RequiredAnnual Turnover
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Water Truck Cabin Truck With Water Tank ( 3 pieces ) Technical Specifications * As per GeM Category Specification 1/7 Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Engine Capacity (cc) 3298 * Water Tanker Capacity (Litres) 6000 3000
Required6000
Required9000
Required12000 Make of Chassis - * Chassis Model No. - * Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles
RequiredMedium Capacity Commercial Vehicles
RequiredHeavy Capacity Commercial Vehicles Body Style - * Body Options Customizable Customizable
RequiredFixed Side Deck Type of Fuel Diesel Diesel Vehicle Emission Compliance bs iv bs iv Vehicle Mileage (declared by OEM as certified by Test Agency under Rule 115of CMVR 1989)(Km/Ltr) 9.09 Any applicable numeric value Speed
RequiredMax (Km/Hr) 80 More than 80.0 Or higher Engine Power BHP@rpm (BHP@rpm) - 107hp2600rpm
Required125bhp2400rpm Engine Torque Max
Required@ rpm (N- M@rpm) - 350nm1200-1800rpm
Required400nm1300-1600rpm Engine Aspiration Turbocharged Turbocharged
RequiredTurbocharged Intercooled No of Cylinder in Engine(Nos) 4 * Fuel Tank Capacity (Litres) 190 Any applicable numeric value Gradeability of Chassis(%) 28 * Ground Clearance (mm) 210 More than 210.0 Or higher Wheel Base (mm) 3515 More than 3400.0 Or higher 2/7 Kerb Weight (Kg) 3135 Any applicable numeric value Gross Vehicle Weight (Kg) 8720 Any applicable numeric value No of Axle (Nos) 2 * BIS marked Pneumatic Tyres and tubes for both front and rear Yes Yes Chassis Transmission System Manual Manual No. of Speed/Forward Gears 5 * Type of Steering Power Power Turning Radius (mm) 6500 Any applicable numeric value Speed Governers with valid certification Yes * Gross weight of Water Tanker (Kg) 685 Any applicable numeric value Certification Vehicle Certification ARAI/VRDE/ICAT No. - Any applicable text(s) Standard automobile paint to the exterior body as per CMVR Rules for Water Tanker. Yes * Performance Parameters Standard Sparewheel and Tool Kit Yes * Net water carrying capacity (Litres) 5000 More than 5000.0 Or higher Total capacity of water tank (Litres) 5000 More than 5000.0 Or higher Battery Warranty (Months) 12 12
Required24
Required36 Or higher Warranty Time (Month) 12 12
Required24
Required36 Or higher Warranty Distance (Unlimited during warranty period)(Km) Yes * No. Of Free Service 3 3.0 - 20.0 Or higher Constructional Parameters Length of Chassis (mm) 5987 * Width of Chassis (mm) 2035 * Height of Chassis (mm) 2420 * Axle Configuration( Number of Outside - * 3/7 Tyre x Number of Driving Tyre) Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * Size Of Front Tyres - * Size Of Rear Tyres - * Size of Wheel 406 * ABS Fitted No Yes
RequiredNo Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Side View Mirror Yes * Low Fuel warning Light Yes * Fog Lights No * Constructional Details of Cabin truck with water Tank : Seating Capacity (in the cabin) - Any applicable text(s) Seating Capacity layout with dimensions Yes * Nominal Thickness of M.S.Plate used for fabrication of water tank to IS:1730 latest and IS :2062 latest for E-250BR steel grade. (mm) 3.15 * Size of channel used for frame for mounting on chassis. - * Dimensions (L X W X H)(mm) - Any applicable text(s) Relavent surface treatment/paint details for inner surface ensuring the potability of water as per IS Yes Yes
RequiredNo Hat type tube diameter/or other frame for body of main structure welded with/for 25 25
RequiredNA for Monocoque
RequiredNA for factory built cabins 4/7 Monocoque Hat type tube diameter/or other frame( thickness of 1 (dot )6mm(min) for side and roof of main structure welded with for Monocoque - * Base Frame Structure ISMC to be fastened with chassis with U Bolts/for Monocoque (mm) ISMC * Exterior Panel thickness of side body and roof/for Monocoque Steel sheet of thickness 1 mm (min.) * Interior Panel thickness of side body and roof for Monocoque gi sheet of thickness 0 8 mm min * Flooring Made Out from ISI Marked 12 mm thick BWR grade plywood covered with vinyle/Aluminium sheet NA for factory built cabins * Seating Plan:- Co- driver seat suitable for One/two persons (tilt able type/fixed type) Yes * Doors:- Flap type door with fixed toughened glass & locking mechanism manually operated window for Driver
RequiredCo-driver Compartment Yes * Glasses:- Front wind screen
Requiredrear glass in two pieces (toughened type glass as per ARAI approved) Window with lock cum handle Yes * Top portion of fixed glass window & bottom portion in two halves in sliding pattern No * Front Bumper Hook Yes * Rear Hook Yes * Fire Extinguisher Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by 5/7 Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
