Construction of Library Room in Kumar Shala at Village Ankolvadi Ta. Talala, Dist. Gir Somnath

Name of Work :-Construction of Library Room in Kumar Shala at Village Ankolvadi Ta. Talala, Dist. Gir Somnath

Bill of Quantities

Memorandum showing items of works to be carried out

Item Discription of Item (With Brief Specification and reference to Quantity Unit Rate In Amount

No. book of Specification) Figures

In Figure Rs. Ps

1 Excavation for foundation upto 1.50 M.depth including sorting out 14.90 Cum 272.57

&stacking of useful materials i.e. dispositing the excavated stuff

up to all lead & lift (a)Dense or Hard soil.

2 Excavation for foundation upto 1.50 M.depth including sorting out 14.90 Cum 465.14

&stacking of useful materials And dispositing the excavated stuff

up to all lead & lift ©Hard Murrum

3 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 14.86 Cum 2792.52

coarse sand : 8- machine crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of formwork in

(A) Foundation and Plinth

4 Coursed rubble masonry with hard stone of approved quality in 43.17 Cum 3850.13

foundation and plinth in Cement Mortar 1:4 (1-Cement : 4-coarse

sand) etc. complite.

5 Filling available excavated earth (excluding rock) in 56.20 Cum 137.47

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

Whiteby ramming

Stone Bela and watering.

mesonry block in course in superstructure with 22.99 Cum 6671.13

stone of approved quality in Lime Mortar 1:6 (1-Cement :6-

course sand) including packing the joints etc. complete

7 Providing and laying cement concrete 1:3:6 (1- Cement : 3- 1.66 Cum 4192.33

Coarse sand : 6- crushed stone aggregates 20 mm nominal size)

and curing complete including cost of formwork in (A) Wall Caps /

8 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 0.77 Cum 8923.77

2- coarse sand : 4- graded stone aggregates 20 mm nominal

size) for R.C.C Lintel including finishing smooth with,curing etc.

complete including the cost of formwork but excluding the cost of

reinforcement..for above floor upto All Floor level.

Item Discription of Item (With Brief Specification and reference to Quantity Unit Rate In Amount

No. book of Specification) Figures

In Figure Rs. Ps

9 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 0.59 Cum 6730.90

Coarse sand : 4- graded stone aggregates 20 mm nominal size)

for reinforced concrete Chhajjas not exceeding 10cm. thickness

upto floor two level including finishing the exposed surfaces with

cement mortar 1:3 (1-cement, 3 Fine sand) to give a smooth and

even surface centering and formwork and curing complete

excluding cost of reinforcement.above plinth Upto All floor level.

10 Providing & laying C.C. 1:1/2:3 (1 cement ,1/2 course sand,3 2.29 Cum 8035.64

graded stone agg.of 20 mm nominal size) and finishing smooth

with curring etc. comp. incl. the cost of formwork but excl. the

cost of reinforcement for R.C.C. work in. (A) Beam :- Having

cross sectional Area 0.085 to 0.12 Sqm.upto

11 Providing & laying ordinary cement concrete1:1/2:3 (1 cement 8.40 Cum 7258.19

,1/2 course sand,3 graded stone agg.of 20 mm nominal size)

exposed work with curring etc.comp. incl. the cost of formwork

but excluding the cost of reinforce ment for R.C.C. work in. SLAB

:having more then 10cm. and end upto 13cm. thickness.upto All

12 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work 1246.00 Kg 77.29

including bending, binding and placing in position complete upto

All floor level

13 Providing and laying polished kota stone slab 25mm thick in 5.62 Sqm 1161.88

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with

gray cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

14 Provoding and fixing flush door shutters, solid core construction 4.00 Sqm 1829.74

with frame of first class hardwood with cross board and face

veneer or plywood face panels, including anodised alluminium

butt hinges with necessary screws. (B) Non-decorative type and

block board core anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick.

