BID DOCUMENTS FOR PROPOSED SOLAR PANEL SYSTEM FOR RUNNING OF UBMERSIBLE BORE WELL PUMPS AT EX. WATER WORKS NEAR DEVGADH BAPJI TEMPLE AT DEVGADH BARIYA NAGARPALIKA UNDER: SWARNIM JAYANTI MUKHYA MANTRI SHEHRI VIKAS YOJANA YEAR: 2025-26 (SECOND ATTEMPT).

Total Amount Rs.

Note : 4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor Chief Officer

Devgadh baria Nagarpalika

SECTION-7 BILL OF QUANTITIES-335

DEVGADH BARIA MUNICIPALITY, DEVGADH BARIA

PROPOSED DRILLING OF BORE WELL OF 200/215MM DIA X 90.00 MTR. DEPTH

ITEM QTY. RATE PER AMOUNT

Drilling of 200 / 215 mm dia. bore well in over burden rocky or

loose collapsible / boulder strata & lowering of 175 / 200 mm

1 dia. UPVC / PVC / ERW casing pipe above 12 meters and up to

40 meters depth by DTH rig etc. complete.

Manufacture, supply & delivery of ISI marked UPVC Casing

2 pipe IS 12818 with latest amendment. (Rates are exclusive of

GST). 200.00 mm nominal dia. " CM " Type. 81.00 1444.00 Rmt.

PVC Fittings (Elbows, Nipple, Step Nipple, Union, Plug, Tee, 5% of Total Amount

PVC Fittings (Elbows, Nipple, Step Nipple, Union, Plug, Tee, 5% of Total Amount

Coupling, Reducer). of It. No.

Manufacture, supply and delivery of 80 mm nominal dia.

UPVC column Heavy Duty pipes including PVC socket

4 (coupler), density of pipe 1.38 to 1.43 gm per cm3, OD:

to 88.2 mm, Wall thickness End: 9.8 mm to 11.9 mm, Barrel:

7.3 mm to 9.0 mm, Length: 3 meter. 90.00 520.17 Rmt.

Lowering, laying, fixing and jointing PVC/UPVC/CPVC pipes

and specials of following class and diameter including cost of

5 conveyance from stores to site of works including cost of

labour, material, cement solvent, giving satisfactory hydraulic

testing as per ISI code. 200mm Dia. UPVC Casing Pipe.

5.1 80mm Dia Column Pipe 90.00 19.55 Rmt.

Clamp made from M.S. Plate with 3 holes other side with nuts

6 & bolts of std. Make and suitable size (d) 450 x 65 x 10 mm per

flat suitable to 80mm dia pipe. 1.00 569.10 pair

Supply of best quality of well sorted sevaliya gravel of size

SBD SECTION-7 BILL OF QUANTITIES-336

ITEM QTY. RATE PER AMOUNT

Supply of following size of TOP & BOTTOM accessories i.e.

Adaptor set (CI) long, pump guard set, starter pipe Rubber

8 ring for submersible pump & UPVC column pipe as directed

by Engineer - in - charge with necessary plumbing as desired.

For 80 mm dia. 1.00 2655.00 No.

Geohydrological ground water investigation including vehicle

Compressor test of tube well by air compressor of 600 CFM /

150 PSI capacity in all districts.

SBD SECTION-7 BILL OF QUANTITIES-337

DEVGADH BARIA MUNICIPALITY, DEVGADH BARIA

PROPOSED DRILLING OF BOREWELL OF 165MM DIA x 90.00 MTR. DEPTH

ITEM QTY. RATE PER AMOUNT

Drilling of 165mm dia meter deep bore well by DTH rig in Hard

Rock formation in all talukas of Zone III.

Manufacture, supply & delivery of ISI marked UPVC Casing

2 pipe (IS 12818 with latest amendment. (Rates are exclusive of

GST). 165/175mm nominal dia. " CM " Type. 81.00 906.00 Rmt.

PVC Fittings (Elbows, Nipple, Step Nipple, Union, Plug, Tee, 5% of Total Amount

PVC Fittings (Elbows, Nipple, Step Nipple, Union, Plug, Tee, 5% of Total Amount

Coupling, Reducer).

Manufacture, supply and delivery of 65mm nominal dia. UPVC

column pipes including PVC socket (coupler), density of pipe

4 1.38 to 1.43 gm per cm3, OD : 74.5 to 75.2mm, Wall thickness

End: 9.0 mm to 10.70 m, Barrel: 9.0 mm to 10.70 mm, Length:

3 meter. 90.00 382.88 Rmt.

Lowering, laying, fixing and jointing PVC/uPVC/cPVC pipes and

specials of following class and diameter including cost of

5 conveyance from stores to site of works including cost of

labour, material, cement solvent, giving satisfactory hydraulic

testing as per ISI code. 175mm Dia. UPVC Casing Pipe.

5.1 65mm Dia Column Pipe 90.00 13.80 Rmt.

Clamp made from M.S. Plate with 3 holes other side with nuts

6 & bolts of std. Make and suitable size (g) 450 x 65 x 10 mm per

flat suitable to 65mm dia pipe. 1.00 569.10 pair

Supply of best quality of well sorted sevaliya gravel of size

Supply of following size of TOP & BOTTOM accessories i.e.

Adaptor set (CI) long, pump guard set, starter pipe Rubber

8 ring for submersible pump & UPVC column pipe as directed

by Engineer - in - charge with necessary plumbing as desired.

For 80 mm dia. 1.00 1882.00 No.

SBD SECTION-7 BILL OF QUANTITIES-338

ITEM QTY. RATE PER AMOUNT

Geohydrological ground water investigation including vehicle

Compressor test of tube well by air compressor of 600 CFM /

150 PSI capacity in all districts.

SBD SECTION-7 BILL OF QUANTITIES-339

DEVGADH BARIA MUNICIPALITY, DEVGADH BARIA

S.I.T.C OF 15 HP SUBMERSIBLE PUMPING MACHINERY AT PRO. TUBEWELL FOR EXISTING 5.0 LL UG SUMP WITH 150MM DIA. DIK-7 PIPING ARRANGEMENT AT WAT

WORKS NEAR DEVAGADH BAPJI TEMPLE AT DEVGADH BARIA.

Description of Items Qty. Unit Amount (Rs.)

S.I.T.C. submersible pump set for bore of 150 mm. dia. Or, more having 3 phase motor capacity not more than 15 H.P. and

1 discharge capacity having, Lifting and Lowering taken extra. (C) (10 stage) 600 to 500 L.P.M. at the head 70 to 85 mtrs

suitable for 65/50 mm dia. delivery pipe. Cat.III. 2.00 sets 52199.83

Lowering of submersible motor pump set at the depth of following, complete with required. Nos. and size of casing pipes

erected by means of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take

2 the load of the pump set and pipe assembly filled up with water. Above 60 mtrs. and Up to 120 mtrs.

S.I.T.C of 415V Fully automatic microprocessor based Variable Frequency drive for pump control application as per general

specification as under : The VFD unit shall have modular construction, 6 Pulse Bridge rectifier, speed control by means of

sensorless vector control (open loop), high torque at low frequencies, locking at high and low frequency settings, In-built

PID control, frequency accuracy of ± 0.1 % (min), frequency resolution of ± 0.1 Hz (min), protections against; a) overload

(motor and drive), b) short circuit, c) ground fault, d) input / output phase loss (open circuit), e) stalling, f) input / output

undervoltage (momentary power loss restart), g) input / output overvoltage, h) over-frequency, i) Input surge, j) over

3 temperature of heatsink, k) loss of remote speed signal etc. The VFD shall also have userfriendly programming software &

it shall be capable of at least two level parameter setting with password lock for critical parameters, programming for I/Os,

speed search function, copy parameters (upload / download) to other identical unit, tuning to energy saving mode

(maximum efficiency), event / fault recording (last 5 faults in non-volatile memory) & RS 485 communication port (MODBUS

RTU protocol) with required software. For 11KW.

