Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st lowest₹39.1 LAccepted-AOC | ₹39.1 L | 1st lowest | Accepted-AOC 1st lowest. |
| 2 | Rejected-Technical | - | - | Rejected-Technical 2nd lowest. |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
24 Jun 2019, 5:00 pmClosed
Executive Engineer
Office of the Executive Engineer Construction Division UttarakhandPeyjal Nigam Bhimtal
Construction of Source Work Pipe line CWR and appurtenant works for Pashtola Water Supply Scheme of Block Bhimtal District Nainital
2019_MDPEY_18186_1
LetterNo 1750/535 (Nivida)/43 Dated 03.06.2019
Open Tender
Civil Works
Item Rate
365 days
Pashtola Block Bhimtal
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,540
Executive Engineer Construction Division UKPJN
₹90,000
3 Feb 2022
11 Jun 2019
26 Jun 2019
11 Jun 2019
24 Jun 2019
12 Jun 2019
Amount
Supply and Installation of French Well as per departmental type design including supply and cartage of materials labour T&P and testing of works Complete.
Excavation in soil mixed with single boulders etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5 M and lead up to 30 M with back filling, watering, ramming of excavated earth in the trenches.Assuming that 90% pipe line is laid in trenches , it is estimated that 75% excavation will be in soil mixed with shingle , bajari & boulders and rest 25% will be in medium rock.
Soil mixed with boulders and bajari
Medium rock
Supply of all materials, Carting from site store to site of work, Laying & Jointing of G.I. screwed pipes (including supply of all jointing materials like specials, white lead, hemp & oil etc) in trenches with its cutting, threading and testing of pipe line and supply of labour ,T&p etc complete in all respect.
40 mm dia
32 mm dia
25 mm dia
20 mm dia
Supply and fixing of the following fittings including cartage of materials labour T&P and testing of valves etc. complete (ii)Wheel valves / Gate Valves (Size in mm)
50 mm dia
Dismantling of following sizes screwed and socketed M S Galvanised pipes ,cutting and threading as per requirenment of site and laying ,jointing of pipe into already excaveted trenches and testing of pipe complete in all respect.
50 mm dia
25 mm dia
Supply of all materials , labour T&P etc. and construct pillar type stand posts as per type design.
Supply of all materials, labour, T&P etc and construction of R.C.C. C.W.R. of following capacities ( in kiloliters ) with MS ladder outside and inside of the tank , M.S. M.H. cover with locking arrangement, ,supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex)/enamal paint, testing,filling water for testing purpose etc. including supply of vertical pipes , specials, and testing of tank, assuming bearing capacity as 8MT/M2
Supply and Installation of Bucket type chlorinator of 25 litr capacity as per departmental type design Complete.
For Valve Chamber ,Repair work & other apprutenent works:- Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. - All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : All work up to plinth level - 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. for angle iron post & strut etc
20 mm cement plaster of mix in 1:2 (1 cement : 2 stone dust)
RR stone masonary in 1:6 cement sand mortar in foundation and plinth including supply of all materials,labour T&P etc. required for proper completion of the work.
Same as above item no 14 (a) but laid in dry
Providing and laying in position cement concrete of specified grade All work up to plinth level - 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of
G.I. wire of dia 4 mm
M/S Rajendra Singh Bisht
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_21898.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .