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated fancy bib tap of ISI marked No. 8934 of Jal / ESS complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore chromium plated stop cock of ISI marked No. 8934 of Jal / ESS complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass pillar tap with capstan bead of IS marked No. 8934 of Jal/ESS ESS or equivalent complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres brass angle valve without nuts IS marked No. 8934 of Jal/ESS ESS or equivalentcomplete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass full way valve with wheel ISI marked No. 8934) Jal/ESS ESS or equivalent complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetres) nominal bore brass valve ISI marked No. 8934) Jal/ESS ESS or equivalent (Horizontal plunger type)high pressure with copper plate complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass valve (Horizontal plunger) type high pressure with copper plate complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. SINTEX water storage tank having capacity of 1000 (One thousand) liters of ISI 12701 marked. G.I. inlet and outlet connection. 15mm (Fifteen milimetres) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying to level or slopes jointed with approved adhesive salt with PVC Pipe 8mm thick of Supreme or Sant grade A of the 160mm (One hundred sixty milimetres) internal diametres for sewerage line including testing of pies and joints complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One cement : Five sand m: Ten graded crushed stone aggregate 40mm (Forty milimetres) nominal size) bedding for PVC pipe of the 160mm (One hundred sixty milimetres) internal diametres including testing of pipes and joints complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Ujjawal Singh

SANDHIR MALHI

SANJAY SONI