Providing, Supplying & Laying PVC insulated flat submersible Copper cable as per detailed technical specifications of R/C

4 of GWSSB conforming to IS 694, IEC 60227 / 60228. 1 R x 3 Core x 6 Sq. mm. 100.00 Mtr. 120.00

4.1 1 R x 3 Core x 4 Sq. mm. 60.00 Mtr. 87.00

SBD SECTION-7 BILL OF QUANTITIES-340

Description of Items Qty. Unit Amount (Rs.)

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-

in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the

5 value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2% (C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [B] For Electrical installation up to 11 KV located in other than normal

soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg. 1.00 No 7095.25

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT

6 panel board, Motors etc. using proper clamp. 20.00 Kg. 97.00

Construction of chamber in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in

C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M.

1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete

7 as given size) Upto 1 Mt. depth from G.L. to pipe invert level incl. complete civil works but excl. cost of excavation and

refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (excl. cost of CI-MH Frame

and cover) with 23 mm thick brick masonry wall in C.M.1:6. With Precast Slab in two parts 15 cm : Internal Size of Chamber

Providing, supplying and delivery of CI Manhole frame and cover incl. all taxes, loading, unloading and carting upto

8 departmental stores etc. comp. Size 0.9 m. x 0.90 m. heavy duty - 15 ton capacity. All Type. CI Manhole Frame & Cover.

9 Plywood designed with one side commercial and other side teak finished 15mm. Thick 1.00 Smt. 347.46

Providing and supplying D. I. K-7 grade pipes for following nominal bore diameter with internal cement mortar lining

10 including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS 8329-2000). 150mm Dia Pipes. 35.00 Rmt. 1477.00

Providing and fixing flanged D.I.D.F. / Class K-9 pipes vertically for RCC. Reservoir incl. providing clamps at every 3 mt

11 incl. jointing materials such as nuts, bolts, rubber packing, hydraulic testing and necessary scaffolding etc. complete. For

SBD SECTION-7 BILL OF QUANTITIES-341

Description of Items Qty. Unit Amount (Rs.)

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-

EN-545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994 delivery of specials is

12 to be made to GWSSB store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking,

insurance, inspection charges, octroi etc. complete. With external bitumen & zinc coating & internal cement mortar lining.

Socket & Spigot type. From 80 to 300mm Dia. 30.00 Kgs. 151.00

12.1 From 80 to 300mm Dia. Flange Ended 25.00 Kgs. 158.00

Providing and Supplying ISI mark CI D/F Sluice valves, butterfly valves & Reflux valves of following class and diameter

including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. Sluice valves as per IS - 780 & 2906 / 1984. Sluice Valve ISI Mark only. PN-

1.6 With hand/wheel cap operated (Alt-1 type long body). 150mm Dia Sluice Valve. 2.00 Nos. 6545.00

Providing and Supplying C.I. Air valves of approved make & quality of following class and diameter including all taxes,

14 insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete. Double Acting Air Valve. 40mm Dia Air Valve. 1.00 Nos. 2013.00

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as

per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all

required lead cleaning the site etc. complete for all lifts and strata as specified. In all sort of soil and soft murrum. Upto

Mt. Depth. 8 00 C t 102.35

15.1 In Hard murrum, boulders incl. macadam road. 8.00 Cmt. 155.25

15.2 In soft rock and/or masonry in CM or L M or Lime Concrete 8.00 Cmt. 187.45

15.3 In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by chiseling/breaking only. 8.00 Cmt. 427.80

Lowering, Laying and Joining C. I. S & S Spun pipes suitable for tyton joints/Mortalined D. I. Pipes of various classes with

16 C.I./M.S. specials of following diameters in propoer position, grade and alignment as directed by engineer in charge

including hydraulic testing etc. complete. Tyton joint. 150mm Dia DI Pipe. 30.00 Rmt. 87.40

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly valves, Sluice valves and Air valves

17 including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. For

150mm Dia. 2.00 Nos 672.75

17.1 40mm Dia Air Valve 1.00 Nos. 288.65

Providing and casting in situ C.C. in grade M-20 (proportions as per mix design or as per table9 of IS456 2000 in masses

by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering,

18 formwork, needle vibrated consolidation, curing complete up to 6 meter depth or height (excluding cost of reinforcement

and neat finishing) with centering and shuttering/deshuttering etc. complete for structure other than water retaining (Below

G.L). For Thrust Block. With Form Work. 2.50 C t 6348.00

SBD SECTION-7 BILL OF QUANTITIES-342

Description of Items Qty. Unit Amount (Rs.)

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus stuff as directed within a radius of

Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost

20 of steel and binding wire for reserviors/structures only including lift up to 6 meter height or depth below G.L. for all

diameters. Do-Thermo mechanically Treated (TMT) bars Fe-500 grade for all diameters. 29.00 Kgs 89.12

21 Labour charges for cutting pipes with the help of requisite tools and as directed. 3.00 Rmt. 126.50

Welding in all positions with required number runs, for D.I./ M.S.Pipes internally and/ or externally including gauging

22 wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.

Welding for Pipe thickness above 7mm. 3.00 Rmt. 838.35

Say, Amount Rs.

SBD SECTION-7 BILL OF QUANTITIES-343

DEVGADH BARIA MUNICIPALITY, DEVGADH BARIA

S.I.T.C OF 25 HP SUBMERSIBLE PUMPING MACHINERY AT PRO. TUBEWELL FOR EXISTING 2.40 LL ESR WITH 150MM DIA. DIK-7 PIPING ARRANGEMENT AT WATER W

NEAR DEVAGADH BAPJI TEMPLE AT DEVGADH BARIA.

Description of Items Qty. Unit Amount (Rs.)

1 S.I.T.C. submersible pump set for bore of 200 mm. dia. or more having 3 phase motor capacity about 25 H.P. and

discharge capacity having . Lifting and Lowering taken extra. (B) (8 Stage) 1000 to 750 L.P.M. discharge at the head 87 to

115 mtrs. suitable for 80 mm dia. delivery pipe. Cat. III. 2 sets 69035.52

2 Lowering of submersible motor pump set at the depth of following, complete with required. Nos. and size of casing pipes

erected by means of proper chain pulley block & pipe wrenches after checking of threads of each pipe with coupling to take

the load of the pump set and pipe assembly filled up with water. Above 60 mtrs. and Up to 120 mtrs.

3 S.I.T.C of 415 V Fully automatic microprocessor based Variable Frequency drive for pump control application as per

general specification as under : The VFD unit shall have modular construction, 6 Pulse Bridge rectifier, speed control by

means of sensorless vector control (open loop), high torque at low frequencies, locking at high and low frequency settings,

In-built PID control, frequency accuracy of ± 0.1 % (min), frequency resolution of ± 0.1 Hz (min), protections against; a)

overload (motor and drive), b) short circuit, c) ground fault, d) input / output phase loss (open circuit), e) stalling, f) input /

output undervoltage (momentary power loss restart), g) input / output overvoltage, h) over-frequency, i) Input surge, j) over

temperature of heatsink, k) loss of remote speed signal etc. The VFD shall also have userfriendly programming software &

it shall be capable of at least two level parameter setting with password lock for critical parameters, programming for I/Os,

speed search function, copy parameters (upload / download) to other identical unit, tuning to energy saving mode

(maximum efficiency), event / fault recording (last 5 faults in non-volatile memory) & RS 485 communication port (MODBUS

RTU protocol) with required software. For 18.50KW.

4 Providing, Supplying & Laying PVC insulated flat submersible Copper cable as per detailed technical specifications of R/C

of GWSSB conforming to IS 694, IEC 60227 / 60228. 1 R x 3 Core x 10 Sq. mm. 100 Mtr. 195.94

4.1 1 R x 3 Core x 4 Sq. mm.

SBD SECTION-7 BILL OF QUANTITIES-344

Description of Items Qty. Unit Amount (Rs.)

5 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-

in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2% (C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [B] For Electrical installation up to 11 KV located in other than normal

soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg. 1 No 7095.25

6 Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT

panel board, Motors etc. using proper clamp. 20.00 Kg. 97.00

7 Construction of chamber in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in

C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M.

1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete

as given size) Upto 1 Mt. depth from G.L. to pipe invert level incl. complete civil works but excl. cost of excavation and

refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (excl. cost of CI-MH Frame

and cover) with 23 mm thick brick masonry wall in C.M.1:6. With Precast Slab in two parts 15 cm : Internal Size of Chamber

8 Providing, supplying and delivery of CI Manhole frame and cover incl. all taxes, loading, unloading and carting upto

departmental stores etc. comp. Size 0.9 m. x 0.90 m. heavy duty - 15 ton capacity. All Type. CI Manhole Frame & Cover.

9 Plywood designed with one side commercial and other side teak finished 15mm. Thick 1 Smt. 347.46

Providing and supplying D. I. K-7 grade pipes for following nominal bore diameter with internal cement mortar lining

10 including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. (IS 8329-2000). 150mm Dia Pipes. 35.00 Rmt. 1477.00

Providing and fixing flanged D.I.D.F. / Class K-9 pipes vertically for RCC. Reservoir incl. providing clamps at every 3 mt

11 incl. jointing materials such as nuts, bolts, rubber packing, hydraulic testing and necessary scaffolding etc. complete. For

SBD SECTION-7 BILL OF QUANTITIES-345

Description of Items Qty. Unit Amount (Rs.)

Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-

EN-545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994 delivery of specials is

12 to be made to GWSSB store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking,

insurance, inspection charges, octroi etc. complete. With external bitumen & zinc coating & internal cement mortar lining.

Socket & Spigot type. From 80 to 300mm Dia. 35.00 Kgs. 151.00

12.1 From 80 to 300mm Dia. Flange Ended 25.00 Kgs. 158.00

Providing and Supplying ISI mark CI D/F Sluice valves, butterfly valves & Reflux valves of following class and diameter

including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. Sluice valves as per IS - 780 & 2906 / 1984. Sluice Valve ISI Mark only. PN-

1.6 With hand/wheel cap operated (Alt-1 type long body). 150mm Dia Sluice Valve. 2.00 Nos. 6545.00

Providing and Supplying C.I. Air valves of approved make & quality of following class and diameter including all taxes,

14 insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental

stores, stacking etc. complete. Double Acting Air Valve. 40mm Dia Air Valve. 1.00 Nos. 2013.00

Excavation for pipe line trenches for water supply, sewerage line, manhole etc. all with shoring and struting if required as

per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all

required lead cleaning the site etc. complete for all lifts and strata as specified. In all sort of soil and soft murrum. Upto

Mt. Depth. 8 00 C t 102.35

15.1 In Hard murrum, boulders incl. macadam road. 8.00 Cmt. 155.25

15.2 In soft rock and/or masonry in CM or L M or Lime Concrete 8.00 Cmt. 187.45

15.3 In hard rock and / or in C. C. 1:2:4 or RCC with blasting, breaking, chiseling, or by chiseling/breaking only. 8.00 Cmt. 427.80

Lowering, Laying and Joining C. I. S & S Spun pipes suitable for tyton joints/Mortalined D. I. Pipes of various classes with

16 C.I./M.S. specials of following diameters in propoer position, grade and alignment as directed by engineer in charge

including hydraulic testing etc. complete. Tyton joint. 150mm Dia DI Pipe. 30.00 Rmt. 87.40

Lowering, laying and jointing in position following C. I. / D/F Reflux valves, Butterfly valves, Sluice valves and Air valves

17 including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. For

150mm Dia. 2.00 Nos 672.75

17.1 40mm Dia Air Valve 1.00 Nos. 288.65

Providing and casting in situ C.C. in grade M-20 (proportions as per mix design or as per table9 of IS456 2000 in masses

by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering,

18 formwork, needle vibrated consolidation, curing complete up to 6 meter depth or height (excluding cost of reinforcement

and neat finishing) with centering and shuttering/deshuttering etc. complete for structure other than water retaining (Below

G.L). For Thrust Block. With Form Work. 2.50 C t 6348.00

SBD SECTION-7 BILL OF QUANTITIES-346

Description of Items Qty. Unit Amount (Rs.)

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus stuff as directed within a radius of

Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost

20 of steel and binding wire for reserviors/structures only including lift up to 6 meter height or depth below G.L. for all

diameters. Do-Thermo mechanically Treated (TMT) bars Fe-500 grade for all diameters. 120.00 Kgs 89.12

21 Labour charges for cutting pipes with the help of requisite tools and as directed. 3.00 Rmt. 126.50

Welding in all positions with required number runs, for D.I./ M.S.Pipes internally and/ or externally including gauging

22 wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.

Welding for Pipe thickness above 7mm. 3.00 Rmt. 838.35

Say, Amount Rs.

SBD SECTION-7 BILL OF QUANTITIES-347

DEVGADH BARIA MUNICIPALITY, DEVGADH BARIA

PROPOSED 40 KW SOLAR PANEL SYSTEM WITH NECESSARY COMPONENTS & WATER SPRINKLER SYSTEM, ETC. AT EX.

WATER WORKS NEAR DEVGADH BAPJI TEMPLE AT DEVGADH BARIYA

DESCRIPTION Qty TOTAL Unit AMOUNT

S.I.T.C of Poly Crystline/Mono Crystline PV Module (ALMM approved) with

Cells - 150 Cells or More, Frame Material : Anodized Aluminum alloy Frame

With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered

Glass (AR Coated), High efficency and positive power tolerance Pmax: 0/+5,

Module Efficiency should be approx. 18%-21%, Normal operating temperature

45'C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with

1 Bypass diodes 100% Electroluminescence test to ensure error free Modules,

Thw temp. co-efficient of the PV module shall equal or better than -

0.45%/degree. C. Solar PV modules of minimum fill factor 75% to be used. Unit

Production :- 4 to 5 Unit /kw /day (Actual) (1 Year Avg) With 10 year Product

warranty and 25 year Linear Power Warranty. (E) Moudule o/p Range: 520 -

545 watt & Above, Maximum Power Voltage Vmpp: 41 - 42 V, Maximum Power

Current Impp: 12.5 - 13A.

Supplying and Erecting Seamless Box Pipe of suitable size for rooftop solar

installations with good stability agaist wind, Thickness 2 mm and 80 micron, Hot

Dipped Galvanized steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be suitable for carry the

2 load of solar panel, wiring, sprinkler system etc. with necessary foundation

work/wall mount, j bolt, anchor fastner etc. the nut bolt used for installtion of

stucture should be (SS 304) quality. box. pipe ref. size (A) 40 x 40 x 2mm, (B)

Supplying and Erecting 'C' Channel of suitable size for rooftop solar

installations with good stability agaist wind, Hot Dipped Galvanized steel coils. It

have suitable arrangement for base plate for foundation Screw Arrangement,

3 solar panel mounting, the structure should be suitable for carry the load of solar

panel, wiring, sprinkler system etc. with necessary foundation work/wall mount,

J bolt, anchor fastner etc. the nut bolt used for installtion of stucture should be

(SS 304) quality. 400.00 152.51 Kg

Supplying and Erecting Stainless Steel Nut Bolt (SS 304) for Installation of

4 Solar PV Module, Structures, and other related items with required size as

engineer in charge demands for project Size, length upto 10 x 150 mm.

Providing and Erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables. 3 core 16 Sq. mm.

S.I.T.C of Distribution board from AC Side, ACDB 3-Phase - 11 kW - 20 kW :

AC1 DUTY CONTRACTOR‐40A 4P, 100A MCCB 4P(Cat III), 3 PHASE SPD,

VOLTAGE MONITORING RELAY, ELR WITH CBCT, PHASE INDICATING

LAMP, POWER CABLE & OTHER ACCESSORIES, All switchgears and

connection are enclosed with IP66 Enclosure and operate the MCB position.

SBD SECTION-7 BILL OF QUANTITIES-348

DESCRIPTION Qty TOTAL Unit AMOUNT

S.I.T.C of Distribution board from AC Side, ACDB 3-Phase - 21 kW - 50 kW :

AC1 DUTY CONTRACTOR‐80A 4P, 100A MCCB 4P(Cat III), 3 PHASE SPD,

7 VOLTAGE MONITORING RELAY, ELR WITH CBCT, PHASE INDICATING

LAMP, POWER CABLE & OTHER ACCESSORIES, All switchgears and

connection are enclosed with IP66 Enclosure and operate the position.

S.I.T.C of Distribution System DC Side, DCDB - 10 kW - 20 kW (4 in : 4 out) :

Input Mcb - 1000 V, 16 Amp, 1000 V DC SPD TYPE 2, TERMINAL/END,

PLATE/END CLAMP: 4SQMM (KUT6) FOR OUTPUT, DC CABLE With

suitable size of interconnection. 1.00 10443.40 Ea.

S.I.T.C of Distribution System DC Side, DCDB - 20 kW - 25 kW (5 in : 5 out) :

Input Mcb - 1000 V, 16 Amp, 1000 V DC SPD TYPE 2, TERMINAL/END,

PLATE/END CLAMP : 4 SQ. MM. (KUT6) FOR OUTPUT, DC CABLE With

suitable size of interconnection. 1.00 14723.78 Ea.

Supplying & Errecting MC4 Connector Male - Female Set for Solar DC Cable

which is installed in Solar PV-module/ Inverter/ DCDB etc. 320.00 52.52 Ea.

Providing & Erecting Automatic Solar Panel cleaning system for solar power

projects which includes necessary plumbing work (UPVC pipes and

accessories) from source of water to project site (upto 30 meters), Suitable size

11 of sub mercible/ open well motor, necessary wiring for motor and sprinkler

system with safety, timer circuit for automatically on/off the sprinkler system,

necessary size and number of nozzles/JET (minimum 1 Nozzle/Jet per

module). For 40 KW. 40.00 3681.45 KW

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia

of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having

200-250 Micron galvanising, connection terminal dia of 14 mm with constant

ohmic value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber and heavy

duty cover (A) (approved make OEM has to submit test certificate including

value of earth resistance of installation duly stamped and signed by agency and

12 officer Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound) - Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop :- < 1 volt at no load & dry form, Sulphar content :- <2% (C) Back

fill Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency. For Electrical

installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy

Soil etc. - Length of Pipe : 2 mtr. -Back filling Compound :1 no. Bag of 25 Kg.

Clearing and grubbing road land including uprooting rank vegetation grass

bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (B) By manual in area Hecta

of thorny jungle 0.05 115016.68 re

Boring holes 1.5 m deep in ordinary soil (for cast in situ piles) and getting out

14 the soil and disposal of the surplus excavated soil as directed within a lead of

50 Meter for following diameter of pipes.(iii) 300 mm 69.00 446.06 Rmt.

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8-

15 hand broken stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth 0.49 2679.92 Cmt.

SBD SECTION-7 BILL OF QUANTITIES-349

DESCRIPTION Qty TOTAL Unit AMOUNT

Providing and laying controlled cement concrete M.200 and curing complete

excluding the cost of formwork and reinforcement for reinforced concrete work

in (A) Foundations, footings, Base of columns and Mass concrete

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level 155.00 77.29 Kg.

SBD SECTION-7 BILL OF QUANTITIES-350