15 Providing 10mm thick cement plaster in single coat on brick / 324.60 Sqm 152.58

concrete walls for interior plastering upto floor two level and

finished even and smooth in (ii) cement mortar 1:3 (1 cement :3

Item Discription of Item (With Brief Specification and reference to Quantity Unit Rate In Amount

No. book of Specification) Figures

In Figure Rs. Ps

16 Providing and laying 24" x 24" vitrified 8mm thick tile flooring over 68.31 Sqm 1324.63

20MM (average) base of cement mortar 1:6 (1- Cement : 6-

Coarse Sand) on new surface or fixing on existing flooring by

adhe-sive material including dismentalling of existing flooring and

jointed with colour cement slurry including finished with flush

pointing and cleaning the surface etc. complete. For Light shade

17 Finishing wall with weather proof exterior emulsion paint on wall 206.94 Sqm 63.19

surface(two coats) to give an required shape even shade after

thoroughly brushing the surface to rempve all dirt, and remains of

loose powdered materials etc complete.

18 Distempeing (Two coats) with oil bound washable distemper of 117.67 Sqm 79.29

approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a priming coat

with alkali resistance primer of approved brand after thoroughly

brushing the surface and other foreign matter and also including

preparing the surface even and sand parpered smooth.

19 STEEL CUPBOARD (BIG): Steel Cupboard with Locker steel 3.00 No 8332.50

cupboard size : 1981x914x483 mm. with 4 adjustable shelf

making five compartment : 20/22 Gauge

20 PREMIUM DESK TABLE: size (Top): 1500x900x750 mm. the 4.00 No 7575.00

table is provided with three drawer on right side and one filling

cabinet is povided on left hand with lock and key the drawer are

made of CRCA sheet. All the tubular section and the drawer unit

is duly open back with amino silkyd paint with apron.

21 VISITOR CHAIR: Good quality well known brand plastic visiting 14.00 No 767.60

chair approved by Engineer-in-Charge.

Item Discription of Item (With Brief Specification and reference to Quantity Unit Rate In Amount

No. book of Specification) Figures

In Figure Rs. Ps

22 Providing, laying and jointing in true line and level 110 diametre 6.00 Rm 918.67

U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

23 Supplying & fixing total Electrification work with wiring including 1.00 Job 9090.00

standard ISI mark modular switches, copper wire gauge minimum

1.5sq. mm & above, 10 Nos of lighing point, 05 nos 15 Watt

LED bulbs Points with 6 Nos of points for ceiling fans,

including electric accesseries under the supervision & as

directed by Engineer-in-charge.

24 Providing and fixing Window having extruded Alluminium Colour 5.80 Sqm 1713.70

anodized Section frame main outer size 63.50 x 38.10 x 1.95mm

(of Jindal Section No. 4605, @ Wt. 1.094 Kg./Rmt.) horizontal

Two Track member size 61.85mm x 31.75mm x 1.20mm (of

Jindal Section No. 8687 @ Wt. 0.695 Kg./mt.) vertical member of

size 61.85mm x 31.75mm x 1.30mm (of Jindal Section No.

@ Wt. of 0.659 Kg./mt.) with Sliding Shttuer of Horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Section No. 8949 @ Wt.

of 0.456 Kg./mt.) Vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section No. 8947 @ Wt. of 0.456 Kg./mt. /

Section 8948 @ Wt. 0.457 Kg/mt.) with 5mm thick transparent

bronze colour tinted float glass with powder coated alluminium

fittings and fixtures and transparent silicon section glass fixing to

frame as per details etc. complete for window

25 Providing & Fixing Marble Takti of Size 60cm x45 m. including 1.00 No 1515.00

carving & painting the letters related to scheme & year as

Dismentled Material Credit Rs. 0 will be deducted from 1 St

Rupees Eight Lakh Forty One Thousand Six Hundred Thirty Eight and Paise Fourteen only

Item Discription of Item (With Brief Specification and reference to Quantity Unit Rate In Amount

No. book of Specification) Figures

In Figure Rs. Ps

I \ We am \ are willing to carry out the work at ……………………… % above\bellow percent ( Should be written in

figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Signature of Contractor

Addl. Asst.Engineer Taluka Development Officer

Taluka Panchayat Taluka Panchayat