Electrical Installation Works

Amount

Dismentalling the existing wiring, DBs, Switch Boards, Fittings etc. with CO's own tools and tackles and submit to the section office store incl. transportation charges from worksite to office store as per direction of E.I.C.

Supply and fixing of 10 mm Hylam Sheet board (12"x18") on wall with necy nuts, bolts etc as required incl S & F 3 nos 415 V 200 Amps cut out (Havells make) and 1 no neutral link on Hylam Sheet in angel iron legs as per direction of E.I.C.

Supplying & Fixing 50 mm dia 3.20 metre long (incl. bends) ‘L‘ Type service bracket on wall for carrying 4 wires and an earth wire complete with Galv. clamp for stay, insulators etc.. 7/14 SWG stranded Galv. (Hot Dip) wire for stay with 230x13 mm dia straining screws, 75x88 mm porcelain shackle insulators with Galv. (Hot Dip) strips etc. and painting.

Supplying and fixing 415V, 125 Amp TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make: L&T)

Supplying and fixing sheet steel 125 Amp (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting.

Supplying and fixing 415V, 125 Amp TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. (Make: L&T)

Supplying and fixing double door 6 Way (Up to 160 A) Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make: Legrand)

Supplying and fixing double door sheet steel 6 Way (16SWG), powder coated cable end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment.

Supplying and fixing double door Horizontal 6 Way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make: Legrand)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make: Legrand)

Supplying and fixing 2 Way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. (Make: Legrand)

Supplying and fixing 415 V, 125 Amp Four Pole MCCB of Breaking capacity 25kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. (Make: Legrand)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Make: Legrand)

i) 415V, 100A FP Isolator

ii) 240V, 63A DP Isolator

iii) 240V, 40A DP Isolator

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make: Legrand)

a) 415V, 100A TP MCB

b) 415V, 63A TP MCB

c) 415V, 32A TP MCB

d) 240V, 6-32 A SP MCB

Supplying and fixing 240V, 6-32 Amp SPN MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make: Legrand)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells/ Finolex/ Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

Average run 8 mtr.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells/ Finolex/ Polycab) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.

On Board.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 2 Nos. 6 A, 3 pin Modular type plug socket (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare) with 2 Nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 4 Nos. 6 A, 3 pin Modular type plug socket (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare) with 4 Nos. 6A Modular type switch, without plug top on 2 Row 12 Module GI Modular type switch board with 2 Row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 27Amp OLP 3+ (Plus) A.C. Starter (Make-Electron), Digital display, incl. S&F 4 Module GI Modular type switch board (Make: Legrand-Arteor) after cutting the perpex cover incl. connections as required as per direction of EIC.

Supplying & Fixing GI Modular Switch Board of 2 Module complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (Make: Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V 16 A Modular type switch (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare) on GI Modular type switch board having top cover plate and making necessary connections as required.

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. (Make: Legrand)

Supply & Delivery 250 Volt, 4 Ft. long 18 Watt Single LED Tube Light fittings (Philips, TMC 501 P 1XT-LED 22W P3241) complete with all accessories incl. 1 No. 18/20 W LED Tube (Philips, MAS LEDtube 1200mm 18W865 T8 I – 2100lm)

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling with G.I. 32mm wide, 2mm thick "U"/"L" shaped clamp by fastner, as required as to G.S.

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, nut with G.I. 32mm wide, 2mm thick "U"/"L" shaped clamp by fastner, and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991).

S & Delivery 250 Volt, A.C. Ceiling Fan complete with all accessories (without regulator) (Make-Crompton, Model-Aura Prime Antidust, Colour-Husky Gold), 1200mm sweep.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand - Arteor/ Honeywell-Mk-Wraparound/ Crabtree - Amare) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

S & F 240 Volt, Heavy Duty A.C. Exhaust Fan on wall after making hole on wall and mending good the damages and smooth cement finish etc. and providing 2X1.5 sqmm copper wire and making connection incl. S&F louver shutter on wall as to G.S. (Make- EPC Elect. Pvt. Ltd)

a) 300 mm (9") 1420 RPM

Supply and fixing 240 Volt 9/10 Watt LED Lamp (Philips ACE saver, CDL B22)

S & F 240V, decorative light fittings (Havells, City-2) with 9/10W LED lamp (Make: Philips, B22) on wall on HW Board incl. S&F HW Board and mending good the damages as per direction of EIC.

S & F 240 Volt., 14W LED Surface mounted luminaries with all accessories as per direction of E.I.C. (Make- Philips, Type- SM251C LED20S-6500 PSU WH)

S & F 240V, mirror type light fittings with all accessories as per direction of E.I.C. (Make: Crompton, Linnet, Cat Ref: LCL-14-CDL)

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

S & F LED Bulk head light fitting on wall/ceiling complete with glass . (Make: Philips, Model- EnduraLED Bulkhead, Cat no- WT202W LED6S CW PSU S2 PC)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Havells/ Finolex/ Polycab) in 20mm/ 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

i) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC,

ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC,

iii) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC,

iv) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC,

v) 4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC,

vi) 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC,

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

a) 1.5 Sqmm

b) 2.5 Sqmm

c) 4 Sqmm

d) 6 Sqmm

e) 10 Sqmm

f) 16 Sqmm

Supply & Delivery 1.1KV grade PVC/A. XLPE insulated Aluminium armoured cable (Havells / Polycab/ Finolex)

i) 4 Core 70 Sqmm

ii) 2 Core 6 Sqmm

Laying of cable of 4 Core 70 Sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

Laying of one No. cable of 2 Core 6 Sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable of 2 Core 6 Sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

a) 4 Core 70 Sqmm

b) 2 Core 6 Sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

i) 4 Core 70 Sqmm

ii) 2 Core 6 Sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

i) By ISI-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

a) Solid GI wire of No. 4 SWG

b) Solid GI wire of No. 10 SWG

Erection of Single Steel tubular pole of 2 Mtr. / 9 Mtr. long 80mm dia. G.I. Pipe pole with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.

Supplying & Fixing CI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Havells/ Polycab/ Finolex) of the following sizes in the 19mm heavy gauge Polythene Pipe incl. S&F of the pipe, and by the prelaid GI fish wire and making necy. connection as required. (From Loop Box to Fittings)

i) 3 x 22/0.3 (1.5 sqmm)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) of 40 mm dia. Protection with necessary fittings and jointing metarials as required. (For 2 Core 6Sqmm cable protection)

Supply & Fixing CMDA type Non-detachable 50 mm dia. 2 Mtr. Long arm bracket at an angle 100˚ to 110˚ to horizantal with necessary bolts, nuts etc. incl. painting two coats of Al. paint over one coat of R.O. Primer as per G.S. and as per direction of E.I.C. Single Arm Header.

S & F 36 watt Green Line LED outdoor luminaries (Make- Philips, Model- BRP409 LED CW 036 MR FG S1 PSU GR)

S & F 72 watt Green Line LED outdoor luminaries (Make- Philips, Model- BRP410 LED CW 072 MR FG S1 PSU GR)

S & F 110 watt Green Line Xtra LED outdoor luminaries (Make- Philips, Model- BRP322 LED 110 CW HE MR FG S3 XT)

S & F Landscape Lighting Post Top Lantern type luminaire on suitable size GI Pipe as per direction of E.I.C. (Make- Crompton, Model - LPTO-40-CDL) Mapple.

Supply and Installation of Timer control panel for automatic segmentia switching

i) 2 Module Digital time switch (L&T, Cat No.-AUTS02DIG00) - 1 No.

ii) 16 Way SPN MCB DB (L&T, IP 43 Metal Door, Cat No.-DBSPN016DD)

iii) 32A TP Power contacter with 440V magnet coil- 1Nos (L&T, MNX 40, Cat No.- CS94192)

iv) 32A SP MCB (L&T, C-Curve, Cat No.- BB10320C)- 3 Nos.

v) Indicating lamp (L&T, Cat No.-CS94810DOOO)– 3 Nos.

vi) 40 A FP MCB Changeover (L&T, Cat No.-AUC00404000)- 1 No.

vii) Inter connection by suitable size copper conductor (As per direction of EIC)

Painting of Steel Tubular Pole of 2Mtr. Length, and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

a) One coat of red lead/Zinc chromate priming.

b) 1st coat of synthetic enamel paint over the primer.

c) 2nd coat of synthetic enamel paint over the 1st coat.

Fabrication & Erection Testing & Commissioning of 4' X 3' & 6" depth LED Signage Board: i) Main base structure is made of 1" X 1", 16 SWG MS Square bar with black & others sides are covered with 3mm thick Aluminium Composite Panel (Make: Aludecor/ Armstrong) with necessary support & clamping arrangement with 2 coats of red oxide primer & 2 coats of synthetic enamelled paint (ICI/Asian Paints) along with the following accessories. ii) Front side is covered with 4mm thick acrylic sheet. 12 Sq.ft. iii) 100 micron thick vynile sheet stenciled in following matter pasted in acrylic sheet. iv) The matter should be written as per specified foramt as given by the department. v) 12V, 1.5 Watt IP 67 LED strips (Samsung, Hi-Sign) with other accessories fixed at the back of the board. vi) 12V DC, 400 Watt LED Power Pack in IP 67 Metal casing with other accessories fixed at the back side. vii) The sighn board should be made as per the matter and as per direction of E.I.C. [N.S.]

Supply and delivery of following Spilt type AC machines suitable for operation from Single Phase 230 Volt,50 Hz AC supply with energey effiencient compressor including loading, unloading charges at work sites (Make : O-General / Mitshubishi Heavy Duty)

i) 1.8/2.0 Ton [ 'O'-General-ASGA24FETA, 3Star, R410A or Mitsubishi Heavy Duty - High Airflow - SRK24CS-S6/A, 2 Star ,R410A]

Installation of the following AC Machines' indoor unit on wall and outdoor unit on outside wall by means of duly painted flat/angle iron frame fixed on wall by means of fasteners & bolts including mending good the damages to original finish.

Supply and Installation of copper refrigeration pipe (3/8', 5/8') line with proper installation arrangement including 1.1kV grade 4 core 2.5 sqmm PVC/A XLPE insulated Copper cable (Havells/ Polycab/ Finolex) for connection of indoor unit to outdoor unit incl. Draining line as per direction of EIC.

Supply, fitting and fixing of 32 mm dia PVC hard pipe including necessary socket, bend, tee, nipple, cross, clamp etc for AC's water outlet as per direction of EIC. (Make- Supreme/ Oriplast)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Anchor/Crabtree) & necy. Connections.

S/Installation of 15 litre capacity 2000 watt vertical storage water heater (Geyser) complete with all accessories incl S & F suitable size nuts, bolts screws etc. as required incl. carrying charges.(Make: Venus, Model: Lyra, Colour-Ivory, Panel Colour-Purple)

Supply and fixing (with necessary connection with plugtop,FR copper wire etc) inverter with the following specifications: i) Microtek Sinewave UPS SWE²+ 1625 Inverter ii) Exide Inva Master 150 AH Short Tubular Battery- 2 Nos with required inverter trolley (Microtek)as per direction of EIC.

Supply & Installation of 240Volt, single phase voltage stabilizer (Voltage Range: 150Volt to 300 Volt) for protection of 2 Ton AC Machine complete with all accessories incl S/F suitable size nuts, bolts screws etc. as required incl. carrying charges. (Make: V-Guard, Model ID: VEW 500 Plus For AC upto 2 Ton (90V-300V)).

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST. (ii) All materials, equipments & accessories must conform to relevant IS /IEC specifications. The AC machines to be supplied must be from the OEM/ authorized dealer duly certified by the OEM. (iii) Necessary manufacturer's warranty certificate for AC machine will have to be submitted during delivery of the material. (iv) The AC machines must be warranted atleast for 15 months from the date of Delivery/12 months from the date of commissioning whichever is earlier.

M/S Basak Electrical Repairing House

M/S MAATRI ELECTRICAL and